Thanks again Jon,
Seems I'm on the right track, I had tried calculating the effective C/R earlier but stumbling through it. Once the shop gets started I'll have the actual calcs but this is a good rough idea.
What is the VE% value on the calculator?
Search found 60 matches
- Fri Aug 20, 2021 7:34 am
- Forum: TECH: 4A-GE ENGINE
- Topic: High C/R & Fuel Octane...
- Replies: 6
- Views: 5476
- Thu Aug 19, 2021 10:23 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: High C/R & Fuel Octane...
- Replies: 6
- Views: 5476
Re: High C/R & Fuel Octane...
Thanks Jondee,
Will be getting on the dyno but I was trying to ballpark and thought there might be a (at least somewhat) accurate way to figure out what would be safe. I'll be somewhere between 11.5:1 and 12:1 but I've still to calculate everything.
Will be getting on the dyno but I was trying to ballpark and thought there might be a (at least somewhat) accurate way to figure out what would be safe. I'll be somewhere between 11.5:1 and 12:1 but I've still to calculate everything.
- Thu Aug 19, 2021 3:08 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: High C/R & Fuel Octane...
- Replies: 6
- Views: 5476
High C/R & Fuel Octane...
Does anyone know to calculate fuel octane required to avoid detonation? I've googled around a bit and honestly haven't found anything conclusive.
Curious at what point does "high" compression warrant leaving 87/89/91 octane pump gas (R+M2) for 96/98/100 octane (or even higher)?
Thank you,
Curious at what point does "high" compression warrant leaving 87/89/91 octane pump gas (R+M2) for 96/98/100 octane (or even higher)?
Thank you,
- Wed Mar 15, 2017 8:17 am
- Forum: Wheels, Tires, Suspension
- Topic: CA - Work Meister S1 15x9 -15 PAIR
- Replies: 4
- Views: 6916
Re: CA - Work Meister S1 15x9 -15 PAIR
Wheels sold, thanks guys!
- Tue Mar 14, 2017 12:55 pm
- Forum: AE86 Parts & Accessories
- Topic: Partout (AE86/Cressida) Updated 2/9/17
- Replies: 7
- Views: 7663
Re: Partout (AE86/Cressida) Updated 2/9/17
4agshoob wrote:Intereated in custom hydro rear brake line.
Text me at 510-566-5296. I can send some photos. Will make a deaaal for the lines WITH the PBM hydro assembly!
- Fri Mar 10, 2017 3:48 pm
- Forum: AE86 Parts & Accessories
- Topic: Wtt: Ae86 manual rack
- Replies: 2
- Views: 3487
Re: Wtt: Ae86 manual rack
I will trade, located in Bay area.
- Wed Feb 15, 2017 4:49 pm
- Forum: Wheels, Tires, Suspension
- Topic: CA - Work Meister S1 15x9 -15 PAIR
- Replies: 4
- Views: 6916
Re: CA - Work Meister S1 15x9 -15 PAIR
Bump, best offer! Comes with tires!
- Fri Feb 10, 2017 8:42 am
- Forum: Wheels, Tires, Suspension
- Topic: CA - Work Meister S1 15x9 -15 PAIR
- Replies: 4
- Views: 6916
Re: CA - Work Meister S1 15x9 -15 PAIR
Photos added, can do trades plus cash if you've got buddy club passenger seat bracket, sway bars, etc. etc. what do you have to barter?
- Fri Feb 10, 2017 8:36 am
- Forum: AE86 Parts & Accessories
- Topic: Partout (AE86/Cressida) Updated 2/9/17
- Replies: 7
- Views: 7663
Re: Partout (AE86/Cressida) Updated 2/9/17
Photos of gt-s seats and jdm wheel added, see bottom of original post for stuff I will trade for!
- Wed Feb 08, 2017 1:07 pm
- Forum: Wheels, Tires, Suspension
- Topic: CA - Work Meister S1 15x9 -15 PAIR
- Replies: 4
- Views: 6916
CA - Work Meister S1 15x9 -15 PAIR
$750 Federal 535 205/50/15 60% chunked wear from track One wheel has two bends on outer barrel, holds air and I used it as-is since purchase. Is repairable. PM, prefer local SF Bay Area pickup https://c1.staticflickr.com/1/758/23224638943_477c37256d_b.jpg IMG_3477-1 by roushman90 , on Flickr
- Wed Feb 08, 2017 12:59 pm
- Forum: AE86 Parts & Accessories
- Topic: Partout (AE86/Cressida) Updated 2/9/17
- Replies: 7
- Views: 7663
Re: Cressida & Ae86 partout (Some ae86/cressida/etc)
Want to part with the supra axle shafts ? Rear end is pending trade, mainly interested in swapping for a 6.7" gt-s complete housing w/ LSD which would be about equal in value to my rebuilt condition 7.5". If the trade falls through, and no one else is willing to swap for it, then I will s...
- Wed Feb 08, 2017 9:00 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB: front coilover - rear ~6k spring - sway bars - rca/nrca - traction brackets
- Replies: 2
- Views: 3042
Re: WTB: front coilover - rear ~6k spring - sway bars - rca/nrca - traction brackets
Thanks but I've got rear shocks already, and have a trade pending for some rear springs
- Mon Feb 06, 2017 8:00 am
- Forum: AE86 Parts & Accessories
- Topic: Partout (AE86/Cressida) Updated 2/9/17
- Replies: 7
- Views: 7663
Re: 1JZ Corona partout (Some ae86/cressida/etc)
Bump, need this stuff gone to fund new build! =)
- Tue Jan 31, 2017 4:09 pm
- Forum: AE86 Parts & Accessories
- Topic: Partout (AE86/Cressida) Updated 2/9/17
- Replies: 7
- Views: 7663
Re: 1JZ Corona partout (Some ae86/cressida/etc)
Bump, pbm hydro dual caliper and stainless lines still available along with 326 power wing, Autometer 5" tachometer
- Tue Jan 31, 2017 3:50 pm
- Forum: Inline 6's and V8's (JZ, G, UZ etc...) and Big Sedans Parts and Accessories
- Topic: 1JZ-GTE & R154 TURN KEY (will trade for a gts)
- Replies: 1
- Views: 11063
Re: 1JZ-GTE & R154 TURN KEY (will trade for a gts)
Motor and transmission SOLD!
- Tue Jan 31, 2017 3:50 pm
- Forum: Want to BUY (seeking sellers)
- Topic: WTB: front coilover - rear ~6k spring - sway bars - rca/nrca - traction brackets
- Replies: 2
- Views: 3042
WTB: front coilover - rear ~6k spring - sway bars - rca/nrca - traction brackets
Looking for:
Front coilover setup - spring ~8k
Rear springs, ~6k/7k
Sway bars - whiteline etc.
Rca or nrca
xt130 corona lca or adjustable
traction brackets
Possibly also:
adjustable tie rod
body braces/strut braces
etc.
Located in Northern California, willing to pay for shipping too
Front coilover setup - spring ~8k
Rear springs, ~6k/7k
Sway bars - whiteline etc.
Rca or nrca
xt130 corona lca or adjustable
traction brackets
Possibly also:
adjustable tie rod
body braces/strut braces
etc.
Located in Northern California, willing to pay for shipping too
- Sun Jan 22, 2017 11:32 am
- Forum: Inline 6's and V8's (JZ, G, UZ etc...) and Big Sedans Parts and Accessories
- Topic: 1JZ-GTE & R154 TURN KEY (will trade for a gts)
- Replies: 1
- Views: 11063
1JZ-GTE & R154 TURN KEY (will trade for a gts)
http://sfbay.craigslist.org/eby/pts/5969820979.html https://www.youtube.com/watch?v=uz_d34JQEJU 1JZ NON-VVTi JZA70 Complete running motor New Bosch starter ECU (new capacitors from DriftMotion) Igniter Full engine harness FMIC 2JZ-GTE 550cc injectors Stock twin turbos Clutch & flywheel R154 tran...
- Sun Jan 22, 2017 11:30 am
- Forum: AE86 Parts & Accessories
- Topic: Partout (AE86/Cressida) Updated 2/9/17
- Replies: 7
- Views: 7663
Partout (AE86/Cressida) Updated 2/9/17
https://sfbay.craigslist.org/eby/pts/5996689904.html Suspension parts below are for X7 Cressida but will fit other Toyotas too: Celica, other Cressidas, Supra, etc. PAIR (2) Work meister S1 15x9 -15 4x114 - SOLD PAIR (2) Falken Azenis 205/50/15 BRAND NEWSOLD PAIR (2) Appliance Mesh 14x7 unknown offs...
- Tue Dec 08, 2015 2:59 pm
- Forum: Automobiles for Sale
- Topic: CA - 1981 TOYOTA CORONA - 1JZ - COILOVERS & MORE
- Replies: 1
- Views: 5034
CA - 1981 TOYOTA CORONA - 1JZ - COILOVERS & MORE
The short list: 1981 Toyota Corona JZA70 SUPRA 1JZ Non-VVTI R154 5-speed transmission, Amsoil 75w90 Custom driveshaft Recently replaced stock twin turbos, stock wastegate 10psi FMIC 550cc 2JZ injectors Walbro 255 3" exhaust w/ custom dual blast tip (extra: flanged daily muffler) Front suspensio...
- Wed Jun 10, 2015 1:45 pm
- Forum: Wheels, Tires, Suspension
- Topic: 15x8 -30 Eagle 028 (Full set + extra pair)
- Replies: 2
- Views: 3952
15x8 -30 Eagle 028 (Full set + extra pair)
Set of 6 Eagle 028, now discontinued model Full set (4) Metallic gray faces 15x8 -30 4x114 & 4x100 (First two pictures) Pair (2) Unpainted faces 15x8 -30 4x114 (Last picture) https://c1.staticflickr.com/1/524/18686446201_6cd733ba86_z.jpg https://flic.kr/p/utfVqV roushman90 https://c1.staticflick...
- Sat Jan 18, 2014 11:39 pm
- Forum: TECH: Corolla AE86
- Topic: DUAL CALIPER MK1 celica supra QUESTIONS
- Replies: 0
- Views: 1569
DUAL CALIPER MK1 celica supra QUESTIONS
Does anyone make a dual caliper bracket for the mk1 celica rear end? Or AE for that matter? And would the AE and mk1 bracket be the same? Since I found the calipers and rotors are different size I'm assuming I may be able to use the AE bracket if I use two pairs of AE calipers and matching rotors/ba...
- Sun Dec 22, 2013 11:19 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB: Old school 90's HKS gauges
- Replies: 0
- Views: 1659
WTB: Old school 90's HKS gauges
Looking for gauges like in the link below, I've got a few leads on boost gauges but still searching for the rest.
http://zilvia.net/f/sale-items/473126-s ... w-box.html
Oil Temp
Water Temp
Oil Pressure
Thanks,
Travis
510-566-5296
http://zilvia.net/f/sale-items/473126-s ... w-box.html
Oil Temp
Water Temp
Oil Pressure
Thanks,
Travis
510-566-5296
- Mon May 13, 2013 10:37 am
- Forum: AE86 Parts & Accessories
- Topic: Kouki Coupe Gt-s Part Out
- Replies: 63
- Views: 38187
Re: Kouki Coupe Gt-s Part Out
Mr.Fujiwara wrote:What is the apint code for that green it looks cool!!!
I wish I knew! It was painted before I bought it, owner didn't know jack. Too bad, I realllyyyyy liked it!
- Mon May 06, 2013 10:00 am
- Forum: AE86 Parts & Accessories
- Topic: Kouki Coupe Gt-s Part Out
- Replies: 63
- Views: 38187
Re: Kouki Coupe Gt-s Part Out
Need both B-pillar plastics. & Both Rear hooks (ones that go above the side windows that you can put like hangers on). & Both front Kicker Panels. Also interested in Front Strut Bar. Located in 02911 I think I have the b-pillar plastic, maybe the hooks. I have both front kick panels. Strut ...
- Mon Apr 29, 2013 12:46 pm
- Forum: AE86 Parts & Accessories
- Topic: Kouki Coupe Gt-s Part Out
- Replies: 63
- Views: 38187
Re: Kouki Coupe Gt-s Part Out
Sold, sold, and sold.
- Sun Apr 21, 2013 11:20 am
- Forum: Wheels, Tires, Suspension
- Topic: 14X6, 14X7 SSR Longchamp, w/ tires
- Replies: 6
- Views: 7095
- Sun Apr 21, 2013 11:17 am
- Forum: AE86 Parts & Accessories
- Topic: Kouki Coupe Gt-s Part Out
- Replies: 63
- Views: 38187
Re: Kouki Coupe Gt-s Part Out
IVIcNinja wrote:Have you sold the kouki eyelids?
Are you talking about the plastic pieces around the headlights? If so,I still have those.
As for the color, it was a repaint and as far as I know not an OEM paint code, and I have no idea what the color code was, I love the green!!
- Sat Apr 20, 2013 10:34 am
- Forum: AE86 Parts & Accessories
- Topic: Kouki Coupe Gt-s Part Out
- Replies: 63
- Views: 38187
Re: Kouki Coupe Gt-s Part Out
EvoMike wrote:Do you have the front suspension dust shields/splash guards?
no sorry.
Stuff is obo, need to get this stuff moving, unexpected emergency with my dog last night so I could use the money.
- Fri Apr 05, 2013 6:26 pm
- Forum: Wheels, Tires, Suspension
- Topic: 14X6, 14X7 SSR Longchamp, w/ tires
- Replies: 6
- Views: 7095
- Thu Apr 04, 2013 1:50 pm
- Forum: AE86 Parts & Accessories
- Topic: Kouki Coupe Gt-s Part Out
- Replies: 63
- Views: 38187
Re: Kouki Coupe Gt-s Part Out
Still have the strut bar,but not really looking to ship!
Harnesses ALL SOLD!
I still have a set of SSR Longchamps left in my room but the Rewinds and 002's are SOLD. PM me if you are interested in the Longchamps.
Harnesses ALL SOLD!
I still have a set of SSR Longchamps left in my room but the Rewinds and 002's are SOLD. PM me if you are interested in the Longchamps.