Search found 26 matches
- Sun Sep 15, 2013 1:35 am
- Forum: TECH: Corolla AE86
- Topic: Wheel Rub Issue
- Replies: 8
- Views: 6522
Re: Wheel Rub Issue
Of course I am open to other companies as well
- Sun Sep 15, 2013 1:29 am
- Forum: TECH: Corolla AE86
- Topic: Wheel Rub Issue
- Replies: 8
- Views: 6522
Re: Wheel Rub Issue
I don't think I can bash it in? I do think the steering is off a bit since it only happens on one side. THAT or the shop I went to replaced the inner tie rod with a different length. Was debating about getting T3's LCA and Outer Tie Rods to help fix this problem. https://technotoytuning.com/toyota/a...
- Wed Aug 28, 2013 2:33 am
- Forum: TECH: Corolla AE86
- Topic: Wheel Rub Issue
- Replies: 8
- Views: 6522
Re: Wheel Rub Issue
Even though I say cheapest route I would prefer something very practical for pushing hard in the canyons
- Wed Aug 28, 2013 2:31 am
- Forum: TECH: Corolla AE86
- Topic: Wheel Rub Issue
- Replies: 8
- Views: 6522
Wheel Rub Issue
Hi Club4ag, Currently I just got my car back from the shop after replacing various parts and aligning my wheels to -2.5 front camber and +2.5 caster. Car feels wonderful from its other setup but I ran into a problem. When turning left I get wheel rub on the inside of my car. Fender has plenty of cle...
- Thu Jul 18, 2013 1:41 am
- Forum: Want to BUY (seeking sellers)
- Topic: 20v BT ISCV
- Replies: 1
- Views: 2083
20v BT ISCV
I am in need of a 20v Blacktop ISCV. Currently my engine is idling at around 2k. My mechanic has tried many options and we opted to just get a new piece. Thank you
-Tim
-Tim
- Thu Jul 18, 2013 1:39 am
- Forum: Want to BUY (seeking sellers)
- Topic: 20v blacktop TPS and distributor
- Replies: 3
- Views: 2907
Re: 20v blacktop TPS and distributor
I have a distributor. PM me
- Thu Jul 18, 2013 1:31 am
- Forum: AE86 Parts & Accessories
- Topic: Assortment of Parts for Sale (updated 12/7/16)
- Replies: 29
- Views: 25309
Re: Misc. Parts for Sale
is it a 16v AC Compressor? I am interested!
- Mon Apr 22, 2013 7:56 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v Blacktop Speedo Cable
- Replies: 5
- Views: 4609
Re: 20v Blacktop Speedo Cable
Oh okay. Any info on part numbers I will need?
- Sun Apr 21, 2013 12:11 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB LSD
- Replies: 3
- Views: 3061
Re: WTB LSD
DELETE. Got one already.
- Sun Apr 21, 2013 12:11 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v Blacktop Speedo Cable
- Replies: 5
- Views: 4609
20v Blacktop Speedo Cable
Hi I had an issue with my speedometer not ready correctly when I still had a 16v. It was over by about 15mph. I am dropping in a 20v Blacktop right now and I was wondering what speedo cable I would need. Any one have info on what part number I will be needing?
Thanks,
Tim
Thanks,
Tim
- Sat Apr 13, 2013 2:50 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB LSD
- Replies: 3
- Views: 3061
WTB LSD
Looking for a LSD for my 1986 Corolla GTS either One way or 1.5
Shoot me an email at timochu@ymail.com I am So Cal based.
Shoot me an email at timochu@ymail.com I am So Cal based.
- Sun Mar 03, 2013 1:47 am
- Forum: TECH: 4A-GE ENGINE
- Topic: New 4A-GE 20V Blacktop engine harnesses!
- Replies: 13
- Views: 11962
Re: New 4A-GE 20V Blacktop engine harnesses!
RW Bliss wrote:I would like to order a basic version with COP add on. I do need it converted to gts spec, but can u guys add the wiper connector without me having to send in my harness?
Here too.
- Sun Mar 03, 2013 1:45 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 20V: Alternative Ignition: COPs - batch fire
- Replies: 30
- Views: 33347
- Thu Feb 28, 2013 1:57 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
Will definitely look into that. Thank you for the heads up.
For clarification... is this 20v blacktop ecu part number ok? 89661-1A860
It doesn't match any of the numbers here on this web page http://club4ag.com/tech-specs/4a-ge-20v ... ification/
For clarification... is this 20v blacktop ecu part number ok? 89661-1A860
It doesn't match any of the numbers here on this web page http://club4ag.com/tech-specs/4a-ge-20v ... ification/
- Sat Feb 23, 2013 4:05 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
Yea they were coolant lines and yea they were just the rubber hose. Me and my friend took apart the engine and concluded to go with the 20v engine. Pretty much I'm not the genius one here and I am taking his word that it is easier to just swap the engine than to rebuild it but before that while I ha...
- Sat Feb 09, 2013 3:23 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
I just cut them. Didn't want to bend anything. With that being said... It is out. Finally. Phew
- Sat Feb 09, 2013 1:42 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
crossmember is out, drive shaft is out, engine is coming out smoothly until I noticed two tubes in the back of head connected to something by the firewall. Can't seem to pry them off so should I just cut the tubes? They are flexible.
- Sat Feb 09, 2013 12:37 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
Ok thanks for all the info. Hopefully tonight it will come out willingly
- Fri Feb 08, 2013 3:18 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
For the ac compressor I just unbolted it from the block and it seems to hang just fine with the tubing it came with. Just going to move it to the side and out of the way when I pull the engine out. Power steering I just undid the line going to the pulley and drained the fluid out. Right now I am all...
- Fri Feb 01, 2013 5:28 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
OK update on removing the engine. Got just about 95% of the wires labled and removed. Main thing in my way right now is the AC compressor, some other pulley above it, and power steering. My questions now are... 1) Can I remove the compressor from the block and still pull out the engine to not let ou...
- Fri Jan 25, 2013 6:05 pm
- Forum: TECH: Corolla AE86
- Topic: 20v Swap Checklist
- Replies: 4
- Views: 4122
Re: 20v Swap Checklist
I have no doubt I will run into trouble especially me being so new to cars. Thankfully I do have another car I can use. I do have some friends who have worked on cars and such. I have been asking them for help but I feel like I need to do my share of work and research as well. Not only that, they al...
- Fri Jan 25, 2013 2:51 am
- Forum: TECH: Corolla AE86
- Topic: 20v Swap Checklist
- Replies: 4
- Views: 4122
20v Swap Checklist
Hi, Currently planning on swapping my 16v for a 20v. I have read http://club4ag.com/?page_id=145 and am aware of some of the specifics but I was confused on some of them. I know for a fact I will have to... 1) get a new ECU 2) relocate the distributor. Anyone try this? http://s-86.com/20v_dizzy_relo...
- Fri Jan 25, 2013 2:51 am
- Forum: TECH: Corolla AE86
- Topic: 20v Swap Checklist
- Replies: 0
- Views: 1857
20v Swap Checklist
Hi, Currently planning on swapping my 16v for a 20v. I have read http://club4ag.com/?page_id=145 and am aware of some of the specifics but I was confused on some of them. I know for a fact I will have to... 1) get a new ECU 2) relocate the distributor. Anyone try this? http://s-86.com/20v_dizzy_relo...
- Mon Jan 21, 2013 11:02 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
Thanks! Just got the fluid out and was wondering what the top was for.
-Tim
-Tim
- Mon Jan 21, 2013 9:10 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Re: Removing 4ag. Also transmission drain plug?
Ok so After more researching I found this link. I guess there are two plugs to drain from?
http://img218.imageshack.us/img218/843/ ... aseof1.jpg
-Tim
http://img218.imageshack.us/img218/843/ ... aseof1.jpg
-Tim
- Mon Jan 21, 2013 8:59 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Removing 4ag. Also transmission drain plug?
- Replies: 17
- Views: 11683
Removing 4ag. Also transmission drain plug?
Hi I am getting ready to swap out my engine and I can't locate the drain plug for my transmission. Yes I am new physically working with cars and this is my first big project if you will. Any write ups with photos on what I should do to remove the engine would be fantastic along with a good place to ...