Search found 36 matches

by tlea
Wed Jun 09, 2021 10:07 am
Forum: TECH: Corolla AE86
Topic: AE86 Automatic transmission
Replies: 3
Views: 4362

Re: AE86 Automatic transmission

That is perfect, thank you. The 32116 spacer is what I'm asking about. What I'm calling the flexplate is what they call the gear
by tlea
Wed Jun 09, 2021 7:34 am
Forum: TECH: Corolla AE86
Topic: AE86 Automatic transmission
Replies: 3
Views: 4362

AE86 Automatic transmission

Hi. I have a Blacktop that is being fitted to an automatic trans from a ae86 rwd. Little tricky but flexplate is from MR2 for the 8 bolt crank. My question is this, did AE86 autos use a plate like a spacer between the flexplate and crank? The flexplate that came off the blacktop has that plate behin...
by tlea
Wed Apr 07, 2021 3:42 am
Forum: TECH: 4A-GE ENGINE
Topic: blacktop air box
Replies: 3
Views: 5233

Re: blacktop air box

Thank you. After modifying car to get engine fit modifying the airbox seems relatively easy On a different matter, I am having a custom exhaust header made and anticipate no issues with that but I would assume I want to fit a port for an O2 sensor? Any thoughts of where the location should be in rel...
by tlea
Fri Apr 02, 2021 10:12 am
Forum: TECH: 4A-GE ENGINE
Topic: blacktop air box
Replies: 3
Views: 5233

blacktop air box

Hi again I'm back finally continuing my 20v blacktop into 1960 Morris Traveller conversion (2020 got in the way lol). Engine , trans and rear axle all fit. Sorting out some of the peripheral details and trying to come up with air box set up. The stock box will fit w/o the air inlet so I want to modi...
by tlea
Wed Nov 20, 2019 5:09 pm
Forum: TECH: Corolla AE86
Topic: a42dl wiring
Replies: 3
Views: 4839

Re: a42dl wiring

Those are perfect. Thanks guys
by tlea
Mon Nov 18, 2019 10:19 am
Forum: TECH: Corolla AE86
Topic: a42dl wiring
Replies: 3
Views: 4839

a42dl wiring

Hi. Anyone have a picture of wiring diagram for A42L automatic?
by tlea
Tue Nov 12, 2019 4:26 am
Forum: TECH: 4A-GE ENGINE
Topic: sensor/sender
Replies: 6
Views: 8202

Re: sensor/sender

Got it, Thank you!
by tlea
Tue Nov 12, 2019 4:14 am
Forum: TECH: 4A-GE ENGINE
Topic: Blacktop IAT?
Replies: 3
Views: 6142

Re: Blacktop IAT?

That is perfect, thank you
by tlea
Fri Nov 08, 2019 9:18 am
Forum: TECH: 4A-GE ENGINE
Topic: sensor/sender
Replies: 6
Views: 8202

sensor/sender

Had this left over after assembling my blacktop, what is it and where does it go? Thanks
http://www.saacforum.com/gallery/8-081119102407.jpeg
by tlea
Thu Nov 07, 2019 3:38 pm
Forum: TECH: 4A-GE ENGINE
Topic: conversion revisited
Replies: 13
Views: 11887

Re: conversion revisited

Also while we are on subject of a42dl I need some parts if anybody has parts car. I need dipstick, upper portion of dipstick tube and floor shifter. No cars in yards anywhere in the Northeast us
Thanks
by tlea
Thu Nov 07, 2019 12:21 pm
Forum: TECH: 4A-GE ENGINE
Topic: conversion revisited
Replies: 13
Views: 11887

Re: conversion revisited

I might have gone that route had I known more at the time but already have blacktop motor ready to go. Seemed good choice, plenty of parts available and chassis conversion items
by tlea
Thu Nov 07, 2019 7:58 am
Forum: TECH: 4A-GE ENGINE
Topic: conversion revisited
Replies: 13
Views: 11887

Re: conversion revisited

yes using a42dl trans with MR2 flexplate. Decided on the blacktop just because of modern efi (reliability) 16V engines would be simpler, no vvt, no Japan only parts. Are you a capable mechanic? Or would someone else be doing the work? I'd like to think so, just no 4age experience. Here's my website...
by tlea
Thu Nov 07, 2019 4:53 am
Forum: TECH: 4A-GE ENGINE
Topic: Blacktop IAT?
Replies: 3
Views: 6142

Blacktop IAT?

On a different topic I am setting up my wiring harness for blacktop. This is going in a Morris minor and am using Tweaked universal harness w/ Elite 750 ECU. I have one plug that goes to IAT? (Assume I know very little about 20v engine management systems) I was told IAT is in airbox but I have no pl...
by tlea
Thu Nov 07, 2019 4:45 am
Forum: TECH: 4A-GE ENGINE
Topic: conversion revisited
Replies: 13
Views: 11887

Re: conversion revisited

yes using a42dl trans with MR2 flexplate. Decided on the blacktop just because of modern efi (reliability)
by tlea
Mon Nov 04, 2019 3:30 am
Forum: TECH: 4A-GE ENGINE
Topic: conversion revisited
Replies: 13
Views: 11887

Re: conversion revisited

Its going in a 1960 Traveller. I bought it for my wife but the 50 hp twin carb non synchro trans is a bit of a match for her. Decided a modern EFI auto was the way to go. Once I did my homework the blacktop was obvious choice (compact, reliable, good parts availability and plenty of power) We're jus...
by tlea
Thu Oct 31, 2019 4:37 am
Forum: TECH: 4A-GE ENGINE
Topic: conversion revisited
Replies: 13
Views: 11887

conversion revisited

Hi again. Coming back to this, putting a 20v blacktop/auto trans into 1960 Morris. Just got engine back from machine shop and ready to fabricate mounting in car. Couple questions. I need a starter, are they different automatic from manual trans? Also have not been able to locate block plate for auto...
by tlea
Wed Sep 19, 2018 5:09 pm
Forum: TECH: 4A-GE ENGINE
Topic: Vacuum diagram
Replies: 1
Views: 2894

Vacuum diagram

Does anyone have vacuum for blacktop? Found a bunch for silvertop. Trying to figure which two of the 3 metal tubes the 2 rubber hoses in picture go to and where unconnected one goes.
Image
by tlea
Tue Sep 18, 2018 4:33 am
Forum: TECH: Corolla AE86
Topic: AE86 16V - Alternator Wiring Basics...
Replies: 8
Views: 29144

Re: AE86 16V - Alternator Wiring Basics...

excellent explanation. Thank you
by tlea
Mon Sep 17, 2018 3:41 pm
Forum: TECH: Corolla AE86
Topic: AE86 16V - Alternator Wiring Basics...
Replies: 8
Views: 29144

Re: AE86 16V - Alternator Wiring Basics...

Got it. I I understand what you’re saying but I’m still trying to have a practical application for mine. There will be no charge light unless I provide one. I’m thinking of a normal white that there is a power contact and then a ground contact. I’m not sure what type of light has two power connectio...
by tlea
Mon Sep 17, 2018 11:08 am
Forum: TECH: Corolla AE86
Topic: AE86 16V - Alternator Wiring Basics...
Replies: 8
Views: 29144

Re: AE86 16V - Alternator Wiring Basics...

Great diagram. I am putting 20V in non Toyota chassis so couple of questions B= Battery, got this,. Direct charging return to battery IG= switched ignition source, got it L= Here comes questions. Does this go to light that has other side to switched voltage? S= Just battery voltage? Would seem if ju...
by tlea
Fri Sep 07, 2018 8:25 am
Forum: TECH: 4A-GE ENGINE
Topic: Fuel line question
Replies: 5
Views: 5979

Re: Fuel line question

No I don’t need more pressure but this is going in a non Toyota platform. I’m adopting the tank to an in-line filter and didn’t know how it would work with the 20 V regulator. So on the original 20 v set up the pump pushes full pressure from the tank and isn’t regulated till after it goes through th...
by tlea
Wed Sep 05, 2018 6:17 pm
Forum: TECH: 4A-GE ENGINE
Topic: Fuel line question
Replies: 5
Views: 5979

Re: Fuel line question

So the regulator is after the fuel goes to intake? Can I use an aftermarket adjustable regulator?
by tlea
Tue Sep 04, 2018 6:31 am
Forum: TECH: 4A-GE ENGINE
Topic: Fuel line question
Replies: 5
Views: 5979

Fuel line question

Hi again. I am trying to figure out the fuel line configuration for the 20 V Does the return to the fuel tank come off of the intake? If so where is it located. I am assuming the inlet is the larger banjo fitting at the rear of the engine Also what psi do the systems like to run at? Thanks in advance
by tlea
Wed Aug 22, 2018 6:41 am
Forum: TECH: 4A-GE ENGINE
Topic: engine sealing questions
Replies: 1
Views: 3049

engine sealing questions

Hi. Before we fit the 20V into the car I am re sealing the engine. I ordered new seals and gaskets from Battle garage but there are a few they didn't list. Oil pan= Is this just silicone? lower timing cover (oil pump?) silicone? injector seals- they had a kit that has 4 large/4 small o rings that go...
by tlea
Sun Aug 19, 2018 6:43 am
Forum: Want to BUY (seeking sellers)
Topic: WTB : A42DL auto trans parts
Replies: 0
Views: 2161

WTB : A42DL auto trans parts

I need some parts for an automatic transmission rear wheel drive car. Transmission is a 42 DLR. I need the block plate that goes between the engine and transmission, the transmission oil dipstick and dipstick tube and a starter
Please email me directly at TimothyLea7@gmail.com
by tlea
Sun Aug 19, 2018 6:39 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE automatic
Replies: 26
Views: 22865

Re: 4AGE automatic

I think I understand that but I’m still confused as to what turns it on and off. There is a switch that supplies power through an indicator light which tells if the overdrive is off or on. Then it goes to relay which is also must have a go no go switch controlled by water temperature probably relate...
by tlea
Sat Aug 18, 2018 8:57 am
Forum: TECH: 4A-GE ENGINE
Topic: 4age engine brackets
Replies: 7
Views: 7937

Re: 4age engine brackets

One more question regarding brackets. Will the ae86 air conditioning bracket line the compressor up with the blacktop pulley?
by tlea
Sat Aug 18, 2018 7:29 am
Forum: TECH: 4A-GE ENGINE
Topic: 4age engine brackets
Replies: 7
Views: 7937

Re: 4age engine brackets

jondee86 wrote:
PS: You might find this thread from another site useful...
https://www.dorikaze.net/showthread.php ... e-20V-swap

Wow! Lot of good info in there thanks
by tlea
Fri Aug 17, 2018 4:20 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4age engine brackets
Replies: 7
Views: 7937

Re: 4age engine brackets

by tlea
Fri Aug 17, 2018 3:10 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4age engine brackets
Replies: 7
Views: 7937

4age engine brackets

I am installing a blacktop 4age into a non Toyota (1960 Morris Minor). I need some engine brackets that attach to the block that will give me a starting point to fabricate my frame attachment. I know the 4ac will work to go into a ae86 chassis but they are a bit hard to find and not sure that's my b...