Fixed the timing with a cheapo Harbor Freight timing light.

Finally pulls strong!

Coilover or normal?

Sr5-GTS survivor. Feel free to AMA lol

Hey Trueno Coupe, Your fuel pump should be fine, like Jondee said, keep that tank filled! Sr5 and zenki gts tanks don't have Baffling. Baffling is like a small bowl surrounding your fuel pickup inside the tank. This insures that the last drops of fuel are right where they need to be as opposed to sl...

http://img.photobucket.com/albums/v705/igotrice87/DSC01459.jpg Here's another time i had to pull the 4ag (Spun bearing :? ) If you mod your hood to open up all the way, It leaves plenty of clearance. https://s-media-cache-ak0.pinimg.com/236x/56/b1/08/56b1083c4eacdfe6328d737a6edbb880.jpg

I recommend removing the hood and radiator to make everything easier. 1 - Exhaust, if your down-pipe bolts aren't rusted to hell unbolt that. (Where header separates into 2 peices) Otherwise keep the header in 1 piece attached to the car and unbolted from the head. 2 - Keep engine and tranny in 1 pi...

Subject is Sunroof. lol what direction is this post going?

For sure. thanks

Whats up Saigon

Thanks. T3 also started carrying them as well.

I'm interested in these for a drift set-up, but
I havn't heard anyone trying them with 8k /6K

Great write up!

How much did you spend total?

Still got the dash? how much you want for it?

w. key on, hold your afm door open, if they FP comes on, your COR and AFM should be good to go

2 seconds and dies. I vote that you are running off your cold start.

Yeah @shawowwolf makes life easier too. You can just replace the bulb instead of the entire housing each time!

Wish you would ship that rear bumper, I would give you extra $$

Pics are starting to disappear!

@yoshi. I believe Jondee is trying to rule out CSI for a good reason. Cars will start off the CSI only, with the main injectors doing nothing. Can confuse the person doing the trouble shooting into thinking the main system is functioning properly.

Do you have the H4 conversion housings?

Good to hear. Sometimes it's better to know your limits and get the car back on the road/ Track!

After pics? Wanna see what they did

Is the Kouki rear bumper still available?

cutting strut towers from a donor and welding in is the easiest way imo

Infamous Dr Occa thread
http://forums.club4ag.com/zerothread?id=359&page=1

Great walkthrough build
viewtopic.php?f=7&t=4076

Everything you might need to know.
Also find us in our facebook group "carbed Toyotas"

Nice! GLWS

If you don't have any luck, try the Carb Group

https://www.facebook.com/groups/398244027001492/

That is the reason why JDM AE86 is rated at 127 hp and the usdm is 112..... Map vs AFM.... +other emissions parts.

Ive heard of Honda d17injectors being used. Don't quote me on that though. But yeah you can clean your originals

This is dope! I was hopeing for a DIY on fixing hatch support struts for some reason.

Try the Club4ag facebook group,

Or hit up hachiroku.net. Those guys are based out of your area.

http://www.hachiroku.net/forums/index.p ... e656869e2a

Good luck. pm if you need help w. swap questions, I did a full GTSr5 on mine too

http://www.86garage.com/forums/viewtopi ... =17&t=2822
^Click clack

The only vacuum i have remaining on my car is the break booster. lol