Replied.

Sent you a PM about what I need. Let me know

Still in need to the full setup. Bump

PM'd about the water lines.

I could look all this stuff up, but I'm not. http://www.aeu86.org/technical/ae86-manuals/ Get "AE86 Wiring Diagrams USDM" While you're there.... Download the 4age manual, and the body one. These manuals are invaluable. I downloaded them and printed them up at work, threw em in a binder an...

It definitely will. I'll be sure to note all that down. I do have power mirrors so being able to use them would be great. Haha. What parts of the a/c do they go to?

I've got a few connectors that I'm wondering about. I don't know if anything plugs into them or not, so any help on giving them an ID would be great. Thanks! This is from my Zenki and I'm guessing it's for the door sensor? There's one on each side. http://img.photobucket.com/albums/v505/ST290Web/IMA...

PM Sent.

PM Sent.

No prob guys. I figured it would help a lot of people out like myself...although my issue right now is more stemming from not being able to find all the parts I need to finish my swap, haha.

As the title states, I need the rear wheel drive pieces for the cooling. The back piece of the water pump, the line that runs along the length of the block, and the piece at the rear of the engine. It's basically all the rwd stuff in this thread. Let me know what you have and feel free to pm me.

morgan wrote:Thanks for posting this, hopefully people give me a break and stop asking me to email it to them, lol

No prob. I think it would be better if a mod attached it to a stickied topic but whatever works.

I got bored and had the scans someone else did laying on the HDD so I figured I would turn them into a nicely bookmarked PDF file for those of you who are wanting to do a conversion. It makes everything a whole lot simpler to understand. Here's a link to the .pdf since I don't think I can upload it ...

Do you have the clock bezel and A/c plate/assembly in good shape? If they are, I'm interested. Drop me a PM please.

Bump after a long absence.

If it's a Kouki, Can I get the wiring for the doors? I've got a Zenki and I would rather not start cutting up the harness that I have. Also, a maroon clock bezel would help loads! I might take one of those AFM's off your hands also. Please PM me, and if you wouldn't mind, take a look at this thread ...

I figured it out. I had to remove the plastic guards around the bumper to gain easy access to that last bolt. It was hiding along the underside opposite the side of the fender bolt. Hopefully this helps someone else if they're having issues like I was. Haha.

You probably already got them, but just in case don't forget the bolts along the top of the fender under the hood. Also, a tar-like sealant is applied along the top edge of the fender where it meets the body (inline with the aforementioned bolts). You may have to pull up on the fender a little to b...

heres where the bolts are... 1 near top door hinge 2 down under rocker panel 2 in front behind head light assembly the row along hood in engine bay one support in front of when to wheel well its hard to see and get to the ones behind the head light assy, ill bet those are what you still have on htt...

Up in Portland, why? I'm not selling any parts, just needing some help w/ whatever I can't figure out on my own. =)

I've got a Zenki '84 Sr5 that I'm converting to a GTS. For the wiring harness swap, I need to get off the fender on the driver side. I've taken off all the bolts I could find. The repair manuals I have say to remove the bumper, so I've been trying to do that but no luck. I took out my headlight asse...

Hey everyone! I found some harnesses that look to be off a Zenki AE86. Now my question is what is missing from them if anything. Since I've never taken the wiring out of an AE86 GTS, I figured I would ask here since you all know what it should look like completed and what not. The harnesses all look...

bump.

Bump

If you're willing to part it out some, let me know. I need the AFM and maybe a few other parts you have. =)

Maybe go check for tubing at a Napa/Autozone.

Thanks man! I'm actually trying to get an AFM but haven't found one that I can buy/trade off anyone at the moment. I have yet to build the engine, so I figured I'd go with whatever route would be cheaper for me. Unfortunately the MAP setup is gone so I can't get a hold of that anymore. They never po...

That's all they run in Oregon so that should be fine. Thanks!

I've got someone who's selling an MAP setup for a 4AG in good condition with some parts that I've been looking to get. Now my question is, if I decide to go the route of MAP instead of AFM, can I still pass emissions in Oregon without any major issues popping up? I've been trying to find more inform...

Replied.