Volk TE37s 14x7 0-offset. NO SPACERS REQUIRED AND FITS perfectly.

i've done the manual rack conversion but still not sure I follow. Did you re-center the rack (here's the important bit) on the car with the spacer included? By T3 spacer I assume you mean their high steering angle spacer? The AW11 rack sits differently than the AE86 PS rack so basically the outer ti...

Resolved. 5 lb slide hammer and bearing pullers. popped right out. To install new oil seals, use a 59mm bearing driver.

-Aaron

For those that have removed the axle oil seals from the housing - can you please share how this was performed?i purchased an seal puller (2 hooks) but its clear that that won't work - the seals are in there too snug.

Thanks,
-Aaron

contact bluemoon performance - mr shingo is a Toyota master tech from Japan and builds a lot of race engines. he's done a lot of work for the guys here in SoCal including Ken Gushi (formula drift). He worked on my big port head with Tomei poncams and they're currently (speaking of diffs) doing my di...

Looking for the rear of the water pump that includes the studs for the coolant inlet to bolt into: text me 562-884-2094 -Aaron https://im1.shutterfly.com/media/47a6da04b3127cceeba67047f1db00000030O00AZMmbNi4ZOWQPbz4e/cC/f%3D0/ls%3D00209281332220160425213133781.JPG/ps%3D50/r%3D0/rx%3D720/ry%3D480/ ht...

They looked awesome on your ride - what happened?

haha, killing me Ronny. You know i want these...

send it friends and family and yes, i'll accept. paypal me: aaronlee@ucla.edu and include name and shipping addy in body of payment. -Aaron

any chance you have a set of shortened strut casings you'd be willing to sell? Thanks - Aaron

PRICED REDUCED TO 65 SHIPPED

thanks brother. I have a lot of build pictures on my Instagram account: akc_lee. I don't post YouTube videos often but posted just that one for fun. Gotcha - and I guess to answer your question I don't believe there really is a true GTS throttle cable. my car came with cruise control but I deleted i...

I'm reading your post on my phone so apologies if I'm saying something you've checked but I believe you have a faulty light switch. The dash display illumination control is integrated into the head light switch so yes the fact that the dash lights don't turn on could be an indication. not to ask a d...

what totta said above - if you took the engine out did you burp the coolant/radiator and have the car somewhat angled up on jacks or on drive way to assist with getting the air up and out? air pockets may prevent coolant from properly reaching the temp sensor and hence the ecu may not be getting a c...

you could but unfortunately I wouldn't be able to tell you exactly which other Toyota has the same setup. if I may, you could buy a new one from Cabe Toyota. it's $90 but at least it's instant problem solved and brand new. Sorry i re-read your initial post - what is it exactly you're trying to do si...

The mounting holes should be the same on the firewall for SR5 or GTS - that shouldn't matter. Some GTS' however came with cruise control, so the throttle cable was actually shorter since it went to the cruise control pump and then from there a cable went to the throttle body itself so only the lengt...

They're mostly discontinued here in the US but Cabe toyota is selling for $175 and $10 shipping and Grant from battle garage can order you one from Japan, if needed. I have an extra brand new one I picked up in Japan myself but keeping that just in case. Are you certain you need one tho? Honestly, t...

UPDATED - PRICE REDUCED TO 65 SHIPPED Recently upgraded to FC 4-pot calipers so selling my GT-S calipers. They come with like-new porterfields R4S pads - roughly 50 miles on the pads so for all intensive purposes brand new. Also comes with brand new Russell Performance Speed bleeders valves!! $90 sh...

Mounting brackets including bottom and right side of radio bezel where it connects to including upper hook latch where the glove box latches onto. text me 5628842094 - Aaron

Great information and thanks for the feedback guys. The springs I'm using are variable (more dual rate than progressive). The progressive coils are wound tightly together and are located on the the top and bottom. The center portion has evenly spaced coils, which is the linear rate. Moto's email is ...

Very insightful. What I'm planning to do with the car is mild fun - some auto-x, and the occasional HPDE in between. At the moment I went ahead and installed the entire Prothane bushing kit. The only bushings I didn't replace was for the stock tension rods since I'm using T3 rods in place of. For st...

Thanks Deuce! Your feedback was exactly up the alley of what I was looking to hear! I'm currently running the full Protean bushing kit including new bushings and end links for the OEM GT-S front and rear sway bars. Interesting to hear that you went through several variations but came back to OEM bar...

Hey everyone, Before I go into my question is anyone else having this issue with posting and/or the search function? I think it began ever since the forum was updated not to long ago. I keep getting the following error message: "The specified search backend doesn’t exist." Having said that...

Looking good!

The bracket you posted up top (on the left) - that supports the brake booster vacuum hose to the firewall since the hose needs to go from the booster all the way around to the TVIS.

Oh sorry, I was referring to other Toyota models and the shop, TechnoToyTuning (T3). They make and fabricate ALOT of parts for the 86. check them out @ technotoytuning.com. Aw11 is the first generation MR2. T3 make a bushing for the passenger side of the rack that allows you to attached the AW11 rac...

Haha, I have the same hoist and stand from harbor freight - i know the feeling! The pistons appears to have more than just carbon build-up; looks more like oil... prolly from the headgasket and perhaps oil seeping into the cylinders from the top? The rust on the passage ways def isn't 'normal'. If y...

as a follow-up - here is the image someone already posted elsewhere on club4ag about egr delete:

Ahh, got it. Thank you both very much!

Notnilc20, Looks like you're going straight into it - good for you. I've had parts taking up 4 shelves on a rack so i totally can relate to the dizzying sense of it all. Stay organized, tag everything, take pictures, and take notes on a notepad. I had to do all that just to stay sane! As far as the ...