How many miles would you say are on this engine? Nevermind, just reread the original post.
does it run pump gas?

I could never afford this, but it is a pretty mofo. fffffffuuuuuuuuuuuu!! I need to win the lotto

might show a little low on the comp test since the engine is cold. dont forget to open the throttles all the way when you do the comp test. (i know you knew that, but sometimes silly stuff can thwart the whole mission) Plus, if the engine has been sitting(not running) for awhile the injectors can ge...

here's a link to morgan's DIY valve seal replacement on BT 20v.... The timing part is what you need. http://www.shiftgearblog.com/2011/06/diy-replace-your-valve-seals-4age-20v.html If i can find the link for the 20v engine FSM i will edit it in for you. here it is.... ignition section, IG-9 http://w...

How did the Fuel inlet bolt get burned?

Check the usual suspects, timing(cam and ignition), vac leaks(check all vac hoses), make sure there is water and oil(stupid, yes. you never know), check for vac leaks at injectors, if its still being a PITA, clean Throttle body and check TPS with multimeter.

The electrical idle up valve, with the green plug. its to raise the idle a bit to compensate for electrical load, lights, blinker, etc. I disconnected mine and capped the vacuum ports. The three ports visible in your pic are vacuum for power steering and a/c. if you dont have either, cap them. do no...

Red wrote:Interesting, Where are the other VIN stickers?

Pretty much on anything that can be removed. fenders, hood, doors, trunk, inside of door panels, inside of the rear bumper. They are just printed stickers with a VIN on them. I will take a pic and post it.
One of the anti-theft ideas from the 80s. LOL

I have an '87 black gts coupe, no a/c, manual steering, power windows and sunroof. Almost the whole car, other than the engine and front bumper were original as they have the OEM style VIN stickers(that match my VIN) on all parts

sounds like throw out bearing... maybe. rev clutch out, rattle. rev clutch in, no rattle.

the redtop/small port head flows better and is an upgrade to the big port/bluetop head. Kinda going backwards here.

you can get the caliper rebuild from Cabe Toyota. Herb can hook it up. http://www.cabetoyota.com/index.htm for brakes, check out 88 rotors. sweet, sweet deals. http://club4ag.com/forums/viewtopic.php?f=22&t=650 For brake lines, bearings and what not, check out RPM. rpmautoparts714@YAHOO.COM All ...

I do not think you will need to cut and splice. Couldn't the wires be de-pinned at the plug and switched around? I would love to see these work and the final result.

I have recently noticed that my COR (or something in its general location) is making a single click when I rev the engine past 1500 - 2000 rpms. Is this normal? My car seems to be running fine. She doesn't seem as fast as she was, but that might just be my perception. might be related, might not: Su...