Search found 2896 matches
- Wed Mar 30, 2022 5:04 pm
- Forum: TECH: Corolla AE86
- Topic: Update on AE86
- Replies: 6
- Views: 7161
Re: Update on AE86
Congratulations dude !!! You got yourself a really nice clean car. Nice dyno curves and great sound... you are going to have a lot of fun driving that after all the effort put in over the last couple of years. Be happy... drive safe... jondee86 PS: Did you find out what the issue was with the catchc...
- Sat Mar 26, 2022 3:41 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
totta crolla wrote:The engine now runs with a modified smallport inlet.
Been waiting for this Need to see a pic now !!!!
Cheers... jondee86
- Wed Mar 16, 2022 4:40 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Overheat problem on small port 4AGE
- Replies: 3
- Views: 4758
Re: Overheat problem on small port 4AGE
I can see coolant spill out when rev engine to 2-3k rpm, is that normal? If the engine is warmed up (thermostat open) with the radiator near full, you will see the coolant circulating in the top tank when you have the engine idling. This is normal. Rev the engine and the coolant level will "su...
- Fri Mar 11, 2022 9:51 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Carbed 4AGE dizzy issues
- Replies: 5
- Views: 8934
Re: Carbed 4AGE dizzy issues
And if you can't find the Bosch igniter and coil at your local junkyard, there is another possibility... the venerable 4-pin HEI igniter that was widely used on a range of older carbed US cars, and some early EFI models. These are said to be a dime a dozen in the junkyard, and it should be easy to p...
- Thu Mar 10, 2022 1:56 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Carbed 4AGE dizzy issues
- Replies: 5
- Views: 8934
Re: Carbed 4AGE dizzy issues
OP you are on the right track, except that you will need an igniter to fire the coil. Every time this particular ignition question comes up I think to myself that there has to be a simple solution. A bit of searching brings up one very simple "high energy" setup using these Bosch component...
- Sun Feb 20, 2022 10:42 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Extrude hone small port mani
- Replies: 4
- Views: 5146
Re: Extrude hone small port mani
before & after pix, say nothing about the impact on performance... True... there are a lot more factors involved in improving the performance of a manifold than just smoothing the passages. Even making the passages bigger is not always helpful if it reduces velocity at a critical point. Mirror ...
- Sun Feb 20, 2022 1:08 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Extrude hone small port mani
- Replies: 4
- Views: 5146
Re: Extrude hone small port mani
Extrude honing is an interesting process... results (and opinions) will vary as the saying goes :) It really is a honing process designed to smooth, clean and polish surfaces rather than remove a lot of material. Although there are industrial applications where the workpiece is pressurised and the f...
- Fri Feb 11, 2022 2:17 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Silvertop loosing power while driving..
- Replies: 14
- Views: 12166
Re: Silvertop loosing power while driving..
Ha !!! I am so used to working with MAP sensored engines I forgot that you might have an AFM... my bad :( But good that you got it fixed. Your tech was right... those swing flap AFM's have a switch that has to operate when the engine cranks and starts to suck in some air. If the flap gets sticky and...
- Sun Jan 30, 2022 11:57 pm
- Forum: TECH: Corolla AE86
- Topic: Oil spraying from breather filter on oil catch can
- Replies: 7
- Views: 7666
Re: Oil spraying from breather filter on oil catch can
Here is a video showing the "normal" amount of blowby you should expect from an idling smallport or bigport 4AGE engine in good condition... https://www.youtube.com/watch?v=kZNlBJip518 Blowby increases with rpm, so if you have a a lot of blowby at idle you will likely have way too much at ...
- Sat Jan 29, 2022 9:32 pm
- Forum: TECH: Corolla AE86
- Topic: Oil spraying from breather filter on oil catch can
- Replies: 7
- Views: 7666
Re: Oil spraying from breather filter on oil catch can
Little bit of oil ??? I guess that is a little bit in Texas :D Looks like someone might have had an OOPS when filling the oil and spilled some. There looks lo be oil sitting around the cam cover fixing nut beside the oil filler, and although oil can seep out of old seals the nut would have to be rea...
- Wed Jan 26, 2022 7:25 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
I don't have any data but if I was using the adapter plate I would not be too concerned about any loss of flow due to the taper on one side of the port. If anything it may be helpful in promoting swirl in the combustion chamber and that is something that is said to give a better burn for improved ef...
- Sat Jan 22, 2022 3:24 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Silvertop loosing power while driving..
- Replies: 14
- Views: 12166
Re: Silvertop loosing power while driving..
Those pressures are indicate a normal healthy fuel pressure. The rail pressure increases as you blip the throttle which is how it should be, and the return pressure goes down because more fuel is going into the engine and less back to the tank. Go ahead and replace the fuel pump and filter. I'd be s...
- Sat Jan 22, 2022 1:14 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Silvertop loosing power while driving..
- Replies: 14
- Views: 12166
Re: Silvertop loosing power while driving..
Sounds to me like it running extremely lean... barely enough fuel to support combustion. You definitely want to try the fuel into a bottle test while it is in that condition. An engine needs very little fuel to idle, but once you open the throttle and put a bit of load on the engine the required fue...
- Thu Jan 20, 2022 10:22 pm
- Forum: TECH: Corolla AE86
- Topic: Oil spraying from breather filter on oil catch can
- Replies: 7
- Views: 7666
Re: Oil spraying from breather filter on oil catch can
I am not about to tell you how to break in a new engine, but I will refer you to this link... http://www.mototuneusa.com/break_in_secrets.htm Everyone is an expert on how to break in a new engine and there are a thousand different opinions that tell you that there method is the best. So up to you to...
- Thu Jan 20, 2022 4:37 pm
- Forum: TECH: Corolla AE86
- Topic: Oil spraying from breather filter on oil catch can
- Replies: 7
- Views: 7666
Re: Oil spraying from breather filter on oil catch can
If you have oil spitting out of the breather your catchcan is not working. This image shows the basic requirements for an effective catchcan... https://i.imgur.com/sY3PNl6.png The arrangements of the inlet and outlet can be changed. The outlet can either be piped to the intake vacuum or vented to at...
- Thu Jan 20, 2022 12:33 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Silvertop loosing power while driving..
- Replies: 14
- Views: 12166
Re: Silvertop loosing power while driving..
Love your work allencr ... don't ever change :D I know there can be several different reasons for most intermittent running problems, but I figure checking and eliminating fuel supply as a cause is as good a place to start as any. Fuel is something that can be seen and measured, so more easily under...
- Tue Jan 18, 2022 2:12 pm
- Forum: Troubleshooting / Web Reporting
- Topic: X-Files vs Club 4AG
- Replies: 2
- Views: 4969
Re: X-Files vs Club 4AG
I think that this explains it rather well...
Cheers... jondee86
Cheers... jondee86
- Sun Jan 16, 2022 1:00 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Silvertop loosing power while driving..
- Replies: 14
- Views: 12166
Re: Silvertop loosing power while driving..
It is not possible to upload a video (or pics) directly to this site. You need to upload to a hosting service such as Youtube (or Imgur for pics), and then post the link here. From the information I would say everything points to a fuel supply problem. Either your fuel pump is on the way out or you ...
- Sat Jan 15, 2022 3:31 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Silvertop loosing power while driving..
- Replies: 14
- Views: 12166
Re: Silvertop loosing power while driving..
It certainly sounds like you have a fuel supply problem. So to clarify... 1. Before the problem the engine ran fine... normal power, no hesitation ? 2. Was there a gradual loss of power or did it just lose power completely ? 3. When it started again and you were driving, did the engine run normally ...
- Tue Jan 11, 2022 6:11 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Happy New Year !!!!!!!
- Replies: 2
- Views: 4467
Happy New Year !!!!!!!
Just putting this here so that I can lay claim to the first forum post of 2022
Hope everyone had a relaxing and covid-free holiday break and now are getting
back to work with renewed vigor and hope for a brighter future !!!
Cheers... jondee86
Hope everyone had a relaxing and covid-free holiday break and now are getting
back to work with renewed vigor and hope for a brighter future !!!
Cheers... jondee86
- Mon Jan 10, 2022 1:07 pm
- Forum: Troubleshooting / Web Reporting
- Topic: X-Files vs Club 4AG
- Replies: 2
- Views: 4969
X-Files vs Club 4AG
A couple of days ago I woke up and discovered that more than a month of posting memory had disappeared... it was as if it had never existed ??? No-one else seemed to have noticed anything strange, and I have started to think that I was abducted by aliens and when they finished probing me, they retur...
- Tue Nov 16, 2021 5:23 pm
- Forum: OWNERS and BUILDERS
- Topic: "Kentucky AE86: A Levin Story"
- Replies: 145
- Views: 148774
Re: "Kentucky AE86: A Levin Story"
Looks like you had a great day :) Engine sounds crisp and car sits flat in the corners, so now it is down to seat time and slowly refining your lines and braking points to whittle those lap times down. It is a big psychological barrier to overcome your normal conservative everyday braking habits whe...
- Fri Oct 15, 2021 1:00 am
- Forum: TECH: 4A-GE ENGINE
- Topic: HELP: MSD/Mikuni 4AGE Setup
- Replies: 4
- Views: 6354
Re: HELP: MSD/Mikuni 4AGE Setup
Basically, as I see it, if you want to run a simple MSD ignition only setup without any form of ECU, there are two separate matters to be resolved. Ignition timing is the first, and having a fixed ignition curve (advance vs rpm) is the easiest to implement. I've just been schooling myself on MSD pro...
- Thu Oct 14, 2021 2:37 am
- Forum: TECH: 4A-GE ENGINE
- Topic: HELP: MSD/Mikuni 4AGE Setup
- Replies: 4
- Views: 6354
Re: HELP: MSD/Mikuni 4AGE Setup
It seems to be very difficult to get accurate information as to how you make an MSD box work with a Toyota distributor. The 4AGE distributor has VR (reluctor) pickups inside and MSD instructions only talk about "magnetic" sensors. VR amd magnetic are not the same. VR outputs a weak variabl...
- Mon Oct 11, 2021 8:55 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
Adding a bit of nitromethane to the fuel will get around any breathing problems
Cheers,,, jondee86
Cheers,,, jondee86
- Sun Oct 10, 2021 2:41 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
The Gen 6 Celica intake uses a second set of butterflies (out of the airflow) to change the tuned length of the intake. With the butterflies closed the lower rpm operation is improved. The changeover point is around 5000rpm. https://toyota.epcdata.ru/imgjp/B2/170083A.png This design has longer intak...
- Mon Oct 04, 2021 1:47 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
A few years back I saw a guy in Australia advertising a A40 3-speed that had been modified for drag racing. Actually contacted him as I was thinking about getting an A42DL for my AE at the time. Didn't take it any further but I remember that the A40 had been beefed up to handle some serious power. S...
- Sun Oct 03, 2021 3:46 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
Unfortunately 2T and 3T engines are quite rare in this country. Due to the way the motor industry was controlled here, local assembly of Japanese vehicles in the 60's and 70's was pretty much restricted to base models with pushrod or single cam engines. High performance and sports models with twinca...
- Sat Oct 02, 2021 1:49 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
old mazda 2.2L ran some funky multiplate throttle body/intake design + 2intake/1exhaust valve per cylinder Stock motor, stock computer + $150 holset dyno a whopping 540 ft-lbs tq. Incredible! Dusted some heavyweight street beasts https://www.mx6.com/threads/highest-hp-on-stock-f2t.254026/ Don't kno...
- Fri Oct 01, 2021 8:15 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: TVIS inlet
- Replies: 54
- Views: 30710
Re: TVIS inlet
Jondee, Toyota 4 or 5V-EU HEMI! If you haven't heard of it, 5V is a 4.0 hemi V8, the 4V is 3.4 liters. Yusss... oldeskewltoy is building one. I looked into it a long time ago but even then they were scarce. I figure if I ever build an old V8 it will be a sidevalve. It's nostalgia. The first car I e...