Page 1 of 1

FS: Weber 40, clutches & turbos! (Prices reduced)

Posted: Fri Feb 22, 2013 5:23 am
by XNC
So I've got some stuff kicking around my garage I would love to get rid of. All prices are OBO not including shipping. NRCAs have been sold!

Right now I would prefer to sell, but I would be interested in trading for two things:
  • A lightweight 6-bolt (4afe/7afe) flywheel ala Toda, Aasco, etc
  • A 212mm W58 splined clutch puck/disc

On to the parts! All are BRAND NEW unless otherwise noted. (prices at bottom)
Image

Clockwise from the left:
  • SPEC 212mm 6 puck solid disc, T50 spline puck. I believe it's Stage 2
  • 200mm Competition Clutch brand Stage 2 pressure plate
  • 200mm Competition Clutch Stage 2, 6 puck solid disc. W58 Spline
  • 200mm stock NAPA replacement T50 spline disc


Weber 40/40 carb. I picked up from HR member. Worked amazingly on my 4ac, but only thing that drove me mad was no choke. Had to revv it up a few times when first start on cold mornings, but got me a consistent 24-28mpg. Comes with 4ac adapter plate & redline filter/clamps. (Will be cleaned before shipped)

Carb is still on engine, so if you need more angles, light, etc. just let me know.
Image

Image

Image

Seeing if there is any interest in some turbo junk. Got a CX Racing manifold that I had ceramicoated and a Garrett A/R .80 turbo. Spins freely, comes with some oil lines. Bought from an SR20 owner who was upgrading to a bigger 'bo. That MONSTROSITY of a trubo is a Holset 351VE (variable vane turbo) that I bought a few years ago when I was thinking about a stupidly large turbo build. It needs a cleaning but otherwise works fine.

Image
Image


========PRICES=========
  1. Spec disc $100
  2. CC pressure plate $100
  3. CC disc $75
  4. NAPA disc $20
  5. NRCAS SOLD!
  6. 4ac carb SOLD!
  7. Door panels SOLD!
  8. Weber 40/40 Carb (W/4ac adapter & filter) 175$
  9. Garrett SOLD!
  10. Holset 100$
  11. Manifold 200$

If the CC plate & flywheel are bought together, I will knock price to 150.
If Garrett & Manifold are bought together, I'll knock to 300$

Can also contact via phone/text: 360.Nine oh Nine. Five Oh Two Six.

Re: FS: Brand new clutches T50 & W58

Posted: Sun Feb 24, 2013 5:24 am
by XNC
Bump! Buy mah stoof!

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Fri Mar 01, 2013 6:49 pm
by XNC
Bump for Weber!!

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Fri Mar 01, 2013 7:32 pm
by turboae92
How much torque does the cc pressure plate holds?

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Fri Mar 01, 2013 8:54 pm
by XNC
This is from the manufacturer:

"Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly, available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up. "



So assuming you have a stock retop (~110ft/lbs) you'd be good up to 275ft/lbs. I think the guy who I bought it from said good to 300HP, but he didn't say torque.

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Sun Mar 03, 2013 1:31 pm
by XNC
Bump! Buy it!

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Sun Mar 03, 2013 3:31 pm
by Musink
Where are you located

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Sun Mar 03, 2013 4:17 pm
by XNC
Vancouver, WA

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Posted: Tue Mar 05, 2013 3:02 pm
by XNC
Bump. Really, no interest? Not even any offers!

Come on guys, I need this stuff gone!

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Posted: Sat Apr 06, 2013 8:13 am
by XNC
4ac (stock) carb and weekend bump! This weekend 25% off list price! 4/5 - 4/7

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Posted: Sat Apr 06, 2013 5:23 pm
by carbd7age
Man that Holset is a beast. Can you send me more pics of it? I want to eventually build a stupid turbo Tacoma engine, and that would do it right there.

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Posted: Sun Apr 07, 2013 8:43 am
by xboxgt12
Please post pictures of the door panels from different angles. Is it four pieces, door and back panels? Thanks!

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Posted: Thu Apr 11, 2013 6:44 pm
by XNC
xbox, unfortunately it is only the front door panels. I'll upload some pictures later this evening

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Posted: Sat Jun 29, 2013 12:49 pm
by XNC
DOOR CARDS & GARRET SOLD!!


Thank you Kris & Joey!!