Page 1 of 1

Reman 4AGE head with some MILD port work - $595

Posted: Wed Apr 05, 2017 2:01 pm
by oldeskewltoy
Image
Image
Image

I have a complete professionally rebuilt largeport 4AGE head that comes with some MILD port work. Head comes with new viton rubber valve seals, 3 angle valve job, and resurfaced. This head is bolt on ready!

more photos here - https://portland.craigslist.org/mlt/pts/6075737627.html


I will ship at your expense.

Re: Reman 4AGE head with some MILD port work - $595

Posted: Wed Apr 05, 2017 8:30 pm
by mad_86
Looks good!!!!

Re: Reman 4AGE head with some MILD port work - $595

Posted: Thu Apr 06, 2017 9:35 am
by toycort
New valves? New guides? what are the lifter to head clearances? How much lift will the valve train handle?

Re: Reman 4AGE head with some MILD port work - $595

Posted: Thu Apr 06, 2017 12:40 pm
by oldeskewltoy
toycort wrote:New valves? New guides? what are the lifter to head clearances? How much lift will the valve train handle?


Image

Original valves, they were re-ground - intake valve margins all @ .70+ mm, exhaust valve margins all @ 1.0+mm.
Original valve guides - all within FSM specifications.

The head uses stock valve springs and will handle upto 8mm of VALVE lift (bit less then cam lift).

The lifter/head clearance averages between .02mm, and .04mm

Re: Reman 4AGE head with some MILD port work - $595

Posted: Fri Apr 07, 2017 1:41 pm
by toycort
Have you cc'd the chambers?

Re: Reman 4AGE head with some MILD port work - $595

Posted: Sun Apr 09, 2017 9:00 am
by toycort
how much to ship to 90631?

Re: Reman 4AGE head with some MILD port work - $595

Posted: Sun Apr 09, 2017 6:48 pm
by oldeskewltoy
I have not CC'd chambers, the head was standard before I got it (measured 116mm thick), and I had it machined .002".

Shipping to your postal code will be $66.00 without extra insurance. Shipping with insurance and the cost will be $76.00

Email me oldeskewltoy@yahoo.com and we can finalize the sale

Re: Reman 4AGE head with some MILD port work - $595

Posted: Mon Apr 10, 2017 12:03 pm
by oldeskewltoy
This head is SOLD