20v distributor blanking cover

Anything about cars, as long as it's clean...
No offensive language, no profanity, no nudity, nothing that your mom will slap you for...
Be nice to others.
S_p_R_i_T_e
Club4AG Regular
Posts: 43
Joined: Mon Jan 14, 2013 9:40 pm

20v distributor blanking cover

Postby S_p_R_i_T_e » Wed Jan 13, 2016 12:14 pm

are there any one/place stateside that make these covers. this would be the cover that blocks the opening where distributor goes if one would like to go distributorless. would like to purchase one. thank you

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


strmrdr23
Club4AG Enthusiast
Posts: 95
Joined: Thu Jan 10, 2013 8:11 pm

Re: 20v distributor blanking cover

Postby strmrdr23 » Thu Jan 14, 2016 10:30 am

S_p_R_i_T_e wrote:are there any one/place stateside that make these covers. this would be the cover that blocks the opening where distributor goes if one would like to go distributorless. would like to purchase one. thank you


i know you said in the US but i think this guy ships here - http://www.sq-engineering.com/upgrade-p ... cover.html AUD exchange rate is heavily favorable for us currently too. might be worth it to ship.

User avatar
RuizXIII
Club4AG Enthusiast
Posts: 172
Joined: Wed Jan 16, 2013 7:33 pm
Location: Smell Ya Later, NJ

Re: 20v distributor blanking cover

Postby RuizXIII » Thu Jan 14, 2016 2:29 pm

I am pretty sure you can get all the SQ Engineering parts through Battle Garage now.
All of the SQE stuff looks great and stellar quality!

http://shop.battlegarage-rs.com/collect ... ing-x-bgrs
irony.cc

S_p_R_i_T_e
Club4AG Regular
Posts: 43
Joined: Mon Jan 14, 2013 9:40 pm

Re: 20v distributor blanking cover

Postby S_p_R_i_T_e » Fri Jan 15, 2016 3:48 pm

Thanks. May be getting it from Australia. Much obliged

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: 20v distributor blanking cover

Postby yoshimitsuspeed » Mon Jan 18, 2016 10:26 pm

I do have a prototype. I was waiting to hear back from a customer to make sure it fit as I didn't have access to my car at the time. Now if I could just remember who that was so I can check in with them lol.

Billy_Andrea
Club4AG Expert
Posts: 417
Joined: Thu Jan 10, 2013 10:08 pm
Location: SF

Re: 20v distributor blanking cover

Postby Billy_Andrea » Mon Jan 18, 2016 10:52 pm

Hasselgren did this for my old 20v.
Image

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: 20v distributor blanking cover

Postby yoshimitsuspeed » Mon Jan 18, 2016 10:59 pm

Billy_Andrea wrote:Hasselgren did this for my old 20v.
Image


I was assuming he just wanted the blanking cap to replace the stock cap but yeah if the op wants to get rid of it altogether I could make what you have there real easy.
Looks real nice.

Billy_Andrea
Club4AG Expert
Posts: 417
Joined: Thu Jan 10, 2013 10:08 pm
Location: SF

Re: 20v distributor blanking cover

Postby Billy_Andrea » Tue Jan 19, 2016 12:55 pm

Ya, looks great & super easy to make.....

S_p_R_i_T_e
Club4AG Regular
Posts: 43
Joined: Mon Jan 14, 2013 9:40 pm

Re: 20v distributor blanking cover

Postby S_p_R_i_T_e » Thu Jan 21, 2016 11:01 am

That looks sweet. Only question with is, with doing cops will there no longer be a need for the distributor and/or acknowledgement from the ecu

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: 20v distributor blanking cover

Postby yoshimitsuspeed » Fri Jan 22, 2016 8:12 am

If you went aftermarket engine management with something like a crank trigger wheel you wouldn't need the dizzy at all. In which case you could remove it and use a plug like Billy_Andrea's. If you are using the stock ECU then you will need the stock dizzy. Or some other setup that perfectly emulated it which would be more trouble than it was worth. To use with the stock ECU and COPs you still need the sensors in the bottom of the dizzy. In which case you need a blanking cover that replaces the cap.

S_p_R_i_T_e
Club4AG Regular
Posts: 43
Joined: Mon Jan 14, 2013 9:40 pm

Re: 20v distributor blanking cover

Postby S_p_R_i_T_e » Fri Jan 22, 2016 7:00 pm

Thanks for the info. Much appreciated

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “Fun Talk”

Who is online

Users browsing this forum: No registered users and 4 guests