Page 1 of 4
My Corolla... Back Again
Posted: Tue May 07, 2013 8:54 pm
by Rue
Re: My Corolla... Back Again
Posted: Tue May 07, 2013 9:25 pm
by Rue
And I forgot... new front lip
Re: My Corolla... Back Again
Posted: Wed May 08, 2013 8:21 pm
by Rue
Re: My Corolla... Back Again
Posted: Thu May 09, 2013 1:51 am
by miswuevos
Dude sweet beams!
and i am assuming those are not frp sideskirts but original expensive ones?
wHAT brakes are you using?
Re: My Corolla... Back Again
Posted: Thu May 09, 2013 7:39 am
by Rue
Yes... oem jdm side skirts. I made FC brake adapters for the front and I'm using celica-supra brakes in the rear with an s13 master cylinder
Re: My Corolla... Back Again
Posted: Thu May 09, 2013 9:02 am
by gazolorean
Glad to have had the opportunity to chat with you and see this thing in real life, super sick car for sure
Re: My Corolla... Back Again
Posted: Thu May 09, 2013 4:57 pm
by kingofkings757
YEA!!! I knew you would finally come around. Glad your back!!!
Re: My Corolla... Back Again
Posted: Thu May 09, 2013 8:44 pm
by Rue
Alright... so for the nay sayer that told me that 50mm rca's wouldn't fit behind a 15" wheel... you were wrong. Tonight I test fit my 60mm rca and everything fit without any unexpected problems. I'll only be able to grease the ball joints with the wheels off and the little lip on the outer edge of the lower control arm makes contact with the rotor only because I have big brakes. I just need to knock off the lip and everything will work fine. Hoping this fixes some of my suspension geometry issues with me spacing the subframe to fit the Beams. I'll be waiting until we make the new lower control arm setup to put the rca's on.
Gazolorean: You're welcome to stop by anytime. If the white corolla is in the driveway it's a sure bet that I'm home. Nice meeting you and your peoples
KingofKings757: I'll kill you!!!!!! LOL! You should be working on your swap
Re: My Corolla... Back Again
Posted: Fri May 10, 2013 12:09 am
by LongGrain
swap looks nice, hopefully i'll be there soon. hoping to get my engine at least mocked up for mounts this weekend.
interesting idea on the huge RCA's, I'm just hoping to be able to get away with minimal subframe spacing with custom solid mounts and a little subframe modification.
peep the build thread if you get a minute.
viewtopic.php?f=7&t=1558
Re: My Corolla... Back Again
Posted: Fri May 10, 2013 7:50 am
by Rue
Assassin10000 got away with no subframe spacing and just making his own mount brackets so it's possible
Re: My Corolla... Back Again
Posted: Sat May 11, 2013 9:13 am
by Rue
Re: My Corolla... Back Again
Posted: Sat May 11, 2013 8:32 pm
by marley4us
rue- long time man!!! such a bad ass build, and custom work! To bad we lost your old thread and everyone else s too
but man your car is going to be crazy!
Re: My Corolla... Back Again
Posted: Wed May 15, 2013 8:23 pm
by Rue
Re: My Corolla... Back Again
Posted: Fri May 17, 2013 9:41 am
by JDMwhiteboy
Always loved this car, even for a panda.
Fix my harness for me! I'll give you cookies?
Re: My Corolla... Back Again
Posted: Fri May 17, 2013 12:56 pm
by Rue
I'm gonna call you but I take payment in the form of Shiner Boch... ask McKenney.
I'll clean up your wiring but it means you have to drive to my house
Re: My Corolla... Back Again
Posted: Thu May 23, 2013 2:23 pm
by JOshua a
What's your fuel pressure set to?
Re: My Corolla... Back Again
Posted: Tue May 28, 2013 9:58 am
by Rue
Fuel pressure is at 42psi with 440cc 7mgte injectors
Re: My Corolla... Back Again
Posted: Tue May 28, 2013 11:38 am
by Rue
Zenki lip installed this weekend
Re: My Corolla... Back Again
Posted: Tue May 28, 2013 11:00 pm
by John H.
Re: My Corolla... Back Again
Posted: Wed May 29, 2013 2:20 pm
by marley4us
hey its Ian!! man your lip looks great! It was good catching up with ya! I need to call ya and ask a question about those RCA's u had made,
TTYS
Re: My Corolla... Back Again
Posted: Thu May 30, 2013 10:03 am
by Rue
That I had made??? I'm too cheap for that. I made them myself.
Re: My Corolla... Back Again
Posted: Thu May 30, 2013 3:45 pm
by marley4us
that's what I meant! lol my english has gone to crap lol!!! that you had made yourself!
Re: My Corolla... Back Again
Posted: Fri May 31, 2013 3:49 pm
by grappletech
Looks good Aaron. I can't wait to get back to start on mine.
Re: My Corolla... Back Again
Posted: Fri May 31, 2013 7:21 pm
by Rue
Rumor has it that you're going to do a Beams swap... care to comment?
Re: My Corolla... Back Again
Posted: Fri May 31, 2013 9:03 pm
by grappletech
Yea, I have the Motor and tranny at the house. My rough draft is since i have motor, tranny, extra kouki harness, spare crossmember, and a few other things. I plan to drop my 16v and have a close to turn-key drop in beams .
Unfortunately I have to go to Afghanistan so my project wont start until I return.
Re: My Corolla... Back Again
Posted: Wed Jun 12, 2013 4:34 pm
by Rue
Re: My Corolla... Back Again
Posted: Fri Jun 21, 2013 4:31 pm
by Rue
There are a few different part numbers for the 7.5" carrier bearings. Here's the part number for the ones that work with the Kaaz diff...
I received a ton of help to get this part made. It's the last part I needed to complete the jig for the celica-supra rear end conversion.
Again... I made this fixture to match the probably 20 year old 6.7" fixture Marty at AutoComp Race Cars has. Almost finished and then we can get to building the rear ends for my car as well as Will Parson's corolla. Marty is the one who did the cage work on Will's car and is working on improving his (and my) suspension.
Aurora spherical rod ends for the lower control arms...
LCA pieces...
Marty is insisting on corner balancing my car. This means something needs to be adjustable soooooooooooo
Re: My Corolla... Back Again
Posted: Wed Jun 26, 2013 5:08 pm
by Rue
Re: My Corolla... Back Again
Posted: Thu Jun 27, 2013 3:09 pm
by Garage7RP
What adjustment range are you trying to achieve on your LCAs?
Re: My Corolla... Back Again
Posted: Thu Jun 27, 2013 9:01 pm
by Rue
Threaded all the way in they are the same length as stock. I'm going to increase track width by 10mm per side. I'm swapping out my NCRCA's with the 60mm RCA's I machined so I will be losing 15mm per side on track width.