Hey Club,
Corolla GTS 1986
I have extended lug studs from the front wheel assembly I got from my parts car.
Can i use them on my rear? Plan on using a slim, slip on spacer.
lugs are a good 1" longer than stock. Will probably use 25mm spacers.
Thanks
Are Wheel Studs same front and back? Ae86
Re: Are Wheel Studs same front and back? Ae86
Here is some information on the OEM studs from my AE86 (JDM spec)...
Measurements are from under the head.
All of these studs have the 14.17-14.20 knurl and will happily pull into
AE86 hubs without raising a sweat. So if your long studs pulled into
front hubs, they should work on the rear hubs.
Cheers... jondee86
Measurements are from under the head.
All of these studs have the 14.17-14.20 knurl and will happily pull into
AE86 hubs without raising a sweat. So if your long studs pulled into
front hubs, they should work on the rear hubs.
Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
Re: Are Wheel Studs same front and back? Ae86
Thank you sir!