I know it's the fuel injector resistor but what car is it from? It was in my box o' parts. I ask because it has 2 plugs on it....not the typical 1 plugger. Thanks.

Here's another part in the bin...looks like some kind of a crank or timing sensor.....might be from a 20v as it was with the other 20v parts....any ideas?

1st one is a resistor box for the 16v 4age largeport AE86. Not sure what the second one is. Dont have that part on my BT 20v.

Jeonsah wrote:1st one is a resistor box for the 16v 4age largeport AE86. Not sure what the second one is. Dont have that part on my BT 20v.

Thanks for reply....but why does it have 2 plugs? All the ones i've seen including one on my car has only 1 plug.

the 2 plugs could be from something like a v6 or v8? the 2nd looks like a sensor from a 1zz or something, cam angle sensor though for sure. do you have p/n's on anything?

morgan wrote:the 2 plugs could be from something like a v6 or v8? the 2nd looks like a sensor from a 1zz or something, cam angle sensor though for sure. do you have p/n's on anything?

Thanks for the help......no part numbers on anything...maybe if i cleaned the fi resistor box it might reveal a part number but the sensor does not have a part number. Thanks.

Google says this....

Toyota HiLux Pickup Truck 4Runner 22RE INJECTOR RESISTOR ballast EFI 28515-28030

Cheers... jondee86

jondee86 wrote:Google says this....

Toyota HiLux Pickup Truck 4Runner 22RE INJECTOR RESISTOR ballast EFI 28515-28030

Cheers... jondee86

Oh nice! And a part number to boot. Thanks....now for the sensor.

The sensor looks like a cam or crank sensor from a1uzfe.

Leaning towards crank sensor though. Seems i remember it due to it being held in by 1 10mm bolt.

4agshoob wrote:Leaning towards crank sensor though. Seems i remember it due to it being held in by 1 10mm bolt.

Yeah I was thinking it was a crank sensor but didnt know from what engine...1uz you say? Thank you very much for the info.