MR2 7 ribs block for ae86
MR2 7 ribs block for ae86
Hi, does a bare MR2 7 rbis block fits with the accessories from an ae86 gts? thanks
Re: MR2 7 ribs block for ae86
The MR-2 block should swap right over into a GTS, assuming that you have the old RWD engine to change out the water pump, pulleys, manifolds, and flywheel, etc,etc. The only problem I've heard of is that some of the engine block bosses, i.e. engine mounts, where not tape out on the MR-2 blocks. In my case, everything was a direct transfer. DaveW
Re: MR2 7 ribs block for ae86
davew7 wrote:The MR-2 block should swap right over into a GTS, assuming that you have the old RWD engine to change out the water pump, pulleys, manifolds, and flywheel, etc,etc. The only problem I've heard of is that some of the engine block bosses, i.e. engine mounts, where not tape out on the MR-2 blocks. In my case, everything was a direct transfer. DaveW
what year is your mr2 block? i do have everything from a 86 gts, thanks
Re: MR2 7 ribs block for ae86
It's a 1987 block. DaveW
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: MR2 7 ribs block for ae86
Definitely will work. I have everything 16v bolted onto a bt20v (4th gen 4age)
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/