https://sfbay.craigslist.org/eby/pts/5996689904.html
Suspension parts below are for X7 Cressida but will fit other Toyotas too: Celica, other Cressidas, Supra, etc.
PAIR (2) Work meister S1 15x9 -15 4x114 - SOLD
PAIR (2) Falken Azenis 205/50/15 BRAND NEWSOLD
PAIR (2) Appliance Mesh 14x7 unknown offset $150 SOLD
BC Coilovers for mx73 Cressida (no rear shocks) - $450 SOLD
T3 NRCA for mx73 Cressida - $100
T3 angle knuckles for mx73 Cressida - $100 SOLD
mx63 LONG lca for mx73 Cressida w/ newish balljoints (These are 365mm long, 65mm longer than AE86 lca, and about 50mm longer than stock mx73 lca - $75 SOLD
AE86 T3 quad caliper bracket - w/ one pair S13 calipers $275 SOLD
AE86 gt-s front seats (black and very clean) $350 SOLD
AE86 JDM steering wheel (very clean) $200 SOLD
AE86 Air Conditioning Complete SOLD
AE86 P/S pump/lines etc. (Make offer)
AE86 SR5 drum rear end complete (Make offer)
1JZ-GTE non-vvti ECU (may have bad capacitors) $40
1JZ-GTE igniter $50 each
326 power wing SOLD
PBM hydro with Wilwood dual caliper reservoir $120
Custom Stainless steel lines for hydro (run from hydro back to brakes with T) $50 (cost me $180)
Autometer 5" tachometer $50
In search of:
AE86: Aftermarket Sway Bars, Manual rack
20170209_185746 by roushman90, on Flickr
20170209_185150 by roushman90, on Flickr
20170209_185139 by roushman90, on Flickr
20170209_185128 by roushman90, on Flickr
20170209_185113 by roushman90, on Flickr
20170209_185104 by roushman90, on Flickr
20170209_184522 by roushman90, on Flickr
20170209_184502 (1) by roushman90, on Flickr
20170209_184442 by roushman90, on Flickr
20170209_184424 by roushman90, on Flickr
20170209_184348 by roushman90, on Flickr
Partout (AE86/Cressida) Updated 2/9/17
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Wed Jan 09, 2013 8:55 pm
Partout (AE86/Cressida) Updated 2/9/17
Last edited by GreenLantern on Tue Mar 21, 2017 9:08 am, edited 9 times in total.
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Wed Jan 09, 2013 8:55 pm
Re: 1JZ Corona partout (Some ae86/cressida/etc)
Bump, pbm hydro dual caliper and stainless lines still available along with 326 power wing, Autometer 5" tachometer
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Wed Jan 09, 2013 8:55 pm
Re: 1JZ Corona partout (Some ae86/cressida/etc)
Bump, need this stuff gone to fund new build! =)
Re: Cressida & Ae86 partout (Some ae86/cressida/etc)
Want to part with the supra axle shafts ?
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Wed Jan 09, 2013 8:55 pm
Re: Cressida & Ae86 partout (Some ae86/cressida/etc)
sterae86 wrote:Want to part with the supra axle shafts ?
Rear end is pending trade, mainly interested in swapping for a 6.7" gt-s complete housing w/ LSD which would be about equal in value to my rebuilt condition 7.5".
If the trade falls through, and no one else is willing to swap for it, then I will sell the entire thing outright.
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Wed Jan 09, 2013 8:55 pm
Re: Partout (AE86/Cressida) Updated 2/9/17
Photos of gt-s seats and jdm wheel added, see bottom of original post for stuff I will trade for!
Re: Partout (AE86/Cressida) Updated 2/9/17
Intereated in custom hydro rear brake line.
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Wed Jan 09, 2013 8:55 pm
Re: Partout (AE86/Cressida) Updated 2/9/17
4agshoob wrote:Intereated in custom hydro rear brake line.
Text me at 510-566-5296. I can send some photos. Will make a deaaal for the lines WITH the PBM hydro assembly!