Reman 4AGE head with some MILD port work - $595
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Reman 4AGE head with some MILD port work - $595
I have a complete professionally rebuilt largeport 4AGE head that comes with some MILD port work. Head comes with new viton rubber valve seals, 3 angle valve job, and resurfaced. This head is bolt on ready!
more photos here - https://portland.craigslist.org/mlt/pts/6075737627.html
I will ship at your expense.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Reman 4AGE head with some MILD port work - $595
Looks good!!!!
Re: Reman 4AGE head with some MILD port work - $595
New valves? New guides? what are the lifter to head clearances? How much lift will the valve train handle?
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Reman 4AGE head with some MILD port work - $595
toycort wrote:New valves? New guides? what are the lifter to head clearances? How much lift will the valve train handle?
Original valves, they were re-ground - intake valve margins all @ .70+ mm, exhaust valve margins all @ 1.0+mm.
Original valve guides - all within FSM specifications.
The head uses stock valve springs and will handle upto 8mm of VALVE lift (bit less then cam lift).
The lifter/head clearance averages between .02mm, and .04mm
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Reman 4AGE head with some MILD port work - $595
Have you cc'd the chambers?
Re: Reman 4AGE head with some MILD port work - $595
how much to ship to 90631?
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Reman 4AGE head with some MILD port work - $595
I have not CC'd chambers, the head was standard before I got it (measured 116mm thick), and I had it machined .002".
Shipping to your postal code will be $66.00 without extra insurance. Shipping with insurance and the cost will be $76.00
Email me oldeskewltoy@yahoo.com and we can finalize the sale
Shipping to your postal code will be $66.00 without extra insurance. Shipping with insurance and the cost will be $76.00
Email me oldeskewltoy@yahoo.com and we can finalize the sale
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Reman 4AGE head with some MILD port work - $595
This head is SOLD
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!