FS: Weber 40, clutches & turbos! (Prices reduced)

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

FS: Weber 40, clutches & turbos! (Prices reduced)

Postby XNC » Fri Feb 22, 2013 5:23 am

So I've got some stuff kicking around my garage I would love to get rid of. All prices are OBO not including shipping. NRCAs have been sold!

Right now I would prefer to sell, but I would be interested in trading for two things:
  • A lightweight 6-bolt (4afe/7afe) flywheel ala Toda, Aasco, etc
  • A 212mm W58 splined clutch puck/disc

On to the parts! All are BRAND NEW unless otherwise noted. (prices at bottom)
Image

Clockwise from the left:
  • SPEC 212mm 6 puck solid disc, T50 spline puck. I believe it's Stage 2
  • 200mm Competition Clutch brand Stage 2 pressure plate
  • 200mm Competition Clutch Stage 2, 6 puck solid disc. W58 Spline
  • 200mm stock NAPA replacement T50 spline disc


Weber 40/40 carb. I picked up from HR member. Worked amazingly on my 4ac, but only thing that drove me mad was no choke. Had to revv it up a few times when first start on cold mornings, but got me a consistent 24-28mpg. Comes with 4ac adapter plate & redline filter/clamps. (Will be cleaned before shipped)

Carb is still on engine, so if you need more angles, light, etc. just let me know.
Image

Image

Image

Seeing if there is any interest in some turbo junk. Got a CX Racing manifold that I had ceramicoated and a Garrett A/R .80 turbo. Spins freely, comes with some oil lines. Bought from an SR20 owner who was upgrading to a bigger 'bo. That MONSTROSITY of a trubo is a Holset 351VE (variable vane turbo) that I bought a few years ago when I was thinking about a stupidly large turbo build. It needs a cleaning but otherwise works fine.

Image
Image


========PRICES=========
  1. Spec disc $100
  2. CC pressure plate $100
  3. CC disc $75
  4. NAPA disc $20
  5. NRCAS SOLD!
  6. 4ac carb SOLD!
  7. Door panels SOLD!
  8. Weber 40/40 Carb (W/4ac adapter & filter) 175$
  9. Garrett SOLD!
  10. Holset 100$
  11. Manifold 200$

If the CC plate & flywheel are bought together, I will knock price to 150.
If Garrett & Manifold are bought together, I'll knock to 300$

Can also contact via phone/text: 360.Nine oh Nine. Five Oh Two Six.
Last edited by XNC on Sat Jun 29, 2013 12:49 pm, edited 5 times in total.

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Brand new clutches T50 & W58

Postby XNC » Sun Feb 24, 2013 5:24 am

Bump! Buy mah stoof!

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby XNC » Fri Mar 01, 2013 6:49 pm

Bump for Weber!!

turboae92
Club4AG Enthusiast
Posts: 93
Joined: Tue Feb 19, 2013 4:17 pm
Location: miami fl

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby turboae92 » Fri Mar 01, 2013 7:32 pm

How much torque does the cc pressure plate holds?

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby XNC » Fri Mar 01, 2013 8:54 pm

This is from the manufacturer:

"Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly, available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up. "



So assuming you have a stock retop (~110ft/lbs) you'd be good up to 275ft/lbs. I think the guy who I bought it from said good to 300HP, but he didn't say torque.

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby XNC » Sun Mar 03, 2013 1:31 pm

Bump! Buy it!

Musink
Club4AG Enthusiast
Posts: 68
Joined: Wed Jan 23, 2013 8:24 am
Location: Banning, CA

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby Musink » Sun Mar 03, 2013 3:31 pm

Where are you located
1986 Sr5>Gtsr5(Soon) Hatch DD.....:D

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby XNC » Sun Mar 03, 2013 4:17 pm

Vancouver, WA

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Brand new clutches T50 & W58 Now with Weber 40/40!

Postby XNC » Tue Mar 05, 2013 3:02 pm

Bump. Really, no interest? Not even any offers!

Come on guys, I need this stuff gone!

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Postby XNC » Sat Apr 06, 2013 8:13 am

4ac (stock) carb and weekend bump! This weekend 25% off list price! 4/5 - 4/7

User avatar
carbd7age
Club4AG Pro
Posts: 803
Joined: Sat Jan 12, 2013 5:56 am
Location: Chattanooga, TN

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Postby carbd7age » Sat Apr 06, 2013 5:23 pm

Man that Holset is a beast. Can you send me more pics of it? I want to eventually build a stupid turbo Tacoma engine, and that would do it right there.
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001

xboxgt12
Club4AG Regular
Posts: 26
Joined: Sun Apr 07, 2013 8:39 am

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Postby xboxgt12 » Sun Apr 07, 2013 8:43 am

Please post pictures of the door panels from different angles. Is it four pieces, door and back panels? Thanks!

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Postby XNC » Thu Apr 11, 2013 6:44 pm

xbox, unfortunately it is only the front door panels. I'll upload some pictures later this evening

XNC
Club4AG Regular
Posts: 15
Joined: Mon Jan 14, 2013 10:45 pm

Re: FS: Weber 40, clutches & turbos! (Prices reduced)

Postby XNC » Sat Jun 29, 2013 12:49 pm

DOOR CARDS & GARRET SOLD!!


Thank you Kris & Joey!!