notnilc20's 1986 ae86 Hatch build/restoration
Re: notnilc20's 1986 ae86 Hatch build/restoration
Removal of the hatch glass and more...plus finally get some base and clear coat down.
https://youtu.be/s8hNBp0HmII
https://youtu.be/s8hNBp0HmII
Re: notnilc20's 1986 ae86 Hatch build/restoration
Join me as i finish painting the 86 and put some of it back together....but not without it's difficulties. Also, special thank you to a subscriber....watch and see.
https://youtu.be/gBbxsr8bXvQ
https://youtu.be/gBbxsr8bXvQ
Re: notnilc20's 1986 ae86 Hatch build/restoration
Ep.34 Reassembly......but not soooo fast. Reassembly may seem like a breeze, but remember this is a resto-mod project so all the old nasty parts need to be restored before being put back on this fresh newly painted machine. Thanks for your patience.
https://youtu.be/ejc6ddYriPA
https://youtu.be/ejc6ddYriPA
Re: notnilc20's 1986 ae86 Hatch build/restoration
I restore these old tired tail lights back to new condition. Plus hatch glass, tail light, and headlight install.
https://youtu.be/1980WDaBNgs
https://youtu.be/1980WDaBNgs
Re: notnilc20's 1986 ae86 Hatch build/restoration
Ep36...Finishing up the exterior bits and starting on the interior!!!
This ae86 project takes another step forward. Also I clean up the exterior door handle and add some thermo-coustic barrier to the floor of the 86.
https://youtu.be/eb7cXkRNNmU
This ae86 project takes another step forward. Also I clean up the exterior door handle and add some thermo-coustic barrier to the floor of the 86.
https://youtu.be/eb7cXkRNNmU
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: notnilc20's 1986 ae86 Hatch build/restoration
Woa dude, you're younger than I thought! haha.
Good videos man, I haven't seen many but I like the detail. Many 86 channels on youtube are just horribly drift bucket oriented and really annoying to watch.
Good videos man, I haven't seen many but I like the detail. Many 86 channels on youtube are just horribly drift bucket oriented and really annoying to watch.
Success guardian... Successsssssss..
Re: notnilc20's 1986 ae86 Hatch build/restoration
CloudStrife wrote:Woa dude, you're younger than I thought! haha.
Good videos man, I haven't seen many but I like the detail. Many 86 channels on youtube are just horribly drift bucket oriented and really annoying to watch.
What? You mean you haven't subscribed yet? Haha......it's all good. With my channel i'm trying to actually show the work as I go rather than just making videos of showing what has already been done....very challenging i must say as you can't show everything...anyway, glad you checked it out.....thanks.
Re: notnilc20's 1986 ae86 Hatch build/restoration
Build is coming along great man, good work.
Re: notnilc20's 1986 ae86 Hatch build/restoration
shagymc wrote:Build is coming along great man, good work.
Thank you sir! I actually see a light at the end of the tunnel.
Re: notnilc20's 1986 ae86 Hatch build/restoration
Finally start the interior install! Also I discuss what's coming up in the future for my suspension. Here's the vid
https://youtu.be/9i7w43XNnC4
https://youtu.be/9i7w43XNnC4
Re: notnilc20's 1986 ae86 Hatch build/restoration
looks like you will have your hands busy for a while lol Suspension work is a lot more fun than interior work for sure. I went the easy route and just left everything gutted and used the T3 panels.
Re: notnilc20's 1986 ae86 Hatch build/restoration
It's starting to look like a car....nothing brings it together like getting the interior installed. This episode I take another step forward to getting this ae86 on the road again. Check out the video.
https://youtu.be/dyvaPqN0ZCE
https://youtu.be/dyvaPqN0ZCE
Re: notnilc20's 1986 ae86 Hatch build/restoration
After a few more touch ups. (T3 shifter rebuild kit, painting seats, etc) I decided it was time to take this ae86 out on public roads....but not everything goes as planned...
https://youtu.be/Ww1ICevVXiU
https://youtu.be/Ww1ICevVXiU
Re: notnilc20's 1986 ae86 Hatch build/restoration
Link to video: https://youtu.be/yQ9SvIP85ks
In my previous episode I left with a bad taste in my mouth as my diff was making a loud whining and my rear brakes were dragging me down....here I take 2 steps back in order to take a step forward. I rebuild the differential and add a rear brake adjustable proportioning valve.....but will I be able to redeem myself and have a proper test drive?
In my previous episode I left with a bad taste in my mouth as my diff was making a loud whining and my rear brakes were dragging me down....here I take 2 steps back in order to take a step forward. I rebuild the differential and add a rear brake adjustable proportioning valve.....but will I be able to redeem myself and have a proper test drive?
Re: notnilc20's 1986 ae86 Hatch build/restoration
Great video man! I loved seeing the backlash measurements with the micrometer. I've never made it that far with mine but I feel like it might be coming up and I feel pretty confident I can handle that tedious work. Might need a few beers to keep the patience going but still doable! Keep crushing it!
Re: notnilc20's 1986 ae86 Hatch build/restoration
shagymc wrote:Great video man! I loved seeing the backlash measurements with the micrometer. I've never made it that far with mine but I feel like it might be coming up and I feel pretty confident I can handle that tedious work. Might need a few beers to keep the patience going but still doable! Keep crushing it!
Hey thanks man! Trust me if I can do it...you can do it. Yes, Beers always help lessen the stress level.....
Re: notnilc20's 1986 ae86 Hatch build/restoration
Short stroke conversion video. Tell me whatcha think? Hope you enjoy.
https://youtu.be/gFGSgNFI-cQ
https://youtu.be/gFGSgNFI-cQ
Re: notnilc20's 1986 ae86 Hatch build/restoration
I refresh the hubs with new bearings and revamp the brakes. Then i finally install the coilover suspension i assembled from the previous episode. Then of course the all important test drive. Enjoy the vid.
https://youtu.be/DqfRTxl5470
https://youtu.be/DqfRTxl5470
Re: notnilc20's 1986 ae86 Hatch build/restoration
Sorry it's been sooo long since my last video...I reveal what has been taking up all my time. Then I Fix the fuel level sender and refurbish a battery tie down bracket. Mock up the front and rear bumper covers.
Also, Gotta backtrack yet again and fix this exhaust and get this car straight so i can finally start the bodykit install.
https://youtu.be/KxAGLhgHYxs
Also, Gotta backtrack yet again and fix this exhaust and get this car straight so i can finally start the bodykit install.
https://youtu.be/KxAGLhgHYxs
Re: notnilc20's 1986 ae86 Hatch build/restoration
looking and sounding good man, I love your paint job. Where did you get the body kit from? The fitment shouldn't be that far off I would think.
Re: notnilc20's 1986 ae86 Hatch build/restoration
aukword1 wrote:looking and sounding good man, I love your paint job. Where did you get the body kit from? The fitment shouldn't be that far off I would think.
Thanks man....here's a link to the body kit...it's just a cheap jblood knock off....wonder if they mistakenly sent me like a wide body rear bumper??? Oh well, I've already started fixing it and that'll be in the next vid.
https://carbonfiberhoods.com/vsaero-frp ... 05573.html
Re: notnilc20's 1986 ae86 Hatch build/restoration
In this first of a few episodes I begin installing the rear bumper on the 86. Cutting and reglassing, Fabricating brackets, and bumper supports to get it to fit properly....what more could you want??
Enjoy...
https://youtu.be/30MgX27zyP4
Enjoy...
https://youtu.be/30MgX27zyP4
Re: notnilc20's 1986 ae86 Hatch build/restoration
Solid work man, when I work with fiberglass, to me it is easier to saturate the matt first then lay it. I find I get less bubbles that way. It does make a huge mess though on large sheets like you were using. I was digging the side brackets too. I think they'll look great once they're painted. I will always take functionality over cosmetics on pieces like this since no one will really see them. If you are that worried about it, sand em dowm a bit with a DA then get them painted or powder coated!
Cheers!
Cheers!
Re: notnilc20's 1986 ae86 Hatch build/restoration
shagymc wrote:Solid work man, when I work with fiberglass, to me it is easier to saturate the matt first then lay it. I find I get less bubbles that way. It does make a huge mess though on large sheets like you were using. I was digging the side brackets too. I think they'll look great once they're painted. I will always take functionality over cosmetics on pieces like this since no one will really see them. If you are that worried about it, sand em dowm a bit with a DA then get them painted or powder coated!
Cheers!
Hey thanks a lot man! The side brackets actually don't look too bad after I painted them black.....but like you said...no one will ever see them. Thanks for watching!
Re: notnilc20's 1986 ae86 Hatch build/restoration
Doing a lil free giveaway for my Subs! Hit 555 subs! It's a Christmas miracle....enter for your chance to win a cool prize ae86 related.
https://youtu.be/y3Wx3d8y-4k
https://youtu.be/y3Wx3d8y-4k
Re: notnilc20's 1986 ae86 Hatch build/restoration
Now that the rear bumper is ready for bodywork, it's time to get the sideskirts installed. But all is not so easy as I have to make several corrections to these skirts to fit right. Thanks for watching.
https://youtu.be/Lo_evzU9Uu0
https://youtu.be/Lo_evzU9Uu0
Re: notnilc20's 1986 ae86 Hatch build/restoration
Fabricating the inner bumper structure and the jblood replica bumper and mounting it to the ae86. Thanks for watching!
https://youtu.be/0nO0GhhbxEc
https://youtu.be/0nO0GhhbxEc
Re: notnilc20's 1986 ae86 Hatch build/restoration
Any update? Miss watching the eps.