Does anyone have the torque specs for the GZE rod bolts/nuts
I heard all the 4AGE/4AGZE torque specs were the same BUT I'd rather be safe than sorry since i don't have a FSM for a 4AGZE engine
any info is much appreciated, thanks!
4AGZE Rod Bolt Torque Specs
- daveskatesallday
- Club4AG Pro
- Posts: 501
- Joined: Thu Jan 10, 2013 10:35 pm
4AGZE Rod Bolt Torque Specs
Voici mon secret. Il est très simple: on ne voit bien qu'avec le cœur. L'essentiel est invisible pour les yeux.
Re: 4AGZE Rod Bolt Torque Specs
I've fasten the bolts yesterday for the 4AGE Blacktop, so i know for sure their values, but i think the 4AGZE are a bit different. Here they come:
Fasten them all @39nm (29 ft-lb). After that fasten them for another 90 degrees. To be sure about the 90 degrees you can mark the nut.
It's all on pages EM-98 and EM-99 of the service manual.
If you have any additional question feel free to ask them here of through pm.
Fasten them all @39nm (29 ft-lb). After that fasten them for another 90 degrees. To be sure about the 90 degrees you can mark the nut.
It's all on pages EM-98 and EM-99 of the service manual.
If you have any additional question feel free to ask them here of through pm.
Check my 4AGE 20V BT teardown, rebuild and transplantation over here --> http://club4ag.com/forums/viewtopic.php?f=7&t=3382
- daveskatesallday
- Club4AG Pro
- Posts: 501
- Joined: Thu Jan 10, 2013 10:35 pm
Re: 4AGZE Rod Bolt Torque Specs
thanks!
Voici mon secret. Il est très simple: on ne voit bien qu'avec le cœur. L'essentiel est invisible pour les yeux.