Can anyone guide me or help me with wiring up the 1uz to my ae86 sr5
I've had the project for a long time and the main thing holding me back is getting it wired up to start.
I've seen several fourms say its easy but no one ever breaks it down,
Im mechanically inclined and want to learn how to do this on my own. I just cant get my hand on how to get the two together any help is greatly appreciated
if anyone can help me with it, it would be a blessing
thank you
1uz ae86 wiring help!
Re: 1uz ae86 wiring help!
Do you have both wiring harnesses and diagrams for both?
-
- Posts: 5
- Joined: Mon Jul 07, 2014 12:14 pm
Re: 1uz ae86 wiring help!
saiGone wrote:Do you have both wiring harnesses and diagrams for both?
yes i have access to all of that
im am a tech at a toyota dealer
Re: 1uz ae86 wiring help!
That a boomer
Re: 1uz ae86 wiring help!
Actually you might need a GTS Harness, since the sr5 is carbed. might not.
-
- Posts: 5
- Joined: Mon Jul 07, 2014 12:14 pm
Re: 1uz ae86 wiring help!
saiGone wrote:Actually you might need a GTS Harness, since the sr5 is carbed. might not.
I'm pretty sure it can be wired up with the sr5 stuff
And even if I had the gts stuff
How would I wiring it up(mate the 2 in to the 1)
I have the motor turning over by key just by jumping the starter with the signal wire
I'm sure once I figure it out...I say "Oh wow why didn't I think of that"
-
- Posts: 5
- Joined: Mon Jul 07, 2014 12:14 pm
Re: 1uz ae86 wiring help!
Just an update still need a lil help I have power to all my sensors and pulse from my
Injector when I turn the motor over
But no spark
If any ideas plz lmk
Thank you
Injector when I turn the motor over
But no spark
If any ideas plz lmk
Thank you
Re: 1uz ae86 wiring help!
kingatrevido wrote:Just an update still need a lil help I have power to all my sensors and pulse from my
Injector when I turn the motor over
But no spark
If any ideas plz lmk
Thank you
Check all engine grounds. Also use a multi-meter on wires going into coil.
-
- Posts: 5
- Joined: Mon Jul 07, 2014 12:14 pm
Re: 1uz ae86 wiring help!
saiGone wrote:kingatrevido wrote:Just an update still need a lil help I have power to all my sensors and pulse from my
Injector when I turn the motor over
But no spark
If any ideas plz lmk
Thank you
Check all engine grounds. Also use a multi-meter on wires going into coil.
I have I'm getting power to the coil and igniter
I hasn't got to check if I'm getting a sign yet tho