AE86 Manual Rack Q&A

User avatar
BakaBaka
Club4AG Enthusiast
Posts: 80
Joined: Thu Jan 10, 2013 10:08 pm

AE86 Manual Rack Q&A

Postby BakaBaka » Tue Aug 27, 2013 12:50 pm

Sorry guys, it's been too long since I dove back into this subject. I know this has been asked again and again countless time befores. I've had these parts sitting in my closet for over 3 years but before I start tackling my power->manual conversion process, I'd like to make sure I have all parts in order.

So a simple confirmation would be greatly appreciated. I'm pretty sure I have all the necessary and required correct parts.. but I digress. So.. the following parts are:

1x AW11 MR2 Manual Steering Rack
2x AE86 Power Steering Outer Tie Rods
2x AE86 Power Steering Inner Tie Rods
1x T3 Adapter Bushing
2x AE86 Power Steering Bracket (both left and right side - RH bracket will fit the T3 Adapter Bushing, while left side needs no mods since they are proven to fit)
1x MKIII Intermediate Shaft
1x AW11 MR2 Steering Shaft U-Joint

And thats the parts I have. Can anyone confirm I'm good to go?

Kudos,
Jay

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


assassin10000
Club4AG Enthusiast
Posts: 131
Joined: Thu Jan 10, 2013 10:07 pm

Re: AE86 Manual Rack Q&A

Postby assassin10000 » Tue Aug 27, 2013 9:33 pm

Good.

If drifting get rack spacers.

Andrew

TheOxyMorin
Club4AG Enthusiast
Posts: 55
Joined: Sat Mar 02, 2013 7:00 pm

Re: AE86 Manual Rack Q&A

Postby TheOxyMorin » Thu Aug 29, 2013 9:41 am

BakaBaka wrote:Sorry guys, it's been too long since I dove back into this subject. I know this has been asked again and again countless time befores. I've had these parts sitting in my closet for over 3 years but before I start tackling my power->manual conversion process, I'd like to make sure I have all parts in order.

So a simple confirmation would be greatly appreciated. I'm pretty sure I have all the necessary and required correct parts.. but I digress. So.. the following parts are:

1x AW11 MR2 Manual Steering Rack
2x AE86 Power Steering Outer Tie Rods
2x AE86 Power Steering Inner Tie Rods
1x T3 Adapter Bushing
2x AE86 Power Steering Bracket (both left and right side - RH bracket will fit the T3 Adapter Bushing, while left side needs no mods since they are proven to fit)
1x MKIII Intermediate Shaft
1x AW11 MR2 Steering Shaft U-Joint

And thats the parts I have. Can anyone confirm I'm good to go?

Kudos,
Jay


You're good mate. Just did mine a few weeks ago.

- Max

User avatar
BakaBaka
Club4AG Enthusiast
Posts: 80
Joined: Thu Jan 10, 2013 10:08 pm

Re: AE86 Manual Rack Q&A

Postby BakaBaka » Sun Sep 01, 2013 12:34 am

^ Thanks guys. Appreciate the thumbs up.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


TheOxyMorin
Club4AG Enthusiast
Posts: 55
Joined: Sat Mar 02, 2013 7:00 pm

Re: AE86 Manual Rack Q&A

Postby TheOxyMorin » Sun Sep 01, 2013 9:43 am

BakaBaka wrote:^ Thanks guys. Appreciate the thumbs up.


If you need any more help let me know. Not on the road yet but steering rack is done.

User avatar
BakaBaka
Club4AG Enthusiast
Posts: 80
Joined: Thu Jan 10, 2013 10:08 pm

Re: AE86 Manual Rack Q&A

Postby BakaBaka » Sun Sep 01, 2013 10:38 am

Matter of fact, I actually do have another manual rack related question. I thought I just ask it separately on a new topic. The link is below.

http://club4ag.com/forums/viewtopic.php?f=9&t=7043

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Corolla AE86”

Who is online

Users browsing this forum: No registered users and 3 guests