Your shifter will actually need some repair in order to work perfectly. The slots in your main shifter ball have been destroyed, because the unit was run so long without any bushings in it.

You will need to get a replacement shift lever, or weld in the missing area in the slots and grind it smooth.

Bumper brackets and turn signals sold.

For Sale, Located in Placerville, CA. Can ship. E-mail me or call 530-672-8600 New pair of Kouki JDM Turnsignals $150 Autometer Z series Gauges. $50 each. Have Boost, Water and Oil Pressure. Kouki Rear JDM Bumper Brackets. New but been around the block enough times to be called used. $140 the pair. ...

I'll have the laser cut first prototypes done for the equal length 4 link boxes in about 5 days. We'll see then if I need to make any adjustments.

The rear Wilwood caliper has a built in E-brake and comes with all necessary cables and such.

Carbd7AGE: I have the AE86 door cards already cut, just waiting on some custom dies to come in so we can put the bends in them that are needed.

Revcyanide, I am already working on the Starlet ones!

This was the set of cams we used in our Formula D car back in the day. TED Components Kamikaze Cams for the Silvertop 20V, 284 duration on intake and exhaust, 8.5mm lift. This is the largest setup I believe you can use with the factory valve springs. Comes with the complete set of buckets and shims,...

I do believe we have engineered the best Fender Braces on the market for the AE86 Corolla! These units are fully triangulated and fully gusseted to eliminate flex. We even gusseted the end brackets at all points to improve stiffness. We have also extended the forward mounting point as far down the c...

Over the last few months we've been working super hard and releasing all kinds of new parts! Check it out! Many of our parts are available in multiple colors not pictured here. Contact us at: Techno Toy Tuning 4211-A Business Dr. Shingle Springs, CA 95682 (530)672-8600 ggtyler@yahoo.com And be sure ...

For those doing a manual rack conversion on the AE86, one of the key components is a MK3 Supra Intermediate Shaft. These have been getting more and more difficult to find in the junkyards, so we decided to make a batch from scratch! Made from solid steel and heat treated for strength, these are a di...

These are experimental pro drifting knuckles only. Not good for street or road racing use. Not suggested for beginner drift. Taka tried a couple sets out and his review said: "Gabe, This is Taka. Thank you for keep making great parts for AE86. Finally I was able to try 0 ackerman knucke. Overal...

Currently upping the trade in value on AE86 and 280ZX strut casings to $150 per pair!

Please note our new shipping address is:

Techno Toy Tuning
4211-A Business Dr.
Shingle Springs, CA 95682

Any questions? Call us at 530-672-8600

Hey guys! We are in need of front strut casings for the following cars: Toyota: All years Classic and Supra from 1971-->1986 AE86 TE27 Corolla TE37 Corolla TE72 Corolla MX73 Cressida MX32 Cressida KP61 Starlet KE30 Corolla KE70 Corolla Nearly any old Toyota RWD car from 1968-->1986 (holler at us if ...

Sorry, I'm sure you didn't mean to do anything illegal, but this is 100% illegal. The law clearly states that raffles are only for charity and can not be advertised or taken through the Internet. It also states that a raffle can't cross state lines. These laws protect people from scams. You are putt...

It doesn't matter if it is a car, or a set of wheels or a box of bolts. It is illegal to raffle off tangible goods, unless the proceeds go to a charity. Each raffle has to be registered.

Is Yamagin corp a charity? Who does it benefit?

Errr, isn't this illegal in California? I thought raffles could only be for charity under California gambling laws?

http://oag.ca.gov/charities/raffles

Injector Plugs for Toyota 16V 4AGE motors. For those switching to carbs or alternate injector placement. Made from 6061 aluminum with precision 0-Ring fit. Price on a set of 4 is $25. Seeing as there are only 5 of you guys that actually need these, we've got a lifetime supply in stock. :) Contact us...

Zero Ackerman Knuckles and Outer Tie rods are now in stock! We have these for both the AE86 85mm strut spacing, and the MA60/MX73 90mm strut spacing configurations. Comes with your choice of length on the outer tie rods, to match your specific setup for $240 the pair! Contact us through our website ...