Hey guys,

Here is an AE86 Drift video I just finished editing

Let me know what you think

http://www.youtube.com/watch?v=cRmwxmPR4w0

For Sale

New Power Steering Rack, Never Used(Doesnt include inner tie rods)
$200 OBO

I've heard conflicting answers regarding this so i'll ask it here, I'm installing prothane bushing into my 4 links When re-installing all the 4 links, is there any special procedure you have to do? I've heard some people mentioning about setting preload and also that the bolts should be snugged up w...

I'm looking for a set of 6kg rear springs to use in my coupes suspension setup(im running coilovers up front). Im looking for 2.5" drop Looking for something like these, dont have to be new https://technotoytuning.com/toyota/ae86 ... 86-corolla If you have them and your looking to sell please l...

I'm looking for a set of 6kg rear springs to use in my coupes suspension setup(im running coilovers up front). Im looking for 2.5" drop Looking for something like these, dont have to be new https://technotoytuning.com/toyota/ae86/swift-japan-6kg-rear-lowering-springs-ae86-corolla If you have th...

Before you mess around with the AFM and such, just run 12v and a good ground to the fuel pump, if it doesnt come on there is no point doing the other tests, until the fuel pump turns on with 12v and a ground, there is no way it will turn on via any other method. The AFM can send a signal to cut off ...

Ground it the same place the stock harness grounds the fuel pump, theres a bolt where a bunch of grounds are along the rear panel(i think near where the liscene plates bolt from inside the hatch. you'll see it clearly, i believe their doubled up white wires. sand sound the bolt and the metal, get a ...

If your giving it 12v and a proper ground and it still doesnt work, then its toast.

If you have a diagnostic port(I think only kouki models had it) you could jump B+ and FP to force on the fuel pump.

I've got a greddy Oil Cooler, it needs -10AN lines and a sandwich plate, I was looking online and i found this
http://www.ojperformance.com/Online%20S ... ctid=17319

Will this thread onto the block of the 20V 4age?