This car is stupid. I hate it.

Wes picked me up a tranny mount from an auto sr5. Sacrificed it to make a template to bring to Joey at Performance Options. http://i10.photobucket.com/albums/a118/smallport4ag/IMG_8039_zps31883844.jpg http://i10.photobucket.com/albums/a118/smallport4ag/IMG_8038_zpsdbbcfb45.jpg ****CENSORED****pictur...

Got my bumper in one piece. Need to smooth out and do a little bit more filling. http://i10.photobucket.com/albums/a118/smallport4ag/gettingthere_zps9ccdd8f7.jpg Some transmission shots for you guys. Tight fit but has space for vibration. http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7921_...

Put in the time at the shop the other day and finished up the prototypes on the lathe. The final design for the pilot bearing extension will be made of steel to avoid the possibility of the bearing "falling out" because of thermal expansion. I checked clearance with my custom ACT clutch di...

Finally started on the drivers side body work... http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7632_zpsa1ff62a4.jpg Made another block off plate and got it welded in http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7634_zps8a2388df.jpg Patience worked out on this side and I didn't w...

Decided to man up and try welding my sidemarkers and rear hatch holes up. Grabbed my "dropvent" hood I had laying in the backyard and cut off some metal http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7595_zps382fa52d.jpg Made a pattern and cut it out http://i10.photobucket.com/alb...

Also I ziptied my bumper together so it wasn't in 6 pieces. http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7510_zps08cc6f52.jpg http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7511_zps0319f3b4.jpg Excited! I'm going to extend the bottom of the origin rear bumper a little bit to matc...

Fiberglassing 101 You'll need supplies and equipment http://i10.photobucket.com/albums/a118/smallport4ag/IMG_7491_zps3971abb4.jpg The most important things to remember while working with fiberglass... Always wear gloves/respirator/eye protection and work in a open environment! That being said you'll...

Some stuff I won on yahoo japan auctions. https://scontent-b-sjc.xx.fbcdn.net/hphotos-prn1/t1/1620398_597401416995023_1916426198_n.jpg https://scontent-b-sjc.xx.fbcdn.net/hphotos-frc1/1618638_597401453661686_1502071365_n.jpg https://scontent-b-sjc.xx.fbcdn.net/hphotos-frc1/t1/1620553_597401456995019...

Sold out on this run. Next run is in April

I designed and started manufacturing t50 to w58 adapter kits.


viewtopic.php?f=9&t=10414

***KITS ARE NOT READY FOR SALE BUT WILL BE SOON!*** Over the past couple of months I've been ironing out kinks in a adapter plate I designed to run a w58 or w series transmission with the t-series bell housing. Similar to the one Andrew Gandre (assassin10000) milled for himself years ago and comes w...

Sorry garage photos are lame. Here is how they look at night. The drivers side tail light had a wire reversed between the running and brake its been fixed since.

bump. Last try or I'm keeping them!

bump! I see sprinters in the same condition going for $350! These already have the conversion!

So first thing before I could fill my rear arches was welding up the seam that ripped and the cracked fender from dolly and hammering it too much. My buddy let me borrow his harbor freight special (non gas mig) welder. Excuse my welds, first time welding and I burned through initially! http://i10.ph...

FS or FT for redlines: zenki sprinter tails converted to LED. They are near mint condition and were purchased new in 2008. However, there is a scuff on drivers side directional from a careless parallel parker that I'm sure could be wet sanded out (no cracks in any lenses). The tail lights were conve...

I have a set of sprinters that Mike Yee of solo8 converted to LED. I'll get some pictures when I get a chance next week.

I decided on removing the door decals/molding since I decided on changing the look of my car. Heres the easier way of doing so.. Removing decals, pin stripping, quarter panel chip protector, and molding adhesive is a pain without the correct tools. Using a razor blade or your thumb is hard work/stup...

trade for anal?

we should drive together someday maybe. Come out to USAIR and ride the roller coaster of love. and damn you for finding a supra axle. I need to go junk yarding when it gets warm again. Yeah man! I may go hang out at club fr since a bunch of my friends are going. Also why not run a toaster toyota va...

So I sold my autopower roll bar. It was good for what I used it for but extremely heavy and had a large roof gap. Chris from Car N Bike Moto is going to help me make a 6 point with door bars. Thats after this whole transmission deal... Look how much space there is for activities! http://distilleryim...

Driveshaft and t50 SOLD

bumper looks like a ps duce, not garage bb.

Cool car. Hit it with a buffing pad to bring some of that original shine back!

As the title states. If you have just the rears or a full set please email me with your asking price and shipping to 94503. Thanks

smallport4ag@gmail.com

Awesome

bump!

Awesome car and quality work. If I had the money this would be mine. glws.

Hey guys doing a w58 in my car so this stuff has to go. I have a t50 out of my car for sale. Does not come with a bellhousing. Shifts well, has a hard time downshifting to second when cold. Also I've noticed that it also leaks oil out of the input shaft. GIVEN AWAY I also have a custom two piece dri...