Search found 126 matches

by UNLIMITED 86
Sun Jul 21, 2019 4:25 am
Forum: TECH: 4A-GE ENGINE
Topic: Axle won’t fit with OEM LSD?
Replies: 3
Views: 136

Re: Axle won’t fit with OEM LSD?

Hopefully you didnt damage diff or bend the axles.

The splines on the Kouki LSD axles are longer than the non-LSD axles. Its in the archive tech section.

Talk to a machine shop. Make sure they are still straight and ask them to increase the spline depth for you...
by UNLIMITED 86
Sun Jul 21, 2019 4:09 am
Forum: TECH: 4A-GE ENGINE
Topic: ITB's, Coilpack, Haltech ECU installation for 16v
Replies: 13
Views: 654

Re: ITB's, Coilpack, Haltech ECU installation for 16v

Post pics of your distributor ;)

aukword1 wrote:With ITB's you wont get very stable MAP sensor readings. Most tuners will tune it based off of your throttle position.


Do yours run off MAP or TP?
by UNLIMITED 86
Tue Jul 09, 2019 9:08 am
Forum: Want to BUY (seeking sellers)
Topic: WTB: everything interior
Replies: 4
Views: 192

Re: WTB: everything interior

hey, I have a coupe. I would def shell out the money if I can find a black dash uncracked. Thanks, this might sound stupid but how do i clean the wiper, with what kinda fluids or tools? The mileage counter on the cluster does not seem to work either. I checked the fuses but those seem to be good Iv...
by UNLIMITED 86
Tue Jul 09, 2019 8:53 am
Forum: TECH: 4A-GE ENGINE
Topic: Tips on Oil Restrictors
Replies: 18
Views: 562

Re: Tips on Oil Restrictors

Actually, the 4age crankcase is vented, something I learned recently, there is no PVC it's just vented outside of the manifold. Run some wire through the 'PVC' port and you'll find it just ports the crankcase to a spot just ahead of the throttle body. So manifold pressure won't have an affect on ca...
by UNLIMITED 86
Thu Jul 04, 2019 11:15 pm
Forum: TECH: 4A-GE ENGINE
Topic: Tips on Oil Restrictors
Replies: 18
Views: 562

Re: Tips on Oil Restrictors

factory oil pump & 8000rpm redline can't be compared to an elaborate dry sump & 9500+? rpm Totally different operating parameters. Wouldn't be surprised if the restrictor was 'overwelmed' in the latter Apples and oranges really. For a factory oil pump, high RPM is probably the worst case sc...
by UNLIMITED 86
Thu Jul 04, 2019 1:32 pm
Forum: Events
Topic: I rented a race track... Oregon Raceway Park - Sept 2019
Replies: 6
Views: 609

Re: I rented a race track... Oregon Raceway Park - Sept 2019

aukword1 wrote:Please take some video of the event, i want to see your cars in action!


I say we go! AE86 caravan from Socal anyone?
by UNLIMITED 86
Thu Jul 04, 2019 1:15 pm
Forum: TECH: 4A-GE ENGINE
Topic: Tips on Oil Restrictors
Replies: 18
Views: 562

Re: Tips on Oil Restrictors

Not really the case here. the late 4AGE, small port head, has a secondary oil return to make up for the inadequate oil return of the earlier models. It is a good size return, 5/8" I.D. planted in the head where OST had shown the AN fitting. The block has a tube pressed into the side and they a...
by UNLIMITED 86
Tue Jul 02, 2019 7:47 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: everything interior
Replies: 4
Views: 192

Re: WTB: everything interior

I might have some stuff you'd be interested in Where are you located? Coupe or Hatch? Cracked dash pads are the norm. Get used to it unless youre willing to spend a lot of $. The fuel level issue is likely caused by the sending unit inside the tank. Again, a common issue with this car. Sometimes, yo...
by UNLIMITED 86
Tue Jul 02, 2019 7:34 pm
Forum: TECH: 4A-GE ENGINE
Topic: Tips on Oil Restrictors
Replies: 18
Views: 562

Re: Tips on Oil Restrictors

jinx wrote: Inadequate crankcase breathing hindered oil drainback.


This makes sense.
by UNLIMITED 86
Mon Jul 01, 2019 8:26 pm
Forum: AE86 Parts & Accessories
Topic: AE86 GT-S Interior Pieces
Replies: 5
Views: 1826

Re: AE86 GT-S Interior Pieces

Sold those years ago, sorry.
by UNLIMITED 86
Mon Jul 01, 2019 8:17 pm
Forum: TECH: 4A-GE ENGINE
Topic: Tips on Oil Restrictors
Replies: 18
Views: 562

Re: Tips on Oil Restrictors

In my opinion... the oil pressure up kit is a bandaid fix and could possibly contribute to the problem... If excess oil is being supplied to the head to the point it begins to pool, resizing the orifice to limit that flow is the ideal fix. You will still have adequate oil supply and reduce the volum...
by UNLIMITED 86
Fri Jun 28, 2019 6:53 am
Forum: AE86 Parts & Accessories
Topic: AE86 GT-S Interior Pieces
Replies: 5
Views: 1826

Re: AE86 GT-S Interior Pieces

KoukiCookieEater wrote:If you still have the miscellaneous interior pieces, I'll take them. Let me know what you want for them shipped to 86326. I mainly need the side mirror bolt covers.


I believe I still have 1 set for power mirrors. PM me with your contact info or hit me up on OfferUp.
by UNLIMITED 86
Fri Jun 28, 2019 6:39 am
Forum: 4A-GE Engine Parts
Topic: AE86 PARTS GALORE!!! pics updated!
Replies: 9
Views: 908

Re: 16V 4AGE FCR41 engine build for sale!!!

cedu wrote:Bump for Rudy, legit seller.
100% would trust this dude.


+1
by UNLIMITED 86
Tue Jun 25, 2019 3:55 pm
Forum: Want to BUY (seeking sellers)
Topic: WANTED: AE86 parts (UPDATED)
Replies: 10
Views: 2470

Re: WANTED: AE86 parts (UPDATED)

:idea: bump :arrow:
by UNLIMITED 86
Tue Jun 25, 2019 3:46 pm
Forum: TECH: Corolla AE86
Topic: Dancing headlight issue
Replies: 4
Views: 242

Re: Dancing headlight issue

Try cleaning the connection to the retract relay (by the battery). Make sure the pins/plugs aren't corroded or caked with crap, and the wires arent broke.

The grease that was used in this connector is old and gotten pasty over the years. Not to mention it likey has collected lots of crap too.
by UNLIMITED 86
Tue Jun 18, 2019 7:21 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE Injectors Not Firing
Replies: 100
Views: 5506

Re: 4AGZE Injectors Not Firing

Alex170984 wrote:It now fires up! It was an earth problem and I fixed it in a different way but won't go into that.


Please explain what you found the exact cause to be and how you ultimately fixed it so that other members encountering this issue in the future know what to look at.

Conrats!
by UNLIMITED 86
Fri Jun 14, 2019 12:05 am
Forum: TECH: Corolla AE86
Topic: JDM redlines question
Replies: 4
Views: 370

Re: JDM redlines question

Did it work okay before you swapped the taillights?
by UNLIMITED 86
Tue Jun 11, 2019 10:38 pm
Forum: TECH: Corolla AE86
Topic: JDM redlines question
Replies: 4
Views: 370

Re: JDM redlines question

Your 3rd brakelight is hooked up to the running lights, but needs to be connected to the switch.

I didn't have to rewire mine- i just let the extra sockets dangle without bulbs.
by UNLIMITED 86
Fri May 24, 2019 7:02 pm
Forum: TECH: Corolla AE86
Topic: Rebuilding/remanufacturing racks
Replies: 12
Views: 741

Re: Rebuilding/remanufacturing racks

You're in socal?
by UNLIMITED 86
Fri May 17, 2019 1:24 pm
Forum: 4A-GE Engine Parts
Topic: silvertop trumpets 65mm length
Replies: 1
Views: 244

Re: silvertop trumpets 65mm length

Where are you located? PM sent.
by UNLIMITED 86
Fri May 17, 2019 1:23 pm
Forum: TECH: Corolla AE86
Topic: USDM AE86 TACH
Replies: 13
Views: 1031

Re: USDM AE86 TACH

Hopefully you have a multimeter.

Set it to check for continuity and test between the "black" wire you think is for the Tach, and the black wire going to the igniter.
by UNLIMITED 86
Sun May 12, 2019 4:01 pm
Forum: TECH: Corolla AE86
Topic: Front suspension question
Replies: 10
Views: 767

Re: Front suspension question

They flat out ignore the crazy lifted trucks, despite having light and bumper minimums and maximums though. Same in California. These trucks are also required to have mud flaps but most of them do not. This pisses me off cuz they have the potential to damage other vehicles but yet the law does not ...
by UNLIMITED 86
Sat May 11, 2019 9:30 pm
Forum: TECH: Corolla AE86
Topic: Front suspension question
Replies: 10
Views: 767

Re: Front suspension question

California tries to but they do it differently.

In CA your headlight must be XX inches from ground level. I think that number is 21 inches but dont quote me on it.
by UNLIMITED 86
Sat May 11, 2019 9:21 pm
Forum: TECH: 4A-GE ENGINE
Topic: Rough edges around combustion chambers
Replies: 13
Views: 844

Re: Rough edges around combustion chambers

Whatever you do, don't do this: https://i.postimg.cc/FHQGb4pN/4age-bad-headwork.jpg (Bigport head from a disassembled 4A-GE that I had bought, didn't see the head until after I bought everything.) This is why you don't want to use a dremel or any other powered tool. Looks like they started by deshr...
by UNLIMITED 86
Fri May 10, 2019 1:17 pm
Forum: TECH: 4A-GE ENGINE
Topic: Rough edges around combustion chambers
Replies: 13
Views: 844

Re: Rough edges around combustion chambers

Same here. Sorry for assuming.
by UNLIMITED 86
Fri May 10, 2019 1:12 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4agze swap wiring woes!
Replies: 7
Views: 601

Re: 4agze swap wiring woes!

Do you have fuel pressure? Is the fuel pump still controlled by the COR? You should be able to hear the fuel pump turn on but it's better to verify this with rail pressure (pump could be running but not producing adequate pressure to get fuel atomization). When the AFM detects intake flow, it provid...
by UNLIMITED 86
Fri May 10, 2019 12:45 pm
Forum: TECH: 4A-GE ENGINE
Topic: Rough edges around combustion chambers
Replies: 13
Views: 844

Re: Rough edges around combustion chambers

Im with OST on this one. I wouldn't use a dremel either. You dont need/want to remove much material. Like you said, you just want to eliminate potential hot spots and it doesn't take a lot to remove those high points around the edges. If your dad's an ex machinist, tell him you just want to deburr t...
by UNLIMITED 86
Fri May 10, 2019 4:33 am
Forum: TECH: Corolla AE86
Topic: Front suspension question
Replies: 10
Views: 767

Re: Front suspension question

This actually law exists? This is worse than California, which I didn't believe was possible! Several parts of this sound super subjective as well. How is it conducted, by a random person? What's the pass/fail criteria, whatever 'random person' feels is acceptable at any given time? What if that per...
by UNLIMITED 86
Thu May 09, 2019 4:34 pm
Forum: Fun Talk
Topic: Smog exemption???
Replies: 12
Views: 733

Re: Smog exemption???

I encourage everyone who is interested in this topic to read the actual laws for themselves. Understand what they actually say and how they say it. If youre a car enthusiast is California, this will only help you avoid paying unnecessary fines in the long run. Trust me, i bet ive paid more in fines ...
by UNLIMITED 86
Thu May 09, 2019 4:15 pm
Forum: Fun Talk
Topic: Smog exemption???
Replies: 12
Views: 733

Re: Smog exemption???

I believe the new exhaust law repeal was successful. Some of you have heard how loud my car is and you also know how many F#@%$ I give/gave. And I've heard that CHP actually has/uses DB meters to cite people for loud exhaust but your city police/sherriff do not (yet). A cops job is to protect and se...

Go to advanced search