any chance you have the airbox for the itbs?

any chance you have trumpet or the stock air box assembly?

Looking for the stock Airbox for a Silvertop that goes over the trumpets. really just need the base plate and cover, but if you have the stock piping and airbox that would be a plus. PM me if you have one for sale please.

i need the transmission can you pm me

got a set of blacktop trumpets for sale, they are the oem hard rubber ones and come with all hardware. $50 or trade straight across for a set of ones for a silvertop pm me if interested http://i.ebayimg.com/t/Toyota-20v-4ag-4age-Standard-Black-Top-Blacktop-Velocity-Stacks-Inlet-Trumpets-/00/s/NzMzWD...

I've sourced a c60 6 speed from a 2004 celica the bell housing is cracked but I was told my housing will bolt right up will I be able to use this with my driveshafts?

Can anyone tell me what us cars manual transmission will work for my application. Car is a 95 us spec Celica with a Australian blacktop and transmission in it.

my engine sits a little high on the passenger side, i flipped the pin going into the mound and it lowered it level but then the cv axles were making noise so i flipped it back. ill get a close up of the mount on my car.

the rubber bushings on the ends of the cables that go onto the selectors have quite a bit of slop in them, is there a solid alternative vs the rubber bushings?

I've got a USDM 95 Celica with an AU blacktop and transmission, my 2nd gear is gone and i have found a USDM 5 speed transmission locally but the bellhousings are completely different, can i swap the housing off the tranny that's in my car onto the new tranny I've sourced or do i need to get a whole ...

also if the car is off and i put it into second gear and rock the car it makes a grinding noise and the clutch is obviously not engaged because the car rolls, all other gears are fine.

car is a 95 celica ST with a Blacktop swap. transmission is a 5 speed. the issue im having is when i shift into 2nd gear and release the clutch pedal the transmission grinds, but it does not grind until i start releasing the pedal. sometimes it will engage second gear no problems but most of the tim...

i think the passenger side engine mount is wrong too on my car do you have a close up pic of your mount on the passenger side?

whoops, my bad about posting in the wrong section, its got a 5 speed gear box, it has an issue with second gear not sure where to post about that.

just picked up an ST202 with a blacktop swap. here are a few pics. look forward to being apart of the club. https://sphotos-b-iad.xx.fbcdn.net/hphotos-prn2/v/1209201_10201195865772447_1476946364_n.jpg?oh=9bcfee865023e11b346dfcb0bbfe1dcc&oe=522023C4 https://sphotos-b-iad.xx.fbcdn.net/hphotos-prn2...

WTB some trumpet/velocity stacks for my Blacktop. let me know what you have