Thank you for your response Morgan^^^ The motor is from a 1985 Toyota Mk1 Mr2 AW11. It's a large port 3 rib 4A-GE NA with blue black lettering on the valve covers. Also TVIS if that means anything. It does have an oil cooling line that runs from the oil filter to a cooler pipe and returns to the oil...

Does anyone know if the the 4A-GE Oil Pan in the Mk1 AW11 Mr2 is the same as the AE86 4A-GE Oil pan? Just wondering because I found an Mr2 Gem with a 58,000 mile 4A-GE engine. And I am very excited to swap out this low mileage motor in my AE86. Tried searching but didn't find much information. Thanks!

^^^^Thank you for that response If anyone else has some advice please let me know. Thank you

I would swap everything out, that's what I did. Surprisingly I had fun doing it. Also make sure you fix or clean up the areas while you're doing it. If you have all the parts, then swap all the parts. In my opinion, if you take short cuts you might end up with a "No Start" or some of your ...

Looking into getting a T50 JDM transmission from a right hand drive Corolla but I'm concerned that it won't fit my USDM AE86? I searched a little here and there but could not find a definite answer? Straight remove and replace? Are they the same mechanical wise? Different gear ratio? Is bolt pattern...

Got the parts!! Thanks Jayrdee!!! This guy is the man!!

I am still interested thank you for your response. Let send PM thanks!

Looking for adjustable cam gears and top 4A-GE Cam cover for my AE86. I know they sell some new ones out there but I'm on a budget build. Willing to buy used if they are in good condition. Thanks!

Looking to buy an intake manifold for 4A-GE Big Port for FCR41 Keihin Carburetors. Please let me know as I'm missing this part to get my Carburetor setup going. Thanks!

I use Kuhmo Ecsta's 205/50/15 in the rear and 195/50/15 in the front. The tire rubbing depends on your ride height and suspension setup. Also you might find that in the rear the 205/50/15 does rub when driving off curbs. Mine does anyways, even with coilovers and rear adjustable lateral rod. Your di...

Please check your messages sent you tracking number. Thanks

I have a used good one if you're ok with used. I can ship too.

Hola I would like to introduce myself, my name is Felix. I'm going to be building a little project nothing crazy just something for fun and I would like to show you my slow build. Ok let's get to the good stuffs.... [img]51448827792_8e996f7226_o[/img] I purchased this suspension set up it looks real...

Yes the headlight/grill mounting points are different depending on Zenki or Kouki. I found this out when I did the JDM Kouki front bumper and grill. You may have to trim the inserts on the grill, I didn't want to do that but it was either that or replace to Kouki headlight assemblies. In my opinion ...

Yes you will need Msd's tach adapter Part Number is 8920 if you want to use the STOCK TACH. Otherwise your msd box should have a tach wire, BUT only works on AFTERMARKET tachs. This is what I bought when I installed MSD programmable ignition on my carbed 4A-GE. It's a little pricey, but if you want ...

I made mine custom from my stock seat rails. Chopped up my oem seat sliding rails. All you need is a grinder and welder and a few Dos XX. Just make sure you don't spill your driNk!

Also sent you PM......

^^^Will have to check it out! Thanks for the response!

Looking to buy good driver side door hinges, top and bottom. Please let me know what you have. $ PayPal $ ready, I'm also willing to pay for shipping. Thanks!

Sent you PM!

Make sure you have a good GROUND (-), this happened to me on a 7M-GTE swap in my Mk2 Supra.

Bump!! Great Seller!! Very Fast Shipping!!

^Sent you PM

Found one! Thanks amigos!!

^^^Thanks for the info! May go this route if I can't find a good used one!

Looking to buy a good working starter for my AE86. I'm not sure if the SR5 is the same as the GTS but I'm in need of one. Willing to pay for shipping too! Thanks!

Interested! Sent you PM!

Thanks guys!!! Sure appreciate the info!!! Very good info there jondee86!! My respects to you!!! So now I know where to start!!!

ThaNks! Club4ag!!!

Thank you for the response CloudStrife, but that illustration is for the axles. I was referring to the ring and Pinion oil seal where the driveline connects to the rear differential.....

ThaNks!

I was checking my rear brakes the other day and I noticed that my differential is leaking oil from where the driveline connects to the differential. Looks like the seal may need to be replaced?? I checked the differential for wear/play where the driveline connects and has no excessive play that woul...