Hello everyone!
I have blacktop 4age freshly build.Any one use Ecumaster classic for it?
Could you send me base map ?
Thanks alot!
Search found 29 matches
- Tue May 05, 2020 6:20 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Ecumaster Classic For 4age Blacktop?
- Replies: 0
- Views: 3263
- Mon Oct 01, 2018 6:10 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Rebuilding 4AGE 20v BT
- Replies: 0
- Views: 2829
Rebuilding 4AGE 20v BT
Hello everyone, Unfortunately my engine dead. You can watch from here: (Turkish but you can understand) https://www.youtube.com/watch?v=6OS4mD2nd5M&t=1s I bought whole engine parts from Toyota, original OEM parts. https://www.youtube.com/watch?v=MWa06ObzvGc&t=1s Starts 5.53 :| What are the i...
- Tue Apr 10, 2018 12:09 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Blacktop shutsdown while pressing clucth
- Replies: 2
- Views: 3870
Re: Blacktop shutsdown while pressing clucth
Thanks everyone , It's all about ISCV issue. Removed, solved. made custom part for it.
- Mon Mar 26, 2018 10:01 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Blacktop shutsdown while pressing clucth
- Replies: 2
- Views: 3870
Blacktop shutsdown while pressing clucth
Hi everyone. I have 86 swapped Blacktop 20V running with Vems Ecu. When you rev on first gear, engine shutsdown while pressing clucth. If you drive normally no problem. Plus interesting thing is when you rev the engine and stop the car, Starter motor doesnt work. But starts perfectly when cold.I don...
- Fri Nov 03, 2017 8:55 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4age cooling system
- Replies: 3
- Views: 6510
Re: 4age cooling system
I had the same problem, My problem is air blocked in heater system. When you install the new water pump, MAybe there is some air in your heater system, it will affect your water flowing. I tried this. Park somewhere a vehicle with the front upright. Turn heater to hot position. Dont start the car wa...
- Wed Nov 01, 2017 11:46 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
https://www.youtube.com/watch?v=Ezh2p_qzOA0
Hello, First Test Video
Max Rev Limited to 6000
VVTI off.
I will check timing again, When we set 10 degree in diagnostic mode, Mark must be 16 degree?
Btw with this setup car runs perfectly and smoothly.
Hello, First Test Video
Max Rev Limited to 6000
VVTI off.
I will check timing again, When we set 10 degree in diagnostic mode, Mark must be 16 degree?
Btw with this setup car runs perfectly and smoothly.
- Sun Oct 22, 2017 11:19 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: RWD water relocation kit opinions?
- Replies: 7
- Views: 8730
Re: RWD water relocation kit opinions?
No problem mate, Some hints for you before install:
Check 2 sensor at the back and ready cables for them, It is very difficult to work here.
But It will be very hard to install this kit with the engine still in the car, Good luck!
Check 2 sensor at the back and ready cables for them, It is very difficult to work here.
But It will be very hard to install this kit with the engine still in the car, Good luck!
- Sat Oct 21, 2017 1:35 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Weird Radiator Problem
- Replies: 11
- Views: 13958
Re: Weird Radiator Problem
Thanks for replies guys, Today I will try to fix it!
- Fri Oct 20, 2017 3:36 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Weird Radiator Problem
- Replies: 11
- Views: 13958
Re: Weird Radiator Problem
I went to service today and recognized my heater is not working. We took it off heater hose. water didnt come up(when car is running). They told me water pump is not power enough for this radiator setup. But lots of people use this radiator. Maybe my water pump doesnt work properly or my heater radi...
- Wed Oct 18, 2017 11:29 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Weird Radiator Problem
- Replies: 11
- Views: 13958
Re: Weird Radiator Problem
btw I'm using standalone ECU and SQ Relocation Kit.
- Wed Oct 18, 2017 11:29 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Weird Radiator Problem
- Replies: 11
- Views: 13958
- Wed Oct 18, 2017 2:16 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Weird Radiator Problem
- Replies: 11
- Views: 13958
Weird Radiator Problem
https://image.ibb.co/h75Bkm/fgh.jpg Hello, me again with new problem. We swapped 4AGE 20V to ae86. And I have Mishimoto fan and radiator kit for ae86. We mount a adaptor and fan temp sensor to upper radiator hose. When we start the engine, Temp is good but problem is my fans are almost always worki...
- Fri Oct 13, 2017 2:12 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
totta crolla wrote:My pleasure, glad it worked out for you.
Nice car and engine by the way !
^_^ Thanks!!
- Thu Oct 12, 2017 11:35 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Hello and thank you all guys.. I set timing at 8 degree(Our fuel in Turkey is 95 Octane, car runs perfectly at 8 degree), after diagnostic mode we can see 15-16 degree (which is good). Distribitor at advance position.(clockwise) And ECU mode we setted 29 degree at trigger wheel setup. Idle at 1100 r...
- Wed Oct 11, 2017 2:03 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
Yes correct but adjust the ecu to match the engine. Ok but sorry I'm newbie, how can i know my engine timing? Is it for 10? You will need a timing light, a small bright mark (white paint) on your bottom pulley at '0' (TDC) and a reference mark on the engine. See post above. There are 1001 videos on...
- Wed Oct 11, 2017 1:33 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
totta crolla wrote:Mehmaddict wrote:So for understanding, We have to see same ignition timing engine and ecu?
Yes correct but adjust the ecu to match the engine.
Ok but sorry I'm newbie, how can i know my engine timing? Is it for 10?
- Wed Oct 11, 2017 12:44 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
So for understanding, We have to see same ignition timing engine and ecu?
- Tue Oct 10, 2017 11:16 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
PROJECT UPDATE: Turn crankshaft 4 time (to make sure) Match 3 points at cams. We put a screwdriver on Piston1. When at 3 marks matched position , screwdriver rising to max position. Then paint 0 degree at crank pulley, set timing to 10 degree.. Glowing looks gone, tested 15 min, we can touch headers...
- Tue Oct 10, 2017 7:16 am
- Forum: General Accessories and Parts
- Topic: JDM DIGITAL CLUSTER
- Replies: 15
- Views: 27306
Re: JDM DIGITAL CLUSTER
Mystery says no one can install these on LHD 86
- Tue Oct 10, 2017 7:13 am
- Forum: TECH: 4A-GE ENGINE
- Topic: RWD water relocation kit opinions?
- Replies: 7
- Views: 8730
Re: RWD water relocation kit opinions?
Hello,
I'm using this kit. It's perfect.
Easy to install, good quality,
My website is Turkish but you can check how its fit to my 20v blacktop:
https://ae86project.com/2014/12/29/20v-alisverisi/
I'm using this kit. It's perfect.
Easy to install, good quality,
My website is Turkish but you can check how its fit to my 20v blacktop:
https://ae86project.com/2014/12/29/20v-alisverisi/
- Tue Oct 10, 2017 7:06 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
Hmmmm.... have you confirmed that the piston is @ TDC when you are checking cam timing?? Crank key should be pointing straight up... but even that can still be off. Only way to KNOW TDC is with a piston stop, and a timing wheel. There is also something wrong in the blacktop manual (I remember a thr...
- Tue Oct 10, 2017 5:49 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
I m not sure either but http://3.bp.blogspot.com/-bcaSs4AtCK4/Tea4bIKDl0I/AAAAAAAAAWw/i0p6f4vJv7o/s1600/15installcamgearmarks.jpg I think when cams matched engine is at tdc position ( If 0 degree means TDC) We tried by using ECU whole day, nothing, still glowing... Because we dont know the advance s...
- Tue Oct 10, 2017 5:12 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
My theory is: In tdc position paint new mark at 0 degree on Crank Pulley, that is what I have got..
- Tue Oct 10, 2017 5:10 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
I'm using Beast. Turkish brand but same as VEMS.
- Tue Oct 10, 2017 4:11 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
We can control Coils on ECU. The car is working perfect (looks) But problem is glowing...
So in this position it is TDC right?
So in this position it is TDC right?
- Tue Oct 10, 2017 3:58 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
Woav ! Thank you man, I will try this tonight.
Thanks for fast reply, you are rock.
Thanks for fast reply, you are rock.
- Tue Oct 10, 2017 3:22 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
Re: 4AGE 20V MANIFOLD GLOWING! HELP
Thanks for reply. We blocked the VVTi for the first run, There is not notch for 4age 20v onT3 Crank pulley, the tell me about positions I tried them It s wrong When we painted at 12:00 position, TDC dont match. So I want the try this, please tell me I'm doing right or not I dont want to blown the en...
- Mon Oct 09, 2017 11:53 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
- Replies: 28
- Views: 25314
4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Hello all, I'm new here and I need your help.. I'm restoring a levin 86.. https://ae86project.files.wordpress.com/2017/01/img_0558.jpg?w=1075 and swap 4age 20v engine. https://ae86project.files.wordpress.com/2017/09/img_68651.jpg?w=1075 Using Standalone ECU, IK20 Iridium Sparks, VW Polo Gti Coil, Ev...
- Wed Jul 22, 2015 7:55 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB Levin Fender Light
- Replies: 0
- Views: 1583
WTB Levin Fender Light
Hi all!
I need Levin Fender Light Left/Driver Side (EU)
Need international shipping,(Turkey) i can pay via Paypal
Thanks all!
I need Levin Fender Light Left/Driver Side (EU)
Need international shipping,(Turkey) i can pay via Paypal
Thanks all!