I found a thread on a guy boosting a stock big port on 8psi while using the stock ecu and 7mgte injectors oh also fmu etc. I do have an fmu 12:1 sitting on my desk (was gonna use it for a miata turbo project) and now I might use it on the 4age build.

http://forums.club4ag.com/zerothread?id=982

Some 87s have been known to have 18/42 rotating assembly in 7 rib blocks so you will want to make sure you have the later 20/42 rotating assembly. If so then the only difference is the pistons. Everything else in the bottom end is the same between 7 rib NA and GZE. My question for you is if GZE pis...

I want to know what it takes to get turbo pistons, rods and put them into the 7 rib big port block. Then turbo kit, injectors and run a stand alone like mega squirt with map, coil packs, knock sensors etc. I need to know if the rod journals are the same on the pig port 1987 7 rib motor and if it has...

Looking for good running bluetop block with head for my 86, or a used 20v blacktop motor with harness and ecu in GTA area

Hey do you still have this lsd? Also how much is it to ship to toronto ontario?

SOLD

Up for sale a rare 1987 kouki diff, it has one bent axle shaft on the driver side so its good for parts or pull it out and replace it, it also needs the dust shield on that side too (rotten off). Diff and other axle shaft are good but the housing needs a good cleaning for paint or you can leave it a...

Sad c4ag lost most info anyways, I need to know where the fuel pump relay and fuse is located, tried to find it but no luck.