Search found 2639 matches

by jondee86
Tue Oct 29, 2013 1:00 pm
Forum: Fun Talk
Topic: headers are burning my feet
Replies: 18
Views: 4808

Re: headers are burning my feet

If the problem is caused by heat radiating from the exhaust tubing and heating the floor, the best solution is to prevent radiant heat reaching the floor. Therefore, in order of effectiveness, you have these possible solutions... 1. Reflective heat shield that allows airflow on both sides, mounted b...
by jondee86
Mon Oct 28, 2013 4:59 pm
Forum: TECH: Corolla FWD / MR2
Topic: Te72 Shifter Shaking
Replies: 1
Views: 1053

Re: Te72 Shifter Shaking

I would be surprised if the shifter shaking at constant speed is caused by bad engine or transmission mounts. Twisting of the engine and transmission is more likely to be caused by uneven power impulses from the engine. Maybe you have one cylinder down on power from a blocked injector, bad spark lea...
by jondee86
Mon Oct 28, 2013 1:20 pm
Forum: TECH: Corolla AE86
Topic: T3 Tall Shift Kit
Replies: 18
Views: 4530

Re: T3 Tall Shift Kit

Pretty sure that T3 do a bushing kit for tightening up the stock shifter.

Cheers... jondee86
by jondee86
Mon Oct 28, 2013 12:38 pm
Forum: TECH: Corolla AE86
Topic: T3 Tall Shift Kit
Replies: 18
Views: 4530

Re: T3 Tall Shift Kit

Maybe I can clear up a bit of confusion here ?? 1. What is commonly referred to as a "short shifter" is actually a "quick shifter". It is designed to change the geometry of the shifter to make changing gears quicker, and by coincidence, this also makes the throw shorter :shock: 2...
by jondee86
Sat Oct 26, 2013 6:22 am
Forum: TECH: 4A-GE ENGINE
Topic: starting issue
Replies: 4
Views: 1330

Re: starting issue

The two tubes pointing down are for the water hoses. The two tubes pointing out without caps are for the P/S. The one with the cap is for the A/C idle-up (I think ?). The water tubes don´t need to be capped, but all other tubes must be capped. Use a piece of hose (or whateva) to see if you can easil...
by jondee86
Fri Oct 25, 2013 4:03 pm
Forum: TECH: Corolla AE86
Topic: Shaking/bouncing rear when dropping the clutch to initiate.
Replies: 18
Views: 4523

Re: Shaking/bouncing rear when dropping the clutch to initia

Just a few random thoughts.... - Did you match the length of the adjustable links to the OEM links ? - No chance you shortened the new links enough to cause the spline in the back of the gearbox to bottom out ?? - Pinion nose pointing down ?? - Driveshaft been assembled without "phasing" t...
by jondee86
Fri Oct 25, 2013 1:17 pm
Forum: TECH: 4A-GE ENGINE
Topic: Changed timing belt..now it wont start
Replies: 29
Views: 5718

Re: Changed timing belt..now it wont start

1. 0 TDC = crank notch against timing cover? OR little slot on timing gear against oil pump? Just because I´ve got time on my hands :) When the #1 cylinder is at TDC on the compression stroke, the timing gear mark matches to the dimple on the oil pump AND the notch on the crank pulley matches to th...
by jondee86
Fri Oct 25, 2013 11:36 am
Forum: TECH: 4A-GE ENGINE
Topic: starting issue
Replies: 4
Views: 1330

Re: starting issue

You need to look underneath the throttle body and see if the thermostatic idle-up valve is still there (part inside the red circle). Often, if the valve does not work properly, instead of fixing the valve, it will be removed, and a blank plate fixed in its place. Then you will get the cold starting ...
by jondee86
Fri Oct 25, 2013 7:54 am
Forum: TECH: Corolla AE86
Topic: BT 20V (lack of)heating Woes
Replies: 3
Views: 1082

Re: BT 20V (lack of)heating Woes

no sure how the water flows through a bt, anyone have any ideas or diagrams? Don´t know exactly what you did with your cooling system, but if the back of the head is not getting hot, perhaps you didn´t do the bypass port detail ?? Have a read of this... http://s-86.com/s-newcoolingguide.html Maybe ...
by jondee86
Fri Oct 25, 2013 7:28 am
Forum: TECH: 4A-GE ENGINE
Topic: Toda Camshaft timing with VVT
Replies: 1
Views: 991

Re: Toda Camshaft timing with VVT

Just looking at the numbers on the cam card I see... INTAKE CAM OPEN 11.5 ATDC CLOSE 58.5 ABDC LOBE CENTRE 125 ATDC (assume symmetrical lobe) DURATION 227 (at some opening less than 1mm) The minus sign in front of the 11.5 is a bit confusing ?? The figures only add up if this is 11.5 ATDC. The cam c...
by jondee86
Fri Oct 25, 2013 5:33 am
Forum: TECH: Corolla AE86
Topic: Check Engine Light, goes off @ 4000 ish rpms
Replies: 7
Views: 2128

Re: Check Engine Light, goes off @ 4000 ish rpms

Inside the distributor is all solid state... just reluctors to read the timing wheels, and generate very low voltage signals for the ECU. You could check the wiring for signs of chafing or damage just where the wires enter the distributor and flex a lot... and make sure the connector plug is pushed ...
by jondee86
Thu Oct 24, 2013 3:59 pm
Forum: TECH: Corolla AE86
Topic: ae86 exhaust system clogged
Replies: 17
Views: 3627

Re: ae86 exhaust system clogged

Your engine is already broken in if you have completed the procedure I posted. Now you should change the oil and filter and drive the car in a "sporting" manner. This means constantly varying the engine speed and load by using all the gears. And don´t be afraid to run it to red line now an...
by jondee86
Tue Oct 15, 2013 10:15 pm
Forum: TECH: 4A-GE ENGINE
Topic: When is a hot start a cold start?
Replies: 9
Views: 2953

Re: When is a hot start a cold start?

http://i1.kym-cdn.com/photos/images/original/000/356/587/3ac.jpg ... but the last I heard oil does not conduct electricity. So how is a bit of oil on the outside of the plug going to interfere with anything ?? Oh, and I'm pretty sure those cam cover gaskets are supposed to be replaced every 25 year...
by jondee86
Mon Oct 14, 2013 4:50 pm
Forum: TECH: 4A-GE ENGINE
Topic: When is a hot start a cold start?
Replies: 9
Views: 2953

Re: When is a hot start a cold start?

Are you still running the factory thermostatic idle-up valve ?

Cheers... jondee86
by jondee86
Mon Oct 14, 2013 2:31 pm
Forum: TECH: Corolla AE86
Topic: opinions on coilover spring rates for daily/ light street.
Replies: 27
Views: 7193

Re: opinions on coilover spring rates for daily/ light stree

This man ^^^ speaks the truth....

Cheers... jondee86
by jondee86
Mon Oct 14, 2013 2:22 pm
Forum: TECH: Corolla AE86
Topic: Hatch glass transplant advice needed.
Replies: 8
Views: 1964

Re: Hatch glass transplant advice needed.

I haven't used them myself... they just popped up in a search. Around here most people seem to make their own out of thin steel or alloy. An angle or small channel section, length and stiffness to suit the application. Probably try to get a little bit of a curve in them as the hatch glass is not fla...
by jondee86
Mon Oct 14, 2013 12:07 am
Forum: TECH: Corolla AE86
Topic: Brake Woes (Pedal Stiffening, Brakes stuck).
Replies: 4
Views: 1216

Re: Brake Woes (Pedal Stiffening, Brakes stuck).

Could this happen if the one way valve in the vacuum pipe was fitted the wrong way around ? Not if having the one-way valve around the wrong way, was the only thing wrong with the brake booster. All that would happen is that there would be no vacuum assistance. The pedal would be hard, and you woul...
by jondee86
Sun Oct 13, 2013 8:55 pm
Forum: TECH: Corolla AE86
Topic: Hatch glass transplant advice needed.
Replies: 8
Views: 1964

Re: Hatch glass transplant advice needed.

Maybe these....

Image

... from here... http://www.arbodies.com/page/19?siteid=1&id=65044626&s=1

Cheers... jondee86
by jondee86
Sun Oct 13, 2013 5:37 pm
Forum: TECH: Corolla AE86
Topic: 20v blacktop 02 sensor
Replies: 13
Views: 3221

Re: 20v blacktop 02 sensor

alavelle12 wrote:if you have blacktop you can use a 3sge o2 sensor from an mr2

In which case the pics from this link might be useful :)

http://www.mr2australia.com/mr2play/tm.aspx?m=94348

Cheers... jondee86
by jondee86
Sun Oct 13, 2013 3:18 pm
Forum: TECH: Corolla AE86
Topic: 20v blacktop 02 sensor
Replies: 13
Views: 3221

Re: 20v blacktop 02 sensor

As far as I know the AE111 was not sold in the US, nor any car fitted with the 20V BT engine. So the sensors are JDM and US dealers will not have the O2 sensor listed as a standard part. It will be special order from Japan, and $$$. I have read that some people have had success using sensors from ot...
by jondee86
Sat Oct 12, 2013 6:01 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4age 16 ITBs, 272 cams, 4-2-1,power fc *tune file inside*
Replies: 16
Views: 7061

Re: 4age 16 ITBs, 272 cams, 4-2-1,power fc *tune file inside

Hiya... I'm guessing that you are posting this .dat file as that is the file type that your PFC outputs for saving ? However, and guessing again, you probably need a PFC or the PFC software to load and view the file ? What would be a lot better for me, and all the other guys who don't have a PFC, wo...
by jondee86
Sat Oct 12, 2013 5:39 pm
Forum: TECH: Corolla AE86
Topic: 20v blacktop 02 sensor
Replies: 13
Views: 3221

Re: 20v blacktop 02 sensor

Part 89465-19685 (SENSOR, OXYGEN) was found on the following models: Date range Model Frames/Options 06/1991-05/2002 TOYOTA COROLLA AE10*,CE10*,EE10* 05/1995-07/2000 TOYOTA COROLLA AE11*,CE11*,EE111 05/1995-07/2000 TOYOTA SPRINTER AE11*,CE11*,EE111 06/1991-07/1998 TOYOTA LVN AE10* 05/1995-07/2000 T...
by jondee86
Sat Oct 12, 2013 2:25 pm
Forum: TECH: Corolla AE86
Topic: Ae86 oil pan
Replies: 2
Views: 792

Re: Ae86 oil pan

Have a read of this...

http://forums.club4ag.com/zerothread?id=106472

Cheers... jondee86
by jondee86
Fri Oct 11, 2013 7:37 pm
Forum: TECH: Corolla AE86
Topic: Brake Woes (Pedal Stiffening, Brakes stuck).
Replies: 4
Views: 1216

Re: Brake Woes (Pedal Stiffening, Brakes stuck).

Have a read of this thread... http://www.ae86irl.com/forum/showthread.php?51644-Rear-brakes-sticking-issue Cheers... jondee86 EDIT: For the benefit of anyone who can't view the above thread, the keys points are... It is essential for proper brake operation, that the brake master is not pre-loaded in...
by jondee86
Thu Oct 10, 2013 11:59 pm
Forum: TECH: Corolla AE86
Topic: ae86 exhaust system clogged
Replies: 17
Views: 3627

Re: ae86 exhaust system clogged

Dude... you have got some kind of a timing problem. Maybe the cams are not timed to the crank pulley, or maybe the exhaust cam sprocket is on back to front, or maybe squirrels made a nest in your exhaust :shock: I would guess that your exhaust valves are opening too soon and/or your ignition is way ...
by jondee86
Thu Oct 10, 2013 8:30 pm
Forum: TECH: 4A-GE ENGINE
Topic: Need comments 20v dyno chart
Replies: 44
Views: 8600

Re: Need comments 20v dyno chart

Your graph didn't post. Torque is irrelevant until you assign it RPM then you have a measurable unit of work. In the US this unit of work is usually called HP. What you are looking for is more low end horsepower. We would have to look at your graph and compare it to some others to see if it looks h...
by jondee86
Wed Oct 09, 2013 1:04 am
Forum: TECH: 4A-GE ENGINE
Topic: AE86 Standalone Management
Replies: 2
Views: 1842

Re: AE86 Standalone Management

Since I don't know how much of the original wiring you have, I can only comment in general terms. This is how it happens with the factory ECU... Turning the keyswitch ON will supply power directly to the injectors, ignition coil and igniter. It will also put 12V on the EFI Main Relay coil. When the ...
by jondee86
Mon Oct 07, 2013 8:41 pm
Forum: TECH: Corolla AE86
Topic: Swap whats the best route
Replies: 12
Views: 3513

Re: Swap whats the best route

Read ALL of this...

http://forums.club4ag.com/zerothread?id=6239

... and profit :mrgreen:

Cheers... jondee86
by jondee86
Mon Oct 07, 2013 2:15 am
Forum: TECH: Corolla AE86
Topic: The question that gets asked. #284 sw20 in ae86
Replies: 24
Views: 12058

Re: The question that gets asked. #284 sw20 in ae86

Because sometimes pictures are worth a lot of words :) http://i984.photobucket.com/albums/ae328/jondee1/ae86frontsus01_zps6d14115f.jpg The standard OEM cartridge length is around 400mm, and if we use the KONI SW20 front insert as an example, the cartridge length is around 340mm. Thus, ignoring such ...
by jondee86
Fri Oct 04, 2013 5:03 pm
Forum: TECH: Corolla AE86
Topic: HELP blew fuse or relay won't start, or turn over
Replies: 6
Views: 1687

Re: HELP blew fuse or relay won't start, or turn over

Going nowhere so.... LOCKED

Go to advanced search