Search found 455 matches

by Jeonsah
Thu Aug 03, 2017 5:56 am
Forum: TECH: 4A-GE ENGINE
Topic: 20v reving between gears
Replies: 9
Views: 7765

Re: 20v reving between gears

When the engine initially starts, the revs go to 3500rpm or so and they drop back down (normal speed) to 1000 rpm and stay there. I had adjusted the idle stop (the one stop that controls all 4 throttle openings) to move the idle to where I wanted it (1000 rpm). Is the vacuum servo the metal diaphram...
by Jeonsah
Wed Aug 02, 2017 8:02 pm
Forum: TECH: 4A-GE ENGINE
Topic: 20v reving between gears
Replies: 9
Views: 7765

20v reving between gears

Hey guys, I have a blacktop 20v 4age with a haltech elite 1500. I got tired of dealing with my iscv so I decided to remove it from the engine. Now when I shift gears, the engine will rev 500 rpm or so in between the gear shift. It is making smooth driving somewhat difficult. Also when the car starts...
by Jeonsah
Thu Jul 13, 2017 5:59 am
Forum: Shops, Manufacturers, and Retailers Only
Topic: Sakura Fab: W58/R154 to AE86 Transmission Mount
Replies: 31
Views: 44904

Re: Sakura Fab: W58/R154 to AE86 Transmission Mount

Sent you an email. I am interested in getting one of these. Thanks!
by Jeonsah
Fri Jul 07, 2017 5:50 am
Forum: TECH: Corolla AE86
Topic: T50 rebuild - replacement gears?
Replies: 6
Views: 6822

Re: T50 rebuild - replacement gears?

Thanks Autohaus_Z. I am actually considering a w series transmission at the moment.
by Jeonsah
Thu Jul 06, 2017 11:55 am
Forum: TECH: Corolla AE86
Topic: T50 rebuild - replacement gears?
Replies: 6
Views: 6822

Re: T50 rebuild - replacement gears?

I will take a picture of the 2nd gears in the T50's I have opened up. If I am going to take the thing apart completely I would really feel a lot better about replacing the most used gear. I read in a previous post that you can file the teeth on the gear back to shape. Has anyone done this and had su...
by Jeonsah
Thu Jul 06, 2017 6:01 am
Forum: TECH: Corolla AE86
Topic: T50 rebuild - replacement gears?
Replies: 6
Views: 6822

T50 rebuild - replacement gears?

I recently started having some grinding issues when shifting into second gear. I cracked open a couple extra mystery condition T50's to take a look at the condition of them. It looks like one of them has a bad second gear (syncro and collar teeth are both worn pretty good). The other looks to be in ...
by Jeonsah
Wed Jul 05, 2017 11:54 am
Forum: TECH: Corolla AE86
Topic: Zenki door panel cup repro feeler
Replies: 6
Views: 6660

Re: Zenki door panel cup repro feeler

I would be interested in a blue set.
by Jeonsah
Wed Jun 28, 2017 6:44 am
Forum: TECH: Corolla AE86
Topic: MK3 int. shaft and manual rack swap
Replies: 23
Views: 16990

Re: MK3 int. shaft and manual rack swap

How did the rack feel after you adjusted the nut/cap that holds the retainer spring and rack guide? Did you test drive it?
by Jeonsah
Fri Jun 09, 2017 7:13 am
Forum: TECH: 4A-GE ENGINE
Topic: Hi, 20v st (bt electronic)
Replies: 17
Views: 13602

Re: Hi, 20v st (bt electronic)

I have a blacktop 20v 4age and there really isnt that big of a difference when it kicks in. The engine revs slightly faster.. thats about it. :P
by Jeonsah
Wed Jun 07, 2017 11:19 am
Forum: TECH: Corolla AE86
Topic: MK3 int. shaft and manual rack swap
Replies: 23
Views: 16990

Re: MK3 int. shaft and manual rack swap

I am not sure what the official name is for the 3M product nor do I know where to get it. I had a friend who had used it and told me about it. He had some play in his column/intermediate shaft that he fixed with the 3M rubber stuff. Might be worth giving 3M a call yourself and ask them. In regards t...
by Jeonsah
Wed Jun 07, 2017 5:49 am
Forum: TECH: Corolla AE86
Topic: MK3 int. shaft and manual rack swap
Replies: 23
Views: 16990

Re: MK3 int. shaft and manual rack swap

Johnoae86 you could try undoing the 2 ujoint bolts and seeing if you can get it off without removing the column. Otherwise, you will probably have to pull the column out.
by Jeonsah
Tue Jun 06, 2017 8:41 am
Forum: TECH: Corolla AE86
Topic: MK3 int. shaft and manual rack swap
Replies: 23
Views: 16990

Re: MK3 int. shaft and manual rack swap

The intermediate shaft has rubber on it from the factory. So I would assume it is fine. Most if not all of the shaft's movement is horizontal. The female end on the column where the shaft plugs into is shaped a certain way. So the shaft cannot spin inside the column at all. The only way the intermed...
by Jeonsah
Mon Jun 05, 2017 5:49 am
Forum: Shops, Manufacturers, and Retailers Only
Topic: NST Summer GROUP BUY - Pulley Kits - 4AG - SR - F20
Replies: 68
Views: 77885

Re: NST Summer GROUP BUY - $86.00 Pulley Kits - 4AG - SR - F20

I am going to have to remove myself from the group buy but it looks like you guys reached your number so you are good to go! Here is the updated list: 00. NonStopTuning (AE86 4AGE KIT) red 01. morgan (single row AE86 4AGE KIT) red 02. morgan-for A.Orama (single row AE86 4AGE KIT) red 03. morgan-for ...
by Jeonsah
Thu Jun 01, 2017 1:32 pm
Forum: TECH: Corolla AE86
Topic: MK3 int. shaft and manual rack swap
Replies: 23
Views: 16990

Re: MK3 int. shaft and manual rack swap

The intermediate shaft should sit halfway inside the open space in the ujoint. So what you could do is push the intermediate shaft all the way out into the ujoint to the point where it is bottoming out against the actual internal ujoint inside the ujoint. Verify that your steering cant move anymore ...
by Jeonsah
Thu Jun 01, 2017 1:23 pm
Forum: Want to BUY (seeking sellers)
Topic: Looking for Ae86 Lightswitch + Fuel door
Replies: 2
Views: 2884

Re: Looking for Ae86 Lightswitch + Fuel door

How is it broken? If it is physically broken then it is more than likely the contact points inside. You can take it apart and solder them again. Takes like 20 minutes of mindless work to do. I have done this on a few of them and they work every time. Give it a try.
by Jeonsah
Wed May 31, 2017 6:41 am
Forum: TECH: Corolla AE86
Topic: MK3 int. shaft and manual rack swap
Replies: 23
Views: 16990

Re: MK3 int. shaft and manual rack swap

Not sure if it helps any but the stock AW11 manual rack is taller than the AE86 manual rack. So the pinion gear sticks out of the housing pretty far. The pinion gear height isnt really adjustable. The end of the gear slides directly into a bearing inside the bottom of the housing.
by Jeonsah
Tue May 30, 2017 6:03 am
Forum: TECH: 4A-GE ENGINE
Topic: Getting stock tachometer to work with haltech ecu?
Replies: 9
Views: 13527

Re: Getting stock tachometer to work with haltech ecu?

So I finally got this issue fixed. I followed this guide (the external version on page 2) for the "tacho booster": http://www.toymods.org.au/forums/threads/22574-How-To-Tacho-Booster I went to the local electronics store and picked up the diode, transistor, and resistor needed. Tachometer ...
by Jeonsah
Fri May 26, 2017 7:07 am
Forum: Shops, Manufacturers, and Retailers Only
Topic: NST Summer GROUP BUY - Pulley Kits - 4AG - SR - F20
Replies: 68
Views: 77885

Re: NST Summer GROUP BUY - $86.00 Pulley Kits - 4AG - SR - F20

I am using the RS Chita conversion on my BT20V. So I will need the following: 16v 4age AE86 alternator pulley 16v 4age AE86 water pump pulley 20v 4age crank pulley 00. NonStopTuning (AE86 4AGE KIT) red 01. morgan (single row AE86 4AGE KIT) red 02. morgan-for A.Orama (single row AE86 4AGE KIT) red 03...
by Jeonsah
Wed May 24, 2017 6:59 am
Forum: Shops, Manufacturers, and Retailers Only
Topic: NST Summer GROUP BUY - Pulley Kits - 4AG - SR - F20
Replies: 68
Views: 77885

Re: NST Summer GROUP BUY - $86.00 Pulley Kits - 4AG - SR - F20

Can we mix and match? I believe I need a 20v crank pulley with a 16v water pump and alternator. If you can, put me down for a set in green.
by Jeonsah
Mon May 22, 2017 9:06 am
Forum: TECH: 4A-GE ENGINE
Topic: Getting stock tachometer to work with haltech ecu?
Replies: 9
Views: 13527

Re: Getting stock tachometer to work with haltech ecu?

So I looked around for one of these relays in my spare parts box and did not find one. I ended up using two spare EFI relays. The tachometer seemed to be stable all the way through the rpm. Then I took the car for a good drive and tried revving it again (redline from 1 - 3 gears). The tachometer nee...
by Jeonsah
Wed May 17, 2017 5:45 am
Forum: TECH: 4A-GE ENGINE
Topic: Getting stock tachometer to work with haltech ecu?
Replies: 9
Views: 13527

Re: Getting stock tachometer to work with haltech ecu?

Just thought I would share some more information about this. I am using the setup that Jondee has listed above and the tachometer is still having some troubles revving beyond 5k rpm. I talked with Haltech and he said to try hooking up two relays to give it more kick. So if you run into this situatio...
by Jeonsah
Mon Apr 24, 2017 2:14 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB- SR5/GTS cluster
Replies: 4
Views: 4703

Re: WTB- SR5/GTS cluster

I believe I have a kouki sr5 cluster. No pigtails. If you are interested send me a private message on here with your contact info.
by Jeonsah
Tue Apr 18, 2017 6:18 am
Forum: AE86 Parts & Accessories
Topic: GTS Partout Southern California
Replies: 70
Views: 55442

Re: GTS Partout Southern California

How much for the dash harness?
by Jeonsah
Tue Apr 18, 2017 5:56 am
Forum: TECH: 4A-GE ENGINE
Topic: Haltech basemap for 20v 4age 1nz coils
Replies: 1
Views: 3248

Haltech basemap for 20v 4age 1nz coils

Hey guys,

I am using a haltech elite 1500 and I am curious to know if anyone has a basemap for the following:

stock BT20V 4age with 1nz coil on plugs.

If you happen to have one, send me a private message and then I will provide you with my email address.

Thank you
by Jeonsah
Thu Apr 13, 2017 1:03 pm
Forum: TECH: Corolla AE86
Topic: SR5 vs GTS Headlight harness
Replies: 3
Views: 4036

Re: SR5 vs GTS Headlight harness

I ended up not getting to it. Sorry!
by Jeonsah
Wed Apr 12, 2017 6:59 am
Forum: TECH: 4A-GE ENGINE
Topic: Getting stock tachometer to work with haltech ecu?
Replies: 9
Views: 13527

Re: Getting stock tachometer to work with haltech ecu?

Thanks Jondee, you are the man!
by Jeonsah
Tue Apr 11, 2017 6:26 am
Forum: TECH: 4A-GE ENGINE
Topic: Getting stock tachometer to work with haltech ecu?
Replies: 9
Views: 13527

Getting stock tachometer to work with haltech ecu?

Hey everyone, Have any of you gotten your stock tachometer working correctly with a haltech ecu? I am using the haltech Elite 1500... I did some research on it and have not found too much about it. It appears that some people have tried using the MSD 8910 adapter but have not directly said whether i...
by Jeonsah
Thu Mar 16, 2017 5:43 am
Forum: AE86 Parts & Accessories
Topic: manual rack for sale
Replies: 1
Views: 2849

Re: manual rack for sale

Item has been sold.
by Jeonsah
Wed Mar 15, 2017 10:30 am
Forum: AE86 Parts & Accessories
Topic: manual rack for sale
Replies: 1
Views: 2849

manual rack for sale

I have an AE86 manual rack for sale. Just the rack and the ujoint. Looking to get $200 shipped. The rack has been cleaned, painted and regreased. If you are interested, you can txt me at:

719-23five-zerozero92

Thanks

8-)
by Jeonsah
Mon Mar 13, 2017 2:00 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4ag 16v dies after warm up
Replies: 1
Views: 2478

Re: 4ag 16v dies after warm up

Try starting here:
viewtopic.php?f=13&t=20653