thats the dream set up , woot with some ITB's

GLWS

looking for this pipe that attaches to the back of thermostat housing

RWD 4AC Not GTS

yeah thats fine as long as its tight and the nut is on more than half

text me 310-892-6260

intrested in block off plate

i have one but its kinda bent. can be fixed tho

lol pm email ill send you a pic

those T3 Plates are for Coilovers(2.5in Spring), if you still have Trd, Lowering or stock Springs,
yes use stock upper spring perch. But you should be fine.

i know the Tein Camber plate came with a 5mm spacer

Camber plate
*5mm spacer
Oem Spring Perch
then Spring

your fine use what you got, i ran OReilly brand for a couple of yrs no problems

NEW steering parts are always a good idea

GL

TIP:
before you remove your outter tie rod, mark the threads with a white/Yellow marker
so that install you can put them in the same spot as before,

Buy A New only not worth buying a used unit! unless its proven in front of you

best bang for your buck
http://www.weirperformance.com/finaldrivegears.html

Toyota OEM Units are $700+

GL

Battlegarage also sell just the rear

Yes it's the same one,

It a Jblood replica, made by VIS

group A is dealer for them

yeah dope concept!

IF any one is looking for dogbox for some reason need you can run a FC3S trans mounting plate to 4ag block
so you can mount FC3S trans. because they sell bolt on Dogbox trans for FC3S
taka ran this set but way back on the Falken AE86 4ag turbo

hit up GroupA Motoring they can get you this Bumper is 7/10 but its pretty cheap

3/4th of the shaft goes in

Been awhile last time I seen one of these for sale!

OG headers forsure

http://www.rockauto.com/en/catalog/toyo ... d+end,7428

RWD MAS T2243

SWeet !

Thanks for the Heads up!

if your looking for stock , Magnaflow 2.5 muffler have a shop make piping sound great and quiet , but loud when you get on it

looking for a good pair of Zenki(without the trim) oem front fenders as long as the fender hasn't been
flared out thats all im looking for its ok if it has dents or bends

looking to pick up in Socal,

i think i have a spare GTS plate LMK if your intrested

those part Numbers are for the OIL PAN RETURN BANJO fitting, Not for engine
oil Squirters,

if you look them up in the USA you have to tell them 91 Corolla, Not 84-87 corolla!
oil squirters are in high comp. Blocks, they only come in AE92 GTS corolla 90-91 in the USA

Hey rogue!

**Update on pistons**
Motor still running on those DNJ pistons I picked up. Been 2yrs. Wished I WPC treated them tho!
Haha

Nice write up!

Go with OEM 4AGZE head,Block, Crank, Rods and pistons std. Or 0.5 OS you be able to put down 250hp with ARP all bolts!! It will hold just don't over boost it For Turbo step up, there is not bolt on kit, everything will have to be hand picked part by part, In the end, what do you want , a sick one of...

Where you located??

Looks good!!!!

Is it that black levin hood?? I saw that before awhile back

.

...Emailed!

You can get these brand new at most local auto parts shops or online for cheap

Look up Aisin WPT-072 water pump it's what your looking for

....Man RIP sorry for your lost