I have a 4age 20V which is leaking oil past the oil cap. I replaced the cap with an oem cap assy (with gasket) but still it leaks a bit. Is this a common problem? And how can i solve this? As the cap uses a gasket, unless there is damage to the sealing surfaces, you should not get any leakage. Howe...

Hi,

The dizzy is okay i've already changed that. It's defenitely coming from the oil cap. It's on top of the plug wires and cam covers. It's nothing big but it's there

Hi,

i have a 4age 20V which is leaking oil past the oil cap. I replaced the cap with an oem cap assy (with gasket) but still it leaks a bit. Is this a common problem? And how can i solve this?

Thanks!

Hi, i opened up the radiator cap and let it run for about 15 minutes, but there's absoluely no air in it. The car smelles like crazy when someone drives behind me. I'm really out of ideas and it's getting really annoying to have a fresh rebuilt engine that won't run properly. I'm suspecting the fuel...

i will be running 120mm stacks, planning on buying those T3 air filters, but im looking for alternatives. That should be a good length for torque! I'd also say measure the resistance of the oil control valve and do a complete checkup of the distributor cap, rotor, plugs, plug wires, etc. Plug wires...

There are about 3 topics over the IAT here on club4ag in the past week.

You can use almost any IAT used on the Toyota from 1990-2000 or so. Just check over here which one you can use: http://www.toyodiy.com/parts/xref?v=E_1 ... 2010&mU=on

Up + lower price: €100,- firm!

Please like said, look over here: http://www.toyodiy.com/parts/xref?v=E_1 ... 2010&mU=on

It's litteraly used in 30 or more models, so there should be one near you for sure. Every breaker that has a japan car should have one.

Hi, My 4age 20V Blacktop has a little problem. After i let it idle for a minute or so it's starting to idle pretty rough. Also sometimes on accelerating it's hesitating, especially in lower rpm, in high rpm i don't have a problem at all. It's not always there, but sometimes when i accelerate in 1st ...

I think you mean these: http://www.mrpltd.co.nz/browse/118_250/ ... ncers.html

Stacks could kill torque a lot, depending also on the lenght of the stacks.

the ST & BT TPS's are different but the ST works just fine with the BT, save your money for something else. the BT is just missing the IDL wire, iirc its taken care of with the MAP sensor or something like that. as for timing, in diagnostic mode, it should be around 16 degrees BTDC, 10 when not...

You can use the iat of a lot toyota's! 100% sure a 7afe iat will fit! Beter check toyodiy to check which will fit.

Very rare new and genuine air filter kit originally designed for the 4A-GE 20V Levin AE111 but can be used on a lot of cars. The diameter of the pipe is 80mm and it has a hole for an IAT sensor comes with: 1) OEM box and packaging 1) New Apexi air filter 2) New Apexi intake pip with a hole for the i...

Is it for a 16V or 20V?

Don't need it anymore? Didn't recieved a reply to my email yet

If you don't need it anymore please close this topic.

ECU is shipped!

Hi,

I have both ecu's available.

$200 for the 5 speed including insured shipping and $250 for the 6 speed.

Just let me know if you're interested.

emailed you

And a 9700 RPM limit? For what specs was it designed for? Doesn't seem to be suitable for a bone stock 20V?!

I'm running AE101 block w. my 16v small port head (NA setup) . It's non interference. I have no idea what my compression rate is though. Blacktop blocks on the other hand, turn it into an interference motor when mated w. 16v. Aka if your belt snaps= dented valves. Blacktop is always an interference...

I wouldn't use a sc12 for trackdays either. Turbo is indeed 'easy' and the stock engine can handle a lot of power.

Could a bad vsv evap sensor also cause such problems? Someone tipped me bout that

It shouldn't but if the valve a bit sticky i thought it might cause troubles...but that isn't true?

Couldn't it be the iscv? I have also problems like that and i'm suspecting the iscv. I didn't try to disconnect the vvt sensor yet.

I think its the iscv or the temp sensor. When i measure the temp sensor its okay though.

Haha no don't be afraid. This was with my 7AFE sensor. You're getting a brand new OEM O2 sensor for the 20V.

Shipped!

Thanks for the quick payment!

Reserved for "Phanist"

Pm'd