Search found 129 matches

by UNLIMITED 86
Fri May 10, 2019 12:45 pm
Forum: TECH: 4A-GE ENGINE
Topic: Rough edges around combustion chambers
Replies: 13
Views: 11947

Re: Rough edges around combustion chambers

Im with OST on this one. I wouldn't use a dremel either. You dont need/want to remove much material. Like you said, you just want to eliminate potential hot spots and it doesn't take a lot to remove those high points around the edges. If your dad's an ex machinist, tell him you just want to deburr t...
by UNLIMITED 86
Fri May 10, 2019 4:33 am
Forum: TECH: Corolla AE86
Topic: Front suspension question
Replies: 10
Views: 9826

Re: Front suspension question

This actually law exists? This is worse than California, which I didn't believe was possible! Several parts of this sound super subjective as well. How is it conducted, by a random person? What's the pass/fail criteria, whatever 'random person' feels is acceptable at any given time? What if that per...
by UNLIMITED 86
Thu May 09, 2019 4:34 pm
Forum: Fun Talk
Topic: Smog exemption???
Replies: 13
Views: 20714

Re: Smog exemption???

I encourage everyone who is interested in this topic to read the actual laws for themselves. Understand what they actually say and how they say it. If youre a car enthusiast is California, this will only help you avoid paying unnecessary fines in the long run. Trust me, i bet ive paid more in fines ...
by UNLIMITED 86
Thu May 09, 2019 4:15 pm
Forum: Fun Talk
Topic: Smog exemption???
Replies: 13
Views: 20714

Re: Smog exemption???

I believe the new exhaust law repeal was successful. Some of you have heard how loud my car is and you also know how many F#@%$ I give/gave. And I've heard that CHP actually has/uses DB meters to cite people for loud exhaust but your city police/sherriff do not (yet). A cops job is to protect and se...
by UNLIMITED 86
Wed May 08, 2019 3:18 am
Forum: Fun Talk
Topic: Smog exemption???
Replies: 13
Views: 20714

Re: Smog exemption???

Unfortunately, you'd still get a ref ticket for removing the EGR even if you were smog exempt (and probably have to pay a hefty fined). The only difference is you would'nt have to worry about it to renew registration every other year but... The BAR has a service that helps people with older cars loc...
by UNLIMITED 86
Tue May 07, 2019 5:20 pm
Forum: Fun Talk
Topic: Smog exemption???
Replies: 13
Views: 20714

Re: Smog exemption???

I highly doubt California will ever change the exempt status to include anything post-1975 and here's why: In 1984, the Smog Check program began in California. Cars made in 1966 and later had to pass the idle test and visual inspection every 2 years. Then, in 1998, the laws were changed, which grant...
by UNLIMITED 86
Tue May 07, 2019 1:01 pm
Forum: TECH: Corolla AE86
Topic: HPI oil cooler instructions
Replies: 3
Views: 4557

Re: HPI oil cooler instructions

You dont need instructions unless it has mounting hardware. Even then, it should have pictures. In general, inlet and outlet sides don't matter as much as fitting orientation. Avoid mounting it with the fittings below the core as it will likely cause only a portion of the cooler to work (gravity alw...
by UNLIMITED 86
Sun Apr 28, 2019 7:12 pm
Forum: TECH: Corolla AE86
Topic: Rebuilding/remanufacturing racks
Replies: 12
Views: 11978

Re: Rebuilding/remanufacturing racks

Usually the tie rods are the only thing that need to be replaced unless it was submerged in water for a period of time. The "seal" you're referring is just a dust cover (you can replace that easily without rebuild if it bothers you). The only reason youd need to full rebuild is if the pini...
by UNLIMITED 86
Sat Apr 27, 2019 9:36 am
Forum: Want to BUY (seeking sellers)
Topic: WTB: Side Mouldings
Replies: 1
Views: 2521

Re: WTB: Side Mouldings

I might have a set but im in the middle of moving right now. Hit me up next weekend and i will check.
by UNLIMITED 86
Sat Apr 20, 2019 8:30 pm
Forum: Fun Talk
Topic: Toyota Fest June 1, 2019 Who’s Going?
Replies: 2
Views: 9223

Re: Toyota Fest June 1, 2019 Can I hitch a ride?

That's a long drive, bruh.
by UNLIMITED 86
Tue Apr 16, 2019 5:36 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB TRUST DD EXHAUST
Replies: 4
Views: 5606

Re: WTB TRUST DD EXHAUST

Texted you the link to the DD exhaust
by UNLIMITED 86
Sun Apr 14, 2019 2:45 pm
Forum: TECH: 4A-GE ENGINE
Topic: ITB's, Coilpack, Haltech ECU installation for 16v
Replies: 23
Views: 21968

Re: ITB's, Coilpack, Haltech ECU installation for 16v

I'm not a shop (yet) but I can make you a harness if you're really interested. My Corolla is currently running an SDS standalone on a 16v HighComp with 20v ITBs. I made my harness to be 100% backwards compatible meaning, I can drop my stock engine and harness into my car without any extra work. Wher...
by UNLIMITED 86
Sun Apr 14, 2019 2:32 pm
Forum: TECH: 4A-GE ENGINE
Topic: Looking to build: 4age vs. 5age vs. 7age
Replies: 12
Views: 14091

Re: Looking to build: 4age vs. 5age vs. 7age

First, respect for wanting to build an A-series! Everyone wants to do a swap these days so as a self-proclaimed purist, this gives me hope!

What else do you have done to your car?
Does your state have smog laws?
Which grades of gasoline are sold in your area?
by UNLIMITED 86
Fri Apr 12, 2019 1:41 am
Forum: TECH: Corolla AE86
Topic: USDM AE86 TACH
Replies: 13
Views: 14235

Re: USDM AE86 TACH

It's likely similar in operation but my guess is that the MSD parts are potted into place to prevent failure from vibration (hence the box shape with flying leads).
by UNLIMITED 86
Mon Apr 08, 2019 11:00 am
Forum: TECH: Corolla AE86
Topic: USDM AE86 TACH
Replies: 13
Views: 14235

Re: USDM AE86 TACH

With the MSD ignition, you will probably need a tach adapter to get either tach to work.
by UNLIMITED 86
Mon Apr 08, 2019 10:56 am
Forum: TECH: Corolla AE86
Topic: Seat woes
Replies: 7
Views: 7457

Re: Seat woes

I used a Wedge bracket with Recaro siders for my Bride Stradia II (Bride brackets were special order with 8-week lead time).

My setup positions the seat in the lowest possible position. Im considering ordering the Bride bracket cuz it raises the seat about 1/2 inch (I'm short, lol).
by UNLIMITED 86
Thu Apr 04, 2019 9:35 pm
Forum: General Accessories and Parts
Topic: Trd horn button and trd oil cap
Replies: 1
Views: 9145

Re: Trd horn button and trd oil cap

Emailed you
by UNLIMITED 86
Sun Mar 31, 2019 4:29 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE Injectors Not Firing
Replies: 108
Views: 87642

Re: 4AGZE Injectors Not Firing

The odds are low, but the problem could actually be the crimp in jondee86's photo or pin/plug connectors. I had increase resistance at a brass crimp where several sensor wires tee'd into a common ground wire. That is why I commented on solidering these 30 year wire joints. You have to check every w...
by UNLIMITED 86
Tue Mar 26, 2019 12:08 am
Forum: Want to BUY (seeking sellers)
Topic: sold
Replies: 5
Views: 5289

Re: WTT:Kouki bumper to Zenki bumper

Sent you a PM
by UNLIMITED 86
Sun Mar 17, 2019 9:28 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE Injectors Not Firing
Replies: 108
Views: 87642

Re: 4AGZE Injectors Not Firing

Hi Unlimited86, I have acknowledged the suggestions and advice. I have tried all of the suggestions and I have come back to the same problem, of having 12v on my earth on injector no1. I have tested the output of the resistor pack, I have disconnected all injector clips and tested the voltage indiv...
by UNLIMITED 86
Fri Mar 15, 2019 10:03 pm
Forum: TECH: Corolla AE86
Topic: RHD Guage Cluster troubles
Replies: 1
Views: 3159

Re: RHD Guage Cluster troubles

What's the trouble? Ive never done this but it cant be too difficult.
by UNLIMITED 86
Fri Mar 15, 2019 9:59 pm
Forum: TECH: Corolla AE86
Topic: Dirty dirty curse words. Water pump, and tvis woes.
Replies: 7
Views: 6394

Re: Dirty dirty curse words. Water pump, and tvis woes.

The VSV should NOT hold pressure but should hold vacuum (either port). http://turbomr2.com/MR2/Reference/TVIS/TVIS-05.gif http://www.turbomr2.com/MR2/Reference/TVIS/TVIS-06.gif Port E (actuator) is never actually sealed. It is either open to atmosphere or connected to port F. Port E will only hold ...
by UNLIMITED 86
Fri Mar 15, 2019 12:54 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE Injectors Not Firing
Replies: 108
Views: 87642

Re: 4AGZE Injectors Not Firing

I see many good suggestions have been made but you dont even acknowledge doing/trying any of them, or provide results. Since you're 'hopeless' with electrical (your words), chances are you're overlooking the problem, which likely has a very simple solution (like a loose ground connection). When trou...
by UNLIMITED 86
Thu Mar 14, 2019 11:42 pm
Forum: TECH: Corolla AE86
Topic: Dirty dirty curse words. Water pump, and tvis woes.
Replies: 7
Views: 6394

Re: Dirty dirty curse words. Water pump, and tvis woes.

The VSV should NOT hold pressure but should hold vacuum (either port).

I suggest making sure the VSV filter isn't obstructed, the acummulator tank isnt damaged (holds vacuum), and inspect all the vacuum lines to/from make sure they are secured properly (fit snug, not loose).
by UNLIMITED 86
Wed Mar 13, 2019 9:15 pm
Forum: Want to BUY (seeking sellers)
Topic: WANTED: AE86 parts (UPDATED)
Replies: 10
Views: 10922

Re: WANTED: AE86 parts (UPDATED)

List is up to date. Still looking...
by UNLIMITED 86
Wed Mar 13, 2019 5:20 am
Forum: TECH: 4A-GE ENGINE
Topic: Tvis cleaning/function
Replies: 3
Views: 4129

Re: Tvis cleaning/function

Get some Seafoam (or Motul if you're a baller) and draw it through the throttle body. If your TVIS butterflies are sticking, this should help free them up without having to take anything apart.

Also, Jondee had some good advice about checking the vacuum lines. Check your water pump post.
by UNLIMITED 86
Wed Mar 13, 2019 5:16 am
Forum: TECH: Corolla FWD / MR2
Topic: Alternator Preference
Replies: 4
Views: 11231

Re: Alternator Preference

Just rebuild the original...
by UNLIMITED 86
Wed Mar 13, 2019 5:10 am
Forum: TECH: Corolla AE86
Topic: Dirty dirty curse words. Water pump, and tvis woes.
Replies: 7
Views: 6394

Re: Dirty dirty curse words. Water pump, and tvis woes.

Sounds like you're using a FWD pump with a RWD water pump pulley. NOTE: DO NOT use the mechanical fan with a FWD pump unless you feel like being stranded! RWD water pumps were designed to support the original mechanical cooling fan so they have a larger bearing, which makes them slightly longer than...
by UNLIMITED 86
Wed Mar 06, 2019 6:50 am
Forum: Fun Talk
Topic: Reps or real?
Replies: 2
Views: 9405

Re: Reps or real?

They look like Work Equip03s that someone was in the process of refinishing or they're just really dirty.