I remember this guy, Mike Drexel, from the fb page. im under-exaggerating when I say he over-exaggerates on everything.

for now im going to set it up and keep it powered by the cig lighter. if it works well, I think I want to wire in another 12v outlet, and keep it hidden in the glovebox where the controls will be. I have been looking, not very hard, for the oem idle-up to see if I can get something to work with that.

it certainly is. I lied, because I forgot. I have this little side project going as well. im tired of fogged up windows, and having a heater core with a 20v swap sucks. saw n article years ago about someone modding a standard home space heater to fit in place of the core. now that Im tired of either...

thanks guys. last post for the year most likely, probably for a while. time to cover her up and wait the winter out. no time or funds after this purchase...Brave! arrived today

Must be oem black...no painted stuff
Need shipped to NJ

Need drivers side A-Pillar & shifter surround

No cracks or major damage, please provide pics.
Thank you

location?
...since shipping glass sucks

theres plenty of write-ups & videos around, just google it. probably some on here, theres definitely one on the old forum archive

yes, if you swap to all BT electronics.
ecu, map sensor, iat sensor, BT engine harness merged with 86 harness(see wiring section or buy one)

...and thanks

they mount below the c-pillar, and the rear side cards will cover them once installed.
a quick google of "ae86 seatbelt" gave me a pic

its not the switch that's the problem, im assuming you mean USDM to JDM signals. IF that's the case, its the wiring that needs to be done, the switch wont do anything for you. google the conversion, theres plenty of write-ups around

-$50 picked up in north NJ, shipping via paypal available -spring rate is around 4-4.5kg iirc, I forget but you can try searching the p/n. -cut about 1.5 coils, pic shows how my car sits on 15x8/0 offset and 195/50R15's with sw20 front inserts and advanced strut tube spacers from T3. -these fit on s...

^this guy knows whats up

another night under the cover of darkness... http://s5.postimg.org/qgsz5v3lz/IMG_4988.jpg image hosting services spent under 2 hours installing the front suspension, putting the hubs back on, and swapping out the rear springs. (15 minutes looking for lost camber plate bolts included. I love when thi...

pretty self explanatory whats going on here, been burning the midnight oil a bit the past week. almost there... http://s5.postimg.org/rg0wilp8n/IMG_4897.jpg http://s5.postimg.org/79xejptl3/IMG_4905.jpg http://s5.postimg.org/tzwjcpcsn/IMG_4942.jpg http://s5.postimg.org/cnw6r9jbb/IMG_4943.jpg http://s...

consider a sheet metal hole punch, and make new holes to line up with the bumper nuts/holes. hand held tool is only around $20 and comes in handy

this was last years 86 only cruise, you wont be disappointed

just scheduled the 2015 Old School Toyota Cruise, for those who missed it last year and want to attend. theres a thread in the Events page here, and this is the fb event page.
https://www.facebook.com/events/1616692018594392/

9/8/2015 Sunday were meeting and driving up to Harriman State Park NY thru the mountains for a cruise. see the details here...
https://www.facebook.com/events/1616692018594392/

if youre in the area, try to stop by

^but it says at the bottom "...using Taptalk" lol

heres a few shots from the mountains I frequent in NY.

finally have my new suspension in the works. sent in my strut casings to T3 last week, set to arrive there today for credit. plan to buy the weld on kit with approx. 6.8Kg springs for the front to mate with these 5.1Kg TRD springs I snatched up new. that's a 15% softer rate than the popular 8Kg/6Kg ...

for the oil pressure problem-are you using the old sensor from the 16v OR the 20v sensor? the 20v sensor will not work with the cluster, its a "dummy light' not a gauge. the tach problem-the stock tack will work fine using the 20v igniter, when wired up properly. you need the 20v coil and ignit...

Any time. The lenses were very clean, minimal sanding done and i left the lettering. I have another jdm set i might do that to.

Meguirs plastic polish. in the 2nd pic you can se the bottle. I masked off everything but the lenses as you see, then used some 800 grit paper to smooth it out, then a finer grit, followed by the plastic polish and a clean rag...aka a tshirt I cut up for just this stuff.

finally painted and installed my jdm zenki rear bumper. http://s5.postimg.org/a5n66wpvr/IMG_4656.jpg http://s5.postimg.org/9cakeajuv/IMG_4651.jpg http://s5.postimg.org/z6kd42juv/IMG_4650.jpg used a Swangbiz bar http://s5.postimg.org/idkie5sef/IMG_4646.jpg now the rear matches the front. http://s5.po...

the 2 rear holes, then the 2 in the fender wells at the front most corners, then one on each side below where the rear side markers would be. 6 in total

I never had the oem mounts, but the bar is solid. thinking about adding extra mounts since it only utilizes 2 top holes, not all 8. I have some plans for the future with it. the best part was the fitment, do messing around tweaking things. bolt up and go.

been a long time since an update, lifes been hectic to say the least. I have done little things here and there, but nothing major. BUT I decided it was time for this to go... http://s5.postimg.org/79056mk1z/IMG_4654.jpg so I broke out the supplies, and got cracking at 7am while the kids slept http:/...

Very nice! Brackets look good, and youre so right on the thick metal, so much easier.