CloudStrife wrote:Are those new BSVs??

Yessir!

Can anyone tell me why this is happening: http://i64.tinypic.com/2qjvtc5.jpg Kind of a random question, but how long are those two bolts? Holding the plate onto the head? I have a bad coolant leak back there, and I don't think they've ever been taken off before so I'm anticipating on them snapping....

Joe4ag wrote:I have one.Text me at 484-681-2619

I think I may've located one, but if my seller falls through or otherwise, I'll hit you up.

Thanks all!

MisterJerk wrote:you got a JDM one. those sensors are on the front water neck on USDM models.

The temptation to trade is real. Just to clean the wires up at the front of the engine. I already deleted the EGR

Haha, I'd totally be interested in a trade if you give into that temptation. Thanks Mr Jerk!

Looking for this guy:



Motivated buyer. Thank you C4A!

aukword1 wrote:That is definitely it. Be careful with the vacuum things, they can break pretty easily when pulling the engine in and out.

Auh man, Thank you so much!

Now I gotta track one of those down *posts to 'Wanting to Buy' section*

Thanks Cloud

This is lookin' like the rear outlet I'd need:


(Pulled from the forums here http://club4ag.com/forums/viewtopic.php?t=7099&start=30)

Can anyone confirm?

More engine progress. I think she's ready to be installed. Still got a couple things to do on the engine, but as it is now, I don't see why it can't be put into the car. Added the intake manifold / throttle body / TVIS plate, Oil Pan, Coolant Plumbing / Water Pump, Disty, Engine Mounts, EGR, Rear Ma...

Can anyone tell me why this is happening: http://i64.tinypic.com/2qjvtc5.jpg I thought I had the right rear outlet from the cooling guide (https://www.rollaclub.com/board/topic/19896-golberg%E2%80%99s-4age-16v-cooling-guide/), but the damn thing gets in the way of the EGR pipe. Please don't tell me ...

Good morning C4A, Selling a 4AGE 7-rib Bigport. This was pulled from a 1989 Corolla GTS AE92. $300 (I may also be willing to trade for anything useful to my AE86 build). local pickup only (I'm located in Chico CA). Mostly complete, only missing the plastic cam pulley cover. I have the passenger side...

installed and running yet? Not yet unfortunately. I'm kinda waiting on my buddy cause his shop is much more equipped to handle installing engines. He's been busy from the holidays. I still have a handful of things I need to do upon install, specifically: -Wiring up an inline electrical fuel pump (I...

More Updates on the Build: The Head, Oil Pump, Crank Pulley, Cams and Timing Belt and a couple other things mounted up: http://i64.tinypic.com/295x3bo.jpg http://i67.tinypic.com/6ivb6q.jpg http://i66.tinypic.com/9q9sus.jpg There's a couple of gaskets and o-rings I totally forgot, so I got em on ord...

How the hell do you have so much fender gap on the fronts? This was mine @ purchase with factory suspension: https://s6.postimg.org/i4d4fhku9/Message_1476985669965.jpg Factory springs sag, but not that much, plus you have lowering springs??? There's no 400+ lb engine / transmission in the front wei...

More Updates: 2.25" Ebay Catback: http://i68.tinypic.com/df8w7n.jpg http://i68.tinypic.com/n19p4l.jpg http://i66.tinypic.com/nbusuw.jpg And this beauty (as of Yesterday 12/11) (Note those Arias High-Comp Pistons): http://i64.tinypic.com/2q0okfn.jpg http://i63.tinypic.com/2j1wj89.jpg http://i66...

there is no engine fan, mechanical driven or electric, has made me a bit uncomfortable. David (previous owner) said it wasn't a problem, after all this is a race car , it is used on track........ As this car's purpose has changed somewhat, besides the bits I've already mentioned, I'll be adding a t...

I think the club is just seeing a change at the moment, but i believe in the near future C4AG will see a return but in a different way. The reason i say this is because the 86 is stepping into "classic car" territory, just like many cult cars before it, like the bmw 2002, datsun 510, rx3,...

Sorry for lack of updates, life sometimes happens where you gotta put things on the backburner for a bit, but I'm keeping the girl around and I've gotten back to a point where I can re-prioritize the Eight Six again. One major thing that happened causing the delay; I purchased a new home, with... *d...

As old as these 4AGE engines are, you would be lucky to get a good short block from a pick and pull. I would look at getting the crank turned [probably $90] that way you know you have a good bottom end. Do not but bearings until to get the crank back from the machine shop. Dave W That's the route I...

Finally opened up the 4AGE for the rebuild and my worst fears were made into reality. The block has spun bearings, which explains why the MR2 donor was at the Pick n Pull. The aforementioned MR2 I pulled it from had some front end damage, so I was hopeful that that was the reason it was donated by t...

scalpel wrote:While on the subject of bumpers

Is there a good kouki replica oem bumper?

The million dollar question right there...

GTS Throttle Cable and Kouki Headlight Harness install. Seems the guy who sold me my dash and engine harness sold me a zenki dash and kouki engine. So now I get to find another dash harness and do that job all over again. yay. http://i65.tinypic.com/209mvcj.jpg http://i64.tinypic.com/2d6p28i.jpg htt...

Well I don't know much about kouki harnesses as mine are zenki. Here is a pic of my zenki plug that is in question about the center black wire. It has it on both sides. The first 2 pics show this. Hard to see the middle wire in the second pic but it's there. Also here is a pic (3rd pic down) I foun...

Hey guys, I really need your guys help putting this to bed. I'm working on swapping out my harnesses and I've come to the conclusion that some of my harnesses are incompatible (Aka, I have some Zenki and some Kouki), but I cannot tell which is which. I really need a solid answer on this. Here's what...

I was able to pull a 4AGE out of an MR2 all by my lonesome in about 4 hours. It seems intimidating at first, but once you get going, it becomes a pretty easy task.

Is there a difference between the AE86 SR5 and AE86 GTS head light harnesses? Those seem pretty difficult to track down so I am hoping to keep what I got and just do the other harnesses. Thanks! Iirc its mainly the longer wiring for the alternator thats different. You'll have to check the wiring di...

Still looking for the headlight harness. Thanks C4AG.

Whoever said you can't have Christmas in April? Got some lovely things in the mail over the last 3 days. Mostly to rebuild the 4AGE and mount it to the transmission, but other fun stuff as well. http://i63.tinypic.com/2s7zwiv.jpg http://i68.tinypic.com/2zso4yq.jpg Parts worth noting: -4AGE 16V Toyot...

Manual Rack Swap done. With minor hiccups (Details below). Degreasing the Bay and Removal of the power rack: http://i68.tinypic.com/v7fw2d.jpg http://i67.tinypic.com/6hnkmp.jpg No job is ever done without some sort of setback. I spent the better part of two hours trying to separate the outer tie rod...

Maybe Kouki and Zenki headlight harnesses are the same? In which case, WTB either one. Unless it's fairly easy to make my SR5 harness work? Needed for my AE86 GTS build. Hoping to find a seller willing to ship to my address in Nor Cal, on my dollar. Please reply here, PM me, or shoot me a text: Five...

I've located what I need. Thank you again Club4AG.