Very cool glad I came back to club4ag for a visit My 5AGZE has been running for awhile, this is what the 83mm Wiseco pistons look like (the left piston is a 83mm HKS) http://img.photobucket.com/albums/v624/Davegt27/5AG/5agpistons004.jpg I picked up a 20V head so I might be following your foot steps ...

at the wheel ?

edit:
https://www.youtube.com/watch?v=OkvPFol1ges

I have a TRD intake Cam I want to sell at great price $250 buyer pays shipping Camshaft, intake 13501-AE811 Ｃ 1 Discontinued Angle 320° Lifting 10.0mm Need to change to inner shim type has a little Dykem on them but comes off easily http://img.photobucket.com/albums/v624/Davegt27/for%20sale/TRD811bi...

I have a TRD intake Cam I want to sell at great price $250 buyer pays shipping Camshaft, intake 13501-AE811 Ｃ 1 Discontinued Angle 320° Lifting 10.0mm Need to change to inner shim type has a little Dykem on them but comes off easily http://img.photobucket.com/albums/v624/Davegt27/for%20sale/TRD811ca...

TRD CAM 304 deg 7.5mm lift

Camshaft, intake 13501-AE851 Ｃ 1 Discontinued Angle 304° Lifting 7.5mm

http://www.trdparts.jp/english/parts_engine-4a-g16.html


HTH

they don't have a brand name that I can see got them off Yahoo Japan

these are still for sale

MR2 ECU $25 http://img.photobucket.com/albums/v624/Davegt27/for%20sale/4AGECU2_zpscef9d143.jpg http://img.photobucket.com/albums/v624/Davegt27/for%20sale/4AGECU1_zps7222bcfb.jpg 4AG Cam Gears $120 for both http://img.photobucket.com/albums/v624/Davegt27/for%20sale/4AGCAMgears_zpsddce6ee1.jpg http://...

dcnazario wrote:so im running a stock 4age redtop in my coupe...my question is

can i use an apexi v-afc with my stock ecu?

just looking for a simple solution if possible.

thanks for the view or advice!

Nope V-AFC is for a Honda
if you have a japan spec Small port you can use a SAFC

hth

ok I been searching the net since 9pm its 2:40am now

wondering when you guys did your 20V swap did you incorporate the test connector?

is the test connector fully functional?

does you check engine light work?

and lastly did you hook up the speed sensor?

You definitely should change the pistons, while the 5AGE only has 4 cutouts (from my memory) and the 20V has 5 cutouts in the pistons. What block do people use on a 5age? on AE101 block with 16v heads, normal silvertop pistons are fine. Its a long story but I bought a 101GZE that turned out to be b...

the only way to get power out of a small 1.6 motor is to rev it so I think you will be disappointed in the performance (for a daily driver)

maybe a Beams 3sg would be and idea

found it

http://www.mr2oc.com/showthread.php?t=146563&page=5

thanks for the info

Is 20V motor interference or non-Interference something I have been wondering about for some time?

I have a 5AGZE and it would be neat if I could slap a 20V head on it that is if I did not have to change pistons


Any thoughts could it be done

I don't think so get some GZ pistons you would be set (oh GZ pistons are the stock super charged pistons)

Take the short block to the machine shop explain to him what you want give him the piston pn's so he can order them for you


HTH's

First get a book for your car If you’re going to go that deep you might as well rebuild the motor I would just pull the pan make sure there is no metal in the pan Make sure it rotates freely check the thrust bearing play if that is all good I would call it good Any more then this you might as well r...

Idle speed control valve


http://www.mr2oc.com/showthread.php?t=4 ... light=iscv


On the top photo those are water line connection for the ISCV

1) to know how much you can machine the block deck... 2) to properly calculate compression ratio (what if buyer uses thinner head gasket... and/or cuts the head to reduce chamber volume... how will he know the new compression ratio if he doesn't have these specifications I see all that information ...

Yes 82 mm bore it has all the paper work (spec sheet)

What is the comp height? Bore is 82mm, also what is the dome volume?

Why do want to know this?





David

Sorry for the late reply yes the pistons come with pins and rings For best power the pistons will come up above deck to best control piston squish Wt. of piston #1 is 290.22 lock = 1.47 pin = 75.83 ring 21.93 Top ring is 1mm 2nd is 1.2mm oil is 2.8mm If you can find some better ones for this price l...

http://trdparts.jp/english/list_ae101.html

http://www.trdparts.jp/parts_engine-4a-g20.html


http://trdparts.jp/english/list_ae111.html

http://trdparts.jp/english/parts_clutch.html


HTH
davegt27

still for sale

I bought a set of trick pistons off Yahoo Japan when I got the pistons I sent one to Wiseco with the request "make some like these" This is what I received, I bought two sets so the other set is in my race motor New 82MM forged Wiseco Pistons CR 10.5 to 1 weight 289.7 to 290.3 grams (compl...

pretty good deal for a ported head and oil-squirter block

If I had a job I would be all over this

Toyoloog wrote:It does nog work for the 4agze or 20V. I'm still trying to find out if it will work for the smallport engine.

Yes it will work with a small port

It’s designed to work with MAP sensor

I have one from a GZE 101

I could head to my storage unit and take some pics


David

dasgtnut27@aol.com

Also you can try blocking off a part of the throttle bodies

This is to try and increase intake port velocity

Do you have the stock intake trumpets in place?

Very cool build So the Beams 3sg has a front sump oil pan? (I am asking for my Opel GT) Also you don't see to many ITB manifolds for a 3SG I saved this pic off yahoo japan http://img.photobucket.com/albums/v624/Davegt27/1140713sgtbset.jpg What kind of ITBs are those? Do you have the link to yahoo J...

Very cool build

So the Beams 3sg has a front sump oil pan? (I am asking for my Opel GT)

Also you don't see to many ITB manifolds for a 3SG

I saved this pic off yahoo japan