Thanks for that info. Will try that setting on our next dyno trip. What valve springs are you using? Do you think the factory ones are adequate for these cams? I don't have hard facts to prove this, but I understand anything larger than 272 you really want to run upgraded valve springs. Also, the f...

I had Pauter make some rods for me.

We actually tried to dial in the cams using degree wheel and dial indicator guage. Our aim was to get both intake and exhaust to 102 degrees. Must confess that we hadn't done degree timing in years so I wont swear we got it right. The cams were some used ones from a previous project so we never had...

RCAs gone, Steering wheel and hub gone, C160 pending.

BUMP, still looking.

Brand/Model: SSR Longchamp XR-4
PCD: 4x114.3
Width/Offset: 14x6+14,14x7+0
Location: Columbus, OH
Willing to Ship: Yes
Price: $850

Currently have no tires.

I was asked in another carb related thread to share the notes I took when I was looking around jotting other jet charts down. I took notes of peoples jet charts that were similar to mine from what I was able to gather going through the multiple pages on the old carb thread. 16v largeport 304/288 8.5...

amaze wrote:Hi, I am currently putting together my 4age with weber 40 dcoe's...they have 32mm chokes right now...is this the suggested size to use?

32mm will do just fine on a stock motor.

I'm interested to see how your jet chart compares to mine. I've been compiling various charts from other people with varying setups and they've all been in the same general area, with a few exceptions. Please SHARE......... I'll share it in the dedicated carb thread, I don't want to de-rail this gu...

Unfortunately, I haven't schedule any dyno time yet. I've primarily done my tuning by the way of street and wideband. My butt dyno tells me the cams fall off mid-late 8k RPM. I should be getting on a chassis dyno here very soon, however. My setup is a little bit more mild than yours, with 11.8:1 com...

I've run them on my VW MK3 GTI and they're great. They come out of the same build house as many other coilovers we're familiar with, like D2, K-sport, BC, etc.

Did you install the outer tie rod above or below the knuckle?

Please, if you don't mind.. find out from the tuner what jets you're running with your setup right now. Very curious. Also, a smaller venturi is something you don't want to do unless you're trying to create a little more torque in the lower RPM range. 36mm is about right for those 272 cams, and I'm ...

A petition will literally get you nowhere.

I was looking for this exact size and offset maybe a month ago... bummer

Located in Columbus, OH Contact me by PM or TEXT at (6one4) 5nine8 - 0five2nine https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/599836_10100174694253617_1755321982_n.jpg Toyota C160 6-speed transmission with roughly 40k miles off the 20v Blacktop I had imported- Has all the sensors, linkages,...

Looking for black driver's side kick panel, or the fuse cover. Also looking for a sunroof panel in the tan/beige color

PMs work, I have cash in hand and would love to take these items off someone's hands.

Thanks in adnvace!

Surprised I haven't seen you around, I'm in the Columbus, OH area. They've been holding bi-weekly practice events at the Columbus Motor Speedway that are a pretty good time.

RuizXIII wrote:You are the only guy who is optimistic about his engine blowing up! Haha
It sucks that it blew up but seems like you are going to make it even cooler next go 'round!
I can only imagine...

I would be if I didn't have to pay for the repairs, too.

I'm in centra Columbus

ttt

Looking for any decent 14" wheel that can be split for bigger lips if necessary!

still searching... had a couple people with some wheels, but nothing came of it.

Driver's side kick panel gone?

Like title states, I'm looking for just about any 14" wheel that can be split and made wider with custom lips.

OR, I'm looking for something around the range of 14x8.5 or 14x9



I have 2 grand in hand I'm looking to spend, let me know what you have!

Thanks in advance!

I love my carbs

A much bigger sense of accomplishment and pride telling everyone I jet and tuned them myself.

Looks similar to the CX racing headers.

Both of those would work just fine, and I have actually used both of those on my own cars. The expansion plug works great and is easy to remove if you decide you might want to go back to FI. The expansion plugs are alittle more more, but also solid and less worry. Pretty much up to you, which route ...

Hey man, figured you were on here... this is BHCfarkas from TCL

Dino, it's Andrew Farkas (@bhcfarkas) hahha... just wanted to say what up! I've been keeping an eye on your build man.

Freeze plugs.

I'm sorry Dr. Tweak, I just don't find those Dakota gauges attractive at any price point.