Search found 485 matches

by aukword1
Fri May 25, 2018 1:28 pm
Forum: Fun Talk
Topic: Hi Guise
Replies: 2
Views: 3998

Re: Hi Guise

a few lurkers here and there. When is the next Artesia meet?
by aukword1
Tue May 15, 2018 2:58 pm
Forum: Want to BUY (seeking sellers)
Topic: Gts caliper
Replies: 1
Views: 2531

Re: Gts caliper

autozone has them supposedly.
by aukword1
Thu May 03, 2018 7:47 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

I don't, if you are asking me. Anyhow, I just finished redoing almost all of my brake lines (minus the rear hardline) and added a hydraulic handbrake. The handbrake is setup independently to the rear wilwoods and I added a reservoir with all new lines. I will take some pictures later. Also, I would ...
by aukword1
Wed May 02, 2018 8:17 am
Forum: TECH: 4A-GE ENGINE
Topic: Code 33, 41, 42
Replies: 5
Views: 7000

Re: Code 33, 41, 42

Did you remove the TPS when you were cleaning the intake manifold? If you did remove the TPS, you have to calibrate it. I'd start by checking for shorts in the wiring or by making sure the contacts are clean. if that all checks out, try checking for vacuum leaks and correct vacuum routing. If all th...
by aukword1
Tue May 01, 2018 7:30 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

Yeah it makes sense to run a longer rod in that situation. I guess you can always make a rod for whatever length you need as well. Glad you got it sorted out!
by aukword1
Mon Apr 30, 2018 7:43 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

Did you have to do anything special to bolt the ae86 slave to the J160? I ground part of the bellhousing away where the 86 slave fluid ports hit, but I guess I didnt grind enough because last time I tried to reinstall one of the ears cracked and broke off. But likewise I dont feel like I am getting...
by aukword1
Thu Apr 26, 2018 12:15 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

lol, no one was really supposed to see that video. I am in the middle of adding a wilwood proportioning valve because the one I had in previously was completely seized. So while I was doing that I decided to also has some hard lines to other set of calipers and install a hydro handbrake for shits an...
by aukword1
Tue Apr 24, 2018 7:13 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps
Replies: 26
Views: 19198

Re: Timing woes and tps'

Thats where you want it. Just leaving the #1 cylinder mark.
by aukword1
Fri Apr 20, 2018 7:08 am
Forum: Want to BUY (seeking sellers)
Topic: Found what I needed. Thanks
Replies: 3
Views: 3457

Re: Front spindle hubs, calipers, and caliper brackets/dust shields.

I'll sell the hubs and brackets/dust shields for $100
by aukword1
Thu Apr 19, 2018 10:09 am
Forum: AE86 Parts & Accessories
Topic: Stuffs for sale
Replies: 11
Views: 16522

Re: Stuffs for sale

bump - added some parts
by aukword1
Thu Apr 19, 2018 10:01 am
Forum: Want to BUY (seeking sellers)
Topic: Found what I needed. Thanks
Replies: 3
Views: 3457

Re: Front spindle hubs, calipers, and caliper brackets/dust shields.

I have the hubs and caliper brackets but I already sold the calipers.
by aukword1
Thu Apr 19, 2018 7:22 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps
Replies: 26
Views: 19198

Re: Timing woes and tps'

I would make sure the crank is actually TDC by removing the 1st cylinder's spark plug and putting something in there like a stick or something. Once the stick reaches the highest point your at TDC. Then check the cams to make sure they line up at that point. If all that is correct then the distribut...
by aukword1
Thu Apr 19, 2018 7:07 am
Forum: Fun Talk
Topic: AE86 Nights SoCal
Replies: 5
Views: 8454

Re: AE86 Nights SoCal

Pretty sure they haven't had one in a while. Your best bet is 86 fest in July at the Auto Club Speedway.
by aukword1
Tue Apr 17, 2018 9:50 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps
Replies: 26
Views: 19198

Re: Timing woes and tps'

I ran lightweight pulleys in my old G35 for like 10 years with no issues. I also ran T3's pulley on my old 4ag motor for a couple years with no issues either. Personally, I don't know anyone who has had any issues running aftermarket pulleys that ran into excessive bearing wear at the crank.
by aukword1
Tue Apr 17, 2018 7:24 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps
Replies: 26
Views: 19198

Re: Timing woes and tps'

water pump pulley wont line up as well since the ae86 water pump is longer. If you are still running acc you should just buy a solid crank pulley from T3 or NST, that way you don't have to mess around with machining current pulleys etc.
by aukword1
Mon Apr 16, 2018 12:28 pm
Forum: TECH: Corolla AE86
Topic: Timing woes and tps
Replies: 26
Views: 19198

Re: Timing woes and tps'

The original 4age crank pulley was a two piece that had some rubber piece holding it together. Pretty sure that rubber piece holding it could be the cause of the slippage. Once that starts happening, you better replace the pulley or it will fly off!
by aukword1
Fri Apr 13, 2018 9:42 am
Forum: TECH: Corolla AE86
Topic: Can anyone tell me the horn wires plug wires?
Replies: 11
Views: 9606

Re: Can anyone tell me the horn wires plug wires?

I'm pretty sure the horn is supposed to be grounded to the chasis right near the plug independently. It's been so long since I removed the oem horn setup so my memory is fuzzy on it. It does look like you have the right wires for it though.
by aukword1
Fri Apr 13, 2018 7:28 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

So this is where I am at now. Having a bit of fitment issues with getting both calipers to line up properly to the rotor. I will have to hit up the hardware store to get some 2 3/4" ID washers to act as spacers and figure out a way to get them both to line up. The quad caliper bracket was desig...
by aukword1
Fri Apr 13, 2018 7:05 am
Forum: TECH: Corolla AE86
Topic: Can anyone tell me the horn wires plug wires?
Replies: 11
Views: 9606

Re: Can anyone tell me the horn wires plug wires?

So I checked mine, It looks like it has a green wire with a red stripe and a white one (I think). I have that part of the harness tucked so its hard to see and the engine bay has been painted several times so I could be wrong.
by aukword1
Thu Apr 12, 2018 7:18 am
Forum: TECH: Corolla AE86
Topic: Can anyone tell me the horn wires plug wires?
Replies: 11
Views: 9606

Re: Can anyone tell me the horn wires plug wires?

My guess would be that the horn isn't being grounded at some point on the wire loom. I can check when I get home what the colors are for you.
by aukword1
Fri Apr 06, 2018 2:47 pm
Forum: TECH: 4A-GE ENGINE
Topic: OST-048: Спасибо товарищ Сталин
Replies: 13
Views: 9987

Re: OST-048: Спасибо товарищ Сталин

lol had to google translate that title. Interested to see how this smallport comes out
by aukword1
Fri Apr 06, 2018 7:15 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

It's the aw11 manual rack. Here are some pics of the progress I made last night. It should be ready to go back in the car tonight. https://s20.postimg.org/mo7yrwmb1/20180405_190934.jpg https://s20.postimg.org/4y6a6v10d/20180405_202223.jpg https://s20.postimg.org/e5yinkni5/20180405_202227.jpg
by aukword1
Thu Apr 05, 2018 1:15 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 89
Views: 92113

Re: Aukword1's Beams Swapped AE86

I know it's been longer than a week but I came across a few issues here and there but most of it is sorted out. So first of all, I just got the differential back today. I didn't have the tools to measure pinion depth so it was cheaper for me to outsource that to a diff shop. If you are in the area, ...
by aukword1
Fri Mar 30, 2018 8:48 am
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 233
Views: 270576

Re: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p

Did you notice a significant different after swapping the LCA's? Second video link isn't working btw. Those events look like they are so much fun!
by aukword1
Thu Mar 29, 2018 7:36 am
Forum: TECH: 4A-GE ENGINE
Topic: draw through turbo 4age!
Replies: 14
Views: 11333

Re: draw through turbo 4age!

It looks pretty interesting. Can't wait to hear what it will sound like. BTW you can use this website to host images on this forum. https://postimg.org There are plenty of websites ppl use just wouldnt recommend using photobucket cause they're assholes.
by aukword1
Wed Mar 28, 2018 3:52 pm
Forum: TECH: 4A-GE ENGINE
Topic: Ignition key source
Replies: 5
Views: 5628

Re: Ignition key source

What are you trying to wire up in the engine bay? I would probably use the EFI main relay but really depends on what you are trying to do.
by aukword1
Tue Mar 27, 2018 11:49 am
Forum: Fun Talk
Topic: what happened to the community
Replies: 77
Views: 69264

Re: what happened to the community

On a lighter side of things, I found out that there is an extension for Chrome that fixes the photobucket link errors. Its called Photobucket hotlink fix and it works great.
by aukword1
Fri Mar 23, 2018 1:41 pm
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 240
Views: 199649

Re: CloudStrife's AE88

Yeah, very easy to do. Unless you are talking about a fwd 20v. That will require some wiring but still not too bad.
by aukword1
Fri Mar 23, 2018 9:01 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 240
Views: 199649

Re: CloudStrife's AE88

Don't give up yet you are very close. I started mine with the same bottom end seizure and been through a lot since then. I'm glad that I didn't give up and get grinding at it. The car with a proper/healthy engine is amazing. Just keep at it!
by aukword1
Tue Mar 20, 2018 11:31 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 173
Views: 166827

Re: notnilc20's 1986 ae86 Hatch build/restoration

looks really good, paint came out nice!