your engine is probably fine. if you never started it then it is probably still covered with all the builders lube. you could probably go with out changing coolant since it was new. you have to understand that fluids usually go bad due to heat. its really no different then sitting in a bottle on the...

I have a bare head i will sell for 50 + shipping if you are interested i can get a shipping quote for you

if you can get it done i would be in for a set or 2

if the case and the mounting points are the same and the input gear shaft is shorter then it is an ae86 style. the aw11 and the ae86 manual racks use the same case. if the mounting points on the case are shorter then the aw11 then it is more likely to be a FWD corolla rack. i made the mistake of get...

try running a separate ground wire the oem wires are not right for hid conversions. mine did the same thing and a quick wire to the chassis did it for me.

check out the diy 4 link thread everything you need is in that thread

if it is back firing then you should check timing base timing and spark timing is where i would start

yea i have to agree it does look good for the first month or so. i did this to a maroon privacy cover and hatch carpet it does look good but i barely touch it and it needs a recoat since the maroon is starting to come through. seats i bet would wear faster and on your cloths too. but it does work tho.

I have a coil for 60 bux shipped. let me know

I have an ae92 thermostat housing and im trying to figure out what thermostat i can use. possible part #'s too? i tried autozone but im not exactly sure what car to say its from. id appreciate it if someone can help thank you. use the ae86 oem one. the thermostats are the same it is the gasket that...

Excellent ga_goosh! Thats exactly what I need..thanks! also i forgot to mention the threads are a little different. the sleeves are 5/8 x 16 and the bushed ends are 5/8 x 18. they will thread in but they are tight So, would it be possible just to use 4 bushing ends instead of the ball joint? http:/...

I got one for 40 shipped lmk

im interested to see how the glazing putty hold up over time, since they do make a specific filler for this, plastic body filler, which can handle a bit more flex than the glaze putty. overall however, it does look nice now. the glaze is a lot better then bondo in durability. i worked at a body sho...

check if the charcoal canister has been removed. if it is missing then that is probably your issue.

what is your measurements say? are you measuring from center to center of the bolts?

Looking to give people good deals on some parts for the holidays. So from christmas till new years ill be having this sale to get out I can ship at buyers expense. 4agze Crank $80 http://i251.photobucket.com/albums/gg286/wolfsae86/IMAG1067.jpg is there any visible wear on this crank? do you know th...

If i were you i would check the pinion angle. that may be why every one else gets so much vibe but it could still be the the stiffness.

I like this. now if i can only find some good condition supra seats.

yes plug them or you might get pressure pushing out fuel through them. remove the charcoal canister and plug the return line that normally went to your fpr.

make this same post on 86garage.com you will get a couple of dallas guys willing to lend you a hand for sure

just get it skimmed and ballanced and throw it on it is all ready lighter then any other stock 4age flywheel

bump

18mm or 20mm wrist pins?

wow free bump for the good prices if i was closer id be at your door with a truck

there used to be a pic with the 3 different types of cam gears floating around the net but i cant seem to find it. it showed the large port the small port and the 20v exhaust cam and there weights. the large port was the heaviest the small port was the b next and the 20v 3 spoke exhaust was the ligh...

the green plug that is in the left side of the pic is the distributor plug so yes that will be the left side of the engine bay near the frame rail

whoops i didnt find it on this sight but it is still up on the old sight
http://forums.club4ag.com/zerothread?id=15662

there was a post by assasin10000 i think it was called quafe steering rack install or something he did a complete rebuild on his rack with step by step instructions with some good pics do a search fro "quafe" and look for assasin's post

Iv seen a brown and tan before but i cant remember if it ever came in the us or not and i dont think it was a gts interior color but brown and tan was available in some form. it was probably an sr5 here is a quick google pic http://img.photobucket.com/albums/v99/scrapperboy/ae86/interior_wreck.jpg