For those who have built a 4a boost or not feel free to chime in. I have built me a 7rib gze bottom end. .5 oversize. With ACL race bearings. Extra oil clearance.
I used moly assembly lube as well.
Any thoughts? Anything to do differently from OEM 4a procedure?
Synthetic or not?
Pre fill the oil pump and filter?
4A-GTE break in procedure.
-
EightSixSpool
- Posts: 6
- Joined: Sat Jul 04, 2015 1:31 pm
Re: 4A-GTE break in procedure.
Oh and also driving technique for the first 5, 20 and 200 miles or so
-
yoshimitsuspeed
- Club4AG MASTER
- Posts: 2084
- Joined: Sun Jan 13, 2013 1:18 pm
- Contact:
Re: 4A-GTE break in procedure.
This is the method I use and believe in.
http://www.mototuneusa.com/break_in_secrets.htm
http://www.mototuneusa.com/break_in_secrets.htm
