How to connect tacho with cop's without igniter?

[Toyo81]

Hi hope some 1 can help
I just install a 1NZ cop's, not sure how to make after market tacho work, without using the igniter. I was using a twin coil pack witch was giving me issues starting the engine, start now with no problem and revs high, but not sure how far is revving, with the old set up was revving to like 8K's. I have a ST with a BT ECU.
Thanks in advance

[burdickjp]

Hi hope some 1 can help
I just install a 1NZ cop's, not sure how to make after market tacho work, without using the igniter. I was using a twin coil pack witch was giving me issues starting the engine, start now with no problem and revs high, but not sure how far is revving, with the old set up was revving to like 8K's. I have a ST with a BT ECU.
Thanks in advance

http://www.msextra.com/doc/ms1extra/MS_Extra_Hardware_Manual.htm#tachoout

[Toyo81]

Hi hope some 1 can help
I just install a 1NZ cop's, not sure how to make after market tacho work, without using the igniter. I was using a twin coil pack witch was giving me issues starting the engine, start now with no problem and revs high, but not sure how far is revving, with the old set up was revving to like 8K's. I have a ST with a BT ECU.
Thanks in advance

http://www.msextra.com/doc/ms1extra/MS_Extra_Hardware_Manual.htm#tachoout

thanks works like a charm. I though is was only for the MS but it works, connected the signal from igt and it works.
Thanks again