16v connecting rod nuts/bolts to 20v

Post Reply
kouki1986
Club4AG Enthusiast
Posts: 131
Joined: Fri Jan 11, 2013 10:31 pm

16v connecting rod nuts/bolts to 20v

Postby kouki1986 » Sat Jan 19, 2013 6:34 pm

Can I use 16v connecting rod nuts & bolts to 20v?
Top
User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: 16v connecting rod nuts/bolts to 20v

Postby HASport AE86 » Mon Jan 21, 2013 11:44 am

I wanna say yes if they are from a 42mm journal size 16v, like a high comp engine or gze crank. It might be the same for the 40mm blue tops. I would check the ARP rod bolt application chart.
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)
Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions
Top
ga_goosh
Club4AG Pro
Posts: 542
Joined: Thu Jan 10, 2013 12:28 pm
Location: Texas

Re: 16v connecting rod nuts/bolts to 20v

Postby ga_goosh » Tue Jan 22, 2013 8:53 am

they are all the same. it doesnt matter if its 16v or 20v they will work
I <3 my AE86

4AG Manual
AE86 FSM
Top
drift warrior fab
Club4AG Enthusiast
Posts: 95
Joined: Sun Jan 27, 2013 6:34 pm

Re: 16v connecting rod nuts/bolts to 20v

Postby drift warrior fab » Mon Feb 04, 2013 9:04 am

in my experience with them. the 16v has a 6 point and the 20v has a 12 point. there the same thread size and pitch. all my 20v ones have been 12 point, and when I opened up a largeport 16v a few weeks ago it had regular 6 point nuts
Top
Post Reply

Return to “TECH: 4A-GE ENGINE”