Late Model 4agze COP coil things

neko-romancer
Club4AG Regular
Posts: 16
Joined: Sun Jan 25, 2015 7:26 am

Late Model 4agze COP coil things

Postby neko-romancer » Tue Mar 31, 2015 2:32 pm

So i pulled the 4agze that was in my 86 to make wiring corrections easier, (because i have pretty big hands and am too tall) and i also plan to clean and paint the bay etc. Anyway while i was hauling the engine to my garage, it leaned on the dolly and broke the old plastic connector going into the one of the coil-packs. Brittle plastic be-damned! My 4agze has the two coil packs mounted on the valve cover, and i have looked all over the internet trying to find a new coil-pack to no avail. Heres what they look like http://forums.club4ag.com/zerothread?cmd=print&id=66131

Does anyone know where you can buy these?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


neko-romancer
Club4AG Regular
Posts: 16
Joined: Sun Jan 25, 2015 7:26 am

Re: Late Model 4agze COP coil things

Postby neko-romancer » Tue Mar 31, 2015 2:35 pm

Just saw that you can use 7mgte coil packs, but can you get them new from anywhere?

User avatar
jondee86
Moderator
Posts: 2655
Joined: Fri Jan 11, 2013 10:21 pm
Location: Wellington, New Zealand

Re: Late Model 4agze COP coil things

Postby jondee86 » Tue Mar 31, 2015 2:48 pm

If Toyota don't have them, you will have to try and hunt down some
used ones... junk yards or JDM engine importers... or try some of
the outfits that specialize in bringing in JDM parts to order. Not so
hard to find down here in NZ....
http://www.trademe.co.nz/motors/car-par ... 144230.htm
... but shipping would be a killer.

Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.

neko-romancer
Club4AG Regular
Posts: 16
Joined: Sun Jan 25, 2015 7:26 am

Re: Late Model 4agze COP coil things

Postby neko-romancer » Tue Mar 31, 2015 5:02 pm

Alright, i guess i'll have to buy some junkyard coils, cause the dealership claims that all 4agze parts are discontinued.
Thanks for the help jondee

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


ditn
Club4AG Enthusiast
Posts: 192
Joined: Sat Jan 12, 2013 7:34 am

Re: Late Model 4agze COP coil things

Postby ditn » Sun Apr 19, 2015 1:30 am

If only 1 is broken i think i have a spare one i can sell to you.
its the coilpack itself but only 1 they are placed 1 left and 1 right but number seems to be the same

XanManAE86
Club4AG Regular
Posts: 12
Joined: Mon Jan 14, 2013 10:45 pm
Location: State College, PA

Re: Late Model 4agze COP coil things

Postby XanManAE86 » Tue Apr 21, 2015 4:40 am

The gze wasted spark coils are the same as 7mgte coils. You should still be able to order them new from Toyota. If you need the wiring harness connector, its part number 90980-11246. You can order those from Toyota as well, they're pretty cheap too. Just make sure you dont flip the wires when switching connectors or it won't fire correctly.

Jeff Lange
Club4AG Enthusiast
Posts: 91
Joined: Wed Jan 09, 2013 4:04 pm

Re: Late Model 4agze COP coil things

Postby Jeff Lange » Wed Apr 22, 2015 5:33 pm

It actually depends if they're the double-lock or single-lock connectors. I believe AE92's used single-lock (90980-10609) and AE101's used double-lock (90980-11246).

Jeff

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: 4A-GE ENGINE”

Who is online

Users browsing this forum: No registered users and 6 guests