Page 1 of 1
Wiring blacktop to fire up
Posted: Wed Jun 21, 2017 10:33 am
by saigon
Ok I taught I had everything figured out but doubting myself just need a simple wiring drawing to try and fire it up what wires to just make the the engine fire up all my plugs r in place engine turns over with my push button now need spark and fuel info help thanks
Re: Wiring blacktop to fire up
Posted: Wed Jun 21, 2017 1:51 pm
by morgan
have you looked thru the DIY section?
viewtopic.php?f=28&t=4906scroll down to the "T" & "C*" plugs
Re: Wiring blacktop to fire up
Posted: Wed Jun 21, 2017 3:23 pm
by saigon
Yes just confused I have a wire from coil and one igniter don't know where to connect ( hot or ground don't know ) and the rest I think is in the right place ecu wires r conected starter is connected I can turn engine over but no spark yet .
Re: Wiring blacktop to fire up
Posted: Fri Jun 23, 2017 9:56 am
by morgan
well theres a link to another site in that thread that has the pin-outs for every connector, plus the wiring section has it all laid out as well. it should be easy to figure out the wires in question
Re: Wiring blacktop to fire up
Posted: Fri Jun 23, 2017 1:50 pm
by saigon
Just checking the sensor under coil has a blk w wire and a white wire coil and igniter hooked to get 12v but what is the white wire ( ground )?????