Removing 4ag 16v Head
Posted: Fri Feb 02, 2018 11:27 am
Will be removing the head soon to replace a head gasket. Oil is leaking underneath the dizzy clearly coming from the gasket. Between the dizzy and head gasket it is clean and dry. from what i seen on the FSM the oil passage going to the head is right there as well. Anyways, I'm putting a "shopping list" together and would like some opinions. I've always planned for tomei 264 poncams but always read i should replace valves springs so now would be a good time to do that.
Items on my list are:
-TRD .8mm Metal Head Gasket
-Supertech Valve Stem Seals
-ARP Head Studs
-Tomei 264 8.15mm
-HKS valve springs
-HKS Adjustable Cam Gears
looking for feedback or ideas if maybe its too much? am i missing something?. Not planning to go crazy with a build just something mild and a little more kick. Overall streetable. Might be worth noting i have a 4.77 R&P already and I'm very happy with the difference that has made.
Items on my list are:
-TRD .8mm Metal Head Gasket
-Supertech Valve Stem Seals
-ARP Head Studs
-Tomei 264 8.15mm
-HKS valve springs
-HKS Adjustable Cam Gears
looking for feedback or ideas if maybe its too much? am i missing something?. Not planning to go crazy with a build just something mild and a little more kick. Overall streetable. Might be worth noting i have a 4.77 R&P already and I'm very happy with the difference that has made.