• New 4A-GE 20V Blacktop engine harnesses!

Posted: **Fri Feb 15, 2013 11:33 am**

This is a brand new engine wiring harness for a 4AGE 20v Blacktop swap into a Corolla AE86 SR5. These wiring harnesses are built using new wire, new OEM terminals, and new OEM connector housings. NO CORE HARNESS REQUIRED.

For GTS cars - these harnesses CAN be used, but we need to wire in the windshield wiper plugs for your original harness. We can do this for you at no additional cost, but you will need to send your GTS harness to us.

The harness includes an EFI relay and a fuel pump relay (SR5 only) with a lead. It is guaranteed 100% plug and play.

Several looming options are available including braided sleeving and extreme-duty heatshrink looming as well as MIL-SPEC upgrades for the ultimate in harness protection and a clean show-car look:

Prices start at $449 +shipping
Add COPs - $50
Special looming (braided or heatshrink) - $180
Mil-Spec connector - $300

Standard Looming:

Braided Sleeving:

Extreme Duty Heat Shrink Loom:

Mil-Spec firewall connector:

Feel free to PM, or email me with any questions you may have!
-Cam, Tweak'd Performance

Posted: **Mon Feb 25, 2013 12:07 am**

Whats the wait time? This looks legit as hell!!

Posted: **Mon Feb 25, 2013 11:27 am**

We do have SOME in stock, but depending on your particular setup, there might be a 1-2 day build time.

Posted: **Tue Feb 26, 2013 11:57 pm**

Ok, I'd be looking for the basic harness for now. Do these come w/ the TE1 & E1 diagnostic terminals?

Posted: **Wed Feb 27, 2013 11:20 am**

Yep, we have a 2 pin connector wired in for diagnostic purposes. I currently have one set up for COPs, and one set up for distributor relocation. Both are built for an SR5, but can easily be converted into GT-S spec.

Posted: **Fri Mar 01, 2013 10:52 pm**

I would like to order a basic version with COP add on. I do need it converted to gts spec, but can u guys add the wiper connector without me having to send in my harness?

Posted: **Sun Mar 03, 2013 1:47 am**

RW Bliss wrote:I would like to order a basic version with COP add on. I do need it converted to gts spec, but can u guys add the wiper connector without me having to send in my harness?

Here too.

Posted: **Mon Mar 04, 2013 8:52 am**

We need your GT-S core harness for those connectors.

Posted: **Mon Mar 04, 2013 9:57 am**

I believe this thread belongs in the Classifieds section.

Posted: **Mon Mar 04, 2013 4:50 pm**

I'd love to know where to buy OEM harness connectors... I have to build my own harness...

Posted: **Tue Mar 05, 2013 7:43 am**

Rogue-AE95 wrote:I'd love to know where to buy OEM harness connectors... I have to build my own harness...

We sell all the OEM connectors and terminals as well. Just check out our online store!

Posted: **Tue Mar 05, 2013 1:10 pm**

I just had a look through your site. Thanks! That ends my search. I'll probably be placing an order this week.

Posted: **Thu Mar 07, 2013 11:01 am**

Rogue-AE95 wrote:I just had a look through your site. Thanks! That ends my search. I'll probably be placing an order this week.

Sounds good! We keep them all in stock!

Posted: **Mon Apr 29, 2013 2:25 pm**

Bump for you guys! Cool product. Comin to u guys soon for the patch harness!

New 4A-GE 20V Blacktop engine harnesses!

New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!

Re: New 4A-GE 20V Blacktop engine harnesses!