7AFE to 4AGE 20V BT wiring

onnaj
Club4AG Pro
Posts: 524
Joined: Mon Jan 14, 2013 9:20 pm
Location: Netherlands

7AFE to 4AGE 20V BT wiring

Postby onnaj » Thu Feb 21, 2013 6:35 am

Hello,

I've bought myself a 4AGE 20V Blacktop engine with uncut wiring and ECU. Now i'm looking for a wiring diagram for my 7AFE, i know the 4AGE 20V diagram is here already, but where is it located. I've searched and searched the site over and over again but without luck.

Besides that, who can tell which cables all have to be linked to the old harness? Should i buy a harness extender?"

Thanks folks! :)
Check my 4AGE 20V BT teardown, rebuild and transplantation over here --> http://club4ag.com/forums/viewtopic.php?f=7&t=3382

onnaj
Club4AG Pro
Posts: 524
Joined: Mon Jan 14, 2013 9:20 pm
Location: Netherlands

Re: 7AFE to 4AGE 20V BT wiring

Postby onnaj » Mon Feb 25, 2013 4:44 am

No one???
Check my 4AGE 20V BT teardown, rebuild and transplantation over here --> http://club4ag.com/forums/viewtopic.php?f=7&t=3382

ga_goosh
Club4AG Pro
Posts: 542
Joined: Thu Jan 10, 2013 12:28 pm
Location: Texas

Re: 7AFE to 4AGE 20V BT wiring

Postby ga_goosh » Mon Feb 25, 2013 1:43 pm

do you have the 7afe ecu? if so pop off the top and look at the pcb board toyota labels the wire ports on the board.

I also found this
Image
I <3 my AE86

4AG Manual
AE86 FSM

onnaj
Club4AG Pro
Posts: 524
Joined: Mon Jan 14, 2013 9:20 pm
Location: Netherlands

Re: 7AFE to 4AGE 20V BT wiring

Postby onnaj » Tue Feb 26, 2013 1:41 am

Yes i do have the 7AFE ECU, but also found the pinout.

I was hoping someone here did the conversion or either could tell me which wires should be all connected. That would've save me loads of time ;)
Check my 4AGE 20V BT teardown, rebuild and transplantation over here --> http://club4ag.com/forums/viewtopic.php?f=7&t=3382

TweakTech
Posts: 8
Joined: Fri Feb 15, 2013 11:10 am

Re: 7AFE to 4AGE 20V BT wiring

Postby TweakTech » Tue Feb 26, 2013 12:38 pm

We offer a plug and play conversion for 20V harnesses. Shoot me an email and we can discuss your project! cam@tweakdperformance.com :D