Head cc volume on 3 rib bluetop MAP setup
Head cc volume on 3 rib bluetop MAP setup
I was wondering if anyone had the full details on a specific question I had related to the head cc volume for the 3 rib blue top? Let me know! Thank you.
Re: Head cc volume on 3 rib bluetop MAP setup
What's the specific question?
oldeskewltoy has had A LOT of threads about heads & checking volume on this site, and at least 1 gotta be about that head and if he hasn't answered it, it's not a good question.
oldeskewltoy has had A LOT of threads about heads & checking volume on this site, and at least 1 gotta be about that head and if he hasn't answered it, it's not a good question.
Re: Head cc volume on 3 rib bluetop MAP setup
A standard big port 4AGE head will have a typical volume around 36 to 36.3cc’s and a chamber volume with a standard head gasket of 39cc. Note an un-cut head is 116mm (4.566”) thick. Taking a .004” thick cut on the 4AGE head will reduce the volume by about .5cc’s. If you use a thinner then stock head gasket or mill the head more the .005” you should consider getting adjustable cam gears to correct cam timing.
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Head cc volume on 3 rib bluetop MAP setup
As per the TRD Bible.......
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!